Jump to content
SAU Community

Recommended Posts

Just a question regarding 18months service, on the log book it says to replace transmission and diff oil at 30,000km, does it mean if the car is under 30,000km there is no need for replacement? My car has only done 5000k.

Cheers

Nope its 18 months or 30,000 whichever comes first so Nissan will change it no matter what. If you do kms they would have inspected your fluid at 20K and found it to be OK otherwise they would have changed it then meaning the next inspection would be at 40K and mandatory change at 50K if it checks out OK at 40K. I wouldn't be too fussed either way because a couple years ago the trans fluid change interval for JDM delivered cars went up to 60K. Can't imagine there would be any reason why ours can't be the same.

Edited by fungoolie

Nope its 18 months or 30,000 whichever comes first so Nissan will change it no matter what. If you do kms they would have inspected your fluid at 20K and found it to be OK otherwise they would have changed it then meaning the next inspection would be at 40K and mandatory change at 50K if it checks out OK at 40K. I wouldn't be too fussed either way because a couple years ago the trans fluid change interval for JDM delivered cars went up to 60K. Can't imagine there would be any reason why ours can't be the same.

Thanks fungoolie. Does it mean the aging of the fluids should not cause damage to the car? I just don't like changing things unnecessarily.

Thanks

Thanks fungoolie. Does it mean the aging of the fluids should not cause damage to the car? I just don't like changing things unnecessarily.

Thanks

Please anyone correct me if I'm wrong. But short of fluids sitting around for years I can't imagine that trans fluid in your GR6 is going to deteriorate measurably in the time period that we are talking. Engine oils might be a different matter especially if the trips have all been short and the motor not warmed up properly to evaporate off the water and acids. If mine had only done 5000 kms and it was 18 months old and had never been very hot as in seen a racetrack the only reason I'd be changing it out is to maintain my warranty and service record.

Edited by fungoolie

When I put mine in for a 5K service they said there was no point until the next service. It's really expensive stuff too at around $1200.

There is no 5K service. It must have been an xx months one? At least they aren't too pedantic on this from the looks of it... I wouldn't know. I do 25000 kms a year...:thumbsup:

Oh and there are alternatives to the Nissan Fluids. Have a look at Willall fluids if you're happy to try something different. Some NHPCs will use them with their blessing apparently.

Edited by fungoolie

Please anyone correct me if I'm wrong. But short of fluids sitting around for years I can't imagine that trans fluid in your GR6 is going to deteriorate measurably in the time period that we are talking. Engine oils might be a different matter especially if the trips have all been short and the motor not warmed up properly to evaporate off the water and acids. If mine had only done 5000 kms and it was 18 months old and had never been very hot as in seen a racetrack the only reason I'd be changing it out is to maintain my warranty and service record.

It isn't a matter of the oil deteriorating, more of a matter of contamination.

Not too sure about DSG or auto boxes but I know when change the gear oil in both my Subaru and Skyline there is ALWAYS a fine metallic sludge in there that I presume (and hope :laugh:) is my synchro gears, slowly sacrificing themselves so that I may change gears with some degree of smoothness. The longer periods without an oil change, the more of this sludge ends up in the gearbox, the more chance of the sludge getting caught where it shouldn't be and potentially causing damage.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
    • Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
    • Totally equivalent. Stock often goes from the comp cover because that's where the actuator is also installed and the factory needs 2" of hose to make the connection - and it comes as a pre-assembled unit. They totally have a boost reference from somewhere between the turbo and the throttle(s). Oh, jeez. Just do it in M12 then. We don't actually care that much. I would expect any such AN converter fitting to rely on an o-ring or some other seal onto a flat surface under the flange of the hex**, because bolt threads are no intended to provide a pressure seal. unlike..... pipe threads. **which also requires a suitably flat and smooth surface on the turbo's boss to provide the seal.
    • I also used NP   That’s were it’s seems to be the best place to fit it? All schematic shows also that it’s should be referenced from the turbo housing. But idk, I do see high hp cars without any connection or anything to their turbos, so I really don’t know how they connect their things
×
×
  • Create New...