Jump to content
SAU Community

Recommended Posts

hi, im wrecking my 32 skyline and have everything except the brakes, engine and box, and loom available

car is black

has been in a front ender but not on revs so is still registerable, rego ran out last month

registerable shell: make a offer $$

complete doors, glass motors etc: $ 70 each

boot with holes for wing: $ 45

front gaurds, both have dings: $80 Pair

tail lights: $60 pair

rear bar: $ 40

lights in rear bar: $40

rear pods: $25 each

side skirts: $50 pair

standard suspension: $150 all corners

standard suspension arms and that: mae a offer $

rear craddle: $50

dash, few holes for a gauge otherwise not to bad, $50

blue dash with 119xxx k's : $75

both seats missing the plastic controls and covers on the sides, bit of wear one the foam but not torn, a few little ciggie burns on d/s seat : $100 the pair

rear seat good nic: $35

inner door cards not bad cond.: $ 60 pair

power window switches: $ 50 the pair

misc. plastic trims : make me a offer

centre console: $30

Factory floor mts, good nic: $80

most parts are ONO ive never sold skyline bits so i dont know if im being greedy or fair, but dont ask if ill take $5 for the lot

ive proberly forgotten alot but ask and ive proberly got it.

located in the sutherland shire SYDNEY

i prefer pick up dont really have time to post

imstripping the car this long weekend so come round and grab it all

it would be best to to contact me on 0430502917 as ill be working on the car all day but i will do my best to check the sight throughout the day

thanks

antonie

Link to comment
https://www.sau.com.au/forums/topic/367392-wrecking-32-skyline-lots-of-parts/
Share on other sites

Hey mate im interested in front stock suspension only as i need it for my gtr 32,

willing to separate? and also interested in rear bar reverse lights.

Edited by DVSTRK

Mate,

Got the AirCon Control Unit?

if so, can we see a pix please?

Les 0417 123 043

hi, im wrecking my 32 skyline and have everything except the brakes, engine and box, and loom available

car is black

has been in a front ender but not on revs so is still registerable, rego ran out last month

registerable shell: make a offer $$

complete doors, glass motors etc: $ 70 each

boot with holes for wing: $ 45

front gaurds, both have dings: $80 Pair

tail lights: $60 pair

rear bar: $ 40

lights in rear bar: $40

rear pods: $25 each

side skirts: $50 pair

standard suspension: $150 all corners

standard suspension arms and that: mae a offer $

rear craddle: $50

dash, few holes for a gauge otherwise not to bad, $50

blue dash with 119xxx k's : $75

both seats missing the plastic controls and covers on the sides, bit of wear one the foam but not torn, a few little ciggie burns on d/s seat : $100 the pair

rear seat good nic: $35

inner door cards not bad cond.: $ 60 pair

power window switches: $ 50 the pair

misc. plastic trims : make me a offer

centre console: $30

Factory floor mts, good nic: $80

most parts are ONO ive never sold skyline bits so i dont know if im being greedy or fair, but dont ask if ill take $5 for the lot

ive proberly forgotten alot but ask and ive proberly got it.

located in the sutherland shire SYDNEY

i prefer pick up dont really have time to post

imstripping the car this long weekend so come round and grab it all

it would be best to to contact me on 0430502917 as ill be working on the car all day but i will do my best to check the sight throughout the day

thanks

antonie

Hey, I don't have any boot plastic, I do have the rear wiper and door cards, they have black leather inserts, they have holes for 6x9's cut in them, you can have the fronts and rears plus the wiper for $100?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Have you done the Ignition Sync Wizard in the AEM software?
    • Find out what RPM it was idling at with the IACV unplugged. It's very weird that the rpm didn't change at all, and then it stalled. When it stalls is it nearly like a switch off, like you've turned the engine off? Or is it more stutters and sputters and coughs to death over a few seconds? Or does the RPM just slowly keep going down and down? Have you done a test of trying to start it with the AFM unplugged? Does it still die?     If you Follow Josh's advice on using Nistune to check the voltages (which is a perfect method!) if you see anything out of wack voltage wise, THEN get the multimeter out and read the voltage directly at the sensor. If the two vary, then you're now looking for a wiring issue vs a sensor issue. So be aware, what the ECU sees, may not be what the sensor is actually saying too...
    • You very likely need to get it on a dyno and tune it. My assumption is, you've got an RB25DET tune in it, which has a different manifold, different injectors, and different cams as a minimum. What O2 sensor are you running?   When you say it runs extremely rich from idle all the way to redline, is this just free revving it you see that?
    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
×
×
  • Create New...