Jump to content
SAU Community

Recommended Posts

Hi guys has anyone heard of the Apexi RX6A Turbo Kit for RB25

came as complete kit for the rb25 or 26, turbo was IHI RX6A-76 here is the link it looks like a interesting bit of kit with everything you need.

i'v tried searching here and the net but not much specific info comes up for the rb25, does anyone know how much power these would make at the wheels?

Thanks guys

Link to comment
https://www.sau.com.au/forums/topic/366117-apexi-turbo-kit/
Share on other sites

RX6 turbos are awesome.

were based off Honda's F1 turbo engines and were the best around back in the early 90s.

the A-76 should be good for a tad over 300rwkw, would make a fair bit more with a larger turbine hosuing and a heap of boost.

Link to comment
https://www.sau.com.au/forums/topic/366117-apexi-turbo-kit/#findComment-5841165
Share on other sites

  • 2 weeks later...

i bought the kit, i would always see people sell there setups and end up missing out so i just bought it now my bank balance will need 6 months to recover, the turbo has some minor damage to the compressor housing but im pretty impressed with it as will all the jap brand items when they say bolt on or kit you get everything you need down to the washers if only they could produce something like this locally it would be awesome, the manifold has the t28 flange on it which means im stuck on turbo selection , any you guys know where i can source a larger rear housing to suit im hoping to run a solid 350rwkw if i can find a larger rear housing? i have to throw some pictures up when i get it.

Edited by Greekos
Link to comment
https://www.sau.com.au/forums/topic/366117-apexi-turbo-kit/#findComment-5858562
Share on other sites

killer kits, i sold one years ago and it ended up on the jms drift car which was then rebuilt by mark phillips and used in da, big power and with the right housing super responsive BUT i sold the last remaining NEW housing from japan to mark about 4 years back so there would be little chance of chasing a new one nowadays. Run it as is from the pics it looks to be one of the smaller ones anyway so... yeah bolt it on or sell it to me. This and the blitz k5 are my two favorite turbos.

Link to comment
https://www.sau.com.au/forums/topic/366117-apexi-turbo-kit/#findComment-5858617
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...