Jump to content
SAU Community

Recommendations For R32 Gtr Gearbox Rebuilder?

shaund

By shaund,
in Western Australia

 Share

Recommended Posts

shaund Enthusiast

shaund

Posted
Posted

Hi Guys,

I've checked the consolidated workshop thread, and nothing there specifically listing for gearbox rebuilds.

My box is a bit tired with the sychro on 4th playing up when the box gets warm - its particularly bad if I hit the track...

Any recommendations would be much appreciated.

Would also be great if anyone with personal experience with this could let me know, good or bad (pm with bad to avoid the negative-post-police though :laugh: ), with an indication of price too.

Cheers!

-Shaun

tricstar Mentor

tricstar

Posted
Posted

perfect transmission in bibra lakes. :thumbsup:

yeah, what was done and how much??

I've had a box inspected locally and had quote work around town and got crazy prices, ended up sending my gearbox to "Competition Gearboxes " in Croydon over east, The guy is Simon well worth a call! He can get good rates for freight so no biggy sending it,

tricstar Mentor

tricstar

Posted
Posted

I went through a workshop so obviously they had their mark up on it, but just to have a gearbox inspected ( at the advise of the workshop, which I no longer go to ) so pulled apart and checked, then reassembled with new seals and bearings, so no gears or syncros touched cost me $1100,:sick:

Thought that was a bit steep so rang a couple of places around town ( could only find a couple that were interested or capable ) and was told that was about right ..

Got onto Simon from Competition Gearboxes, recommended by someone on here, and he said I had been stitched up ( as I suspected ) he charged about $200 for an inspection if you didn't proceed with any work. Anyway from memory I think Simon said to recon a box with syncros etc was about $800.

But ring around yourself and get some prices they should be any to quote you over the phone if you tell them you need new syncro's, seals and bearings

Competition Gearboxes 03 97233380

ohno1 Collaborator

ohno1

Posted
Posted (edited)

Hi Pal,

Thanks, have you had a box rebuilt there?

Cheers!

-Shaun

ive had a box built at perfect's, was about 6-7yrs ago now.. was a reasonably tuff auto for a blown commo i used to have, was happy with the service

actually thinking back.. that box was pretty fkn awesome haha

Edited by ohno1
tricstar Mentor

tricstar

Posted
Posted (edited)

yeah Commo box is one thing, start talking GTR box and they start quoting phone numbers$ I don't think they do enough of them locally, as apposed to Commo's etc

Anyway Shaun how did you go, get quotes? $? local ? east?

Edited by tricstar
monga Experienced

monga

Posted
Posted

The cost to rebuild a stock gear box compared the cost of a good secondhand one is much cheaper. After new Nissan parts and labour it will be near 4 or 5k. Get a replace for about 1k and you will be fine, just don't hammer 3rd.

heller44 Mentor

heller44

Posted
Posted (edited)

Went through this myself recently, even bought a secondhand box and was going to fit it and play the odds. Unfortunately it wasn't quite what was advertised, so decided against it after research.

The options I ended up with were rebuilding (competition gearboxes) or buying a decent one. Ended up finding a brand new ser3 r33 box for not much more than a rebuild. Within my budget as well.

The extra expense of rebuilding the earlier boxes is there are a few parts that are not available anymore, and you have to upgrade internals to the same as the one I bought anyway.

Edited by heller44
turboedsloth Grand Master

turboedsloth

Posted
Posted

Is the bell housing the same on the series 1,2 and 3 boxes? So say if i had my s1 box shit itself and i didnt want to repair it, could i get a later model pull style box and switch bellhousings to retain the push setup?

tricstar Mentor

tricstar

Posted
Posted

yeh should be able to change a pull to push just like you can change push to pull, basically just mount the slave on the other side of the folk..

And there is no way it costs 4-5K to rebuild a gearbox :no: well it shouldn't if you go the right place as mentioned in the replys above.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      S1 rb25/s14 starting problem

      By MBS206 · Posted

      Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
    • DraftySquash
      Looking for someone with a R34 front bar

      By DraftySquash · Posted

      Final update!!! Got the front bar fitted and sprayed and all sorted now. My cutouts worked great and the indicators aren’t just falling off. 😂  
    • Dose Pipe Sutututu
      new 1.5 LSD issues/concerns

      By Dose Pipe Sutututu · Posted

      Is this a brand new LSD? if so, have you followed any break/bed in procedure for it? Usually involves heaps of figure 8 patterns, a fluid flush.
×
×
  • Create New...