Jump to content
SAU Community

Recommended Posts

For sale is my R32 GT-R V-spec II. I purchased it off an older bloke who has had it since 2006. Being a one of the last R32 GT-R's and also being a V-Spec II, it has some extra goodies like Brembo calipers and a more tightly tuned ATESSA system. I had my eye on an R32 GT-R for about a year before I stumbled across this beauty. There are NO rips on the seats at all. VERY rare on R32 GT-Rs. This is a testament to the condition of this vehicle.

Since the new engine has been in, it's done around 4000 kms bringing the odometer to a total of 37xxx kms. The oil has been changed every 6 months and not 5000 kms, as it never reaches even reaches that in half a year. The only oil that has touched this engine since I've had it is Motul 300V.

I really don't drive it much, as I have a daily to drive to and from work. This isn't an urgent sale, but I wouldn't mind upgrading to an R34 GT-R.

1994 R32 GT-R V-Spec II in KR-4 Sonic Silver

All parts were purchased BRAND NEW (if available) by either the previous owner or myself.

Engine:

60,000 km R34 GT-R engine - ($5,500 from JPC)

High Octane baffled larger capacity sump - ($1,550)

Nismo 1.5 way front diff - ($1,500)

Garrett GT35R turbo - ($1600)

6Boost manifold - ($1200)

Spitfire coil packs - ($600)

Turbosmart 50mm external wastegate - ($800)

Sard 700cc Injectors ($1000)

Sard fuel rail ($450)

Sard fuel pressure regulator ($250)

HKS adjustable cam gears ($300)

HKS 272 cams ($1300)

Trust oil filter relocation kit/10 row oil cooler ($1100)

Custom intake and heatwrapped dump/front pipes

Bosch 044 fuel pump with direct power source ($250)

Hi Octane rocker cover baffles ($270)

Gates heavy duty silicon hose kit

New braided oil and water lines

HKS intercooler ($1000)

Apexi Power FC Dejetro & hand controller ($1500)

Greddy Profec B spec II ($400)

HKS Silent Hi-Power exhaust ($1200)

Exedy heavy duty clutch and lightened flywheel ($2000)

Wheels and Suspension:

Work Emotion CR-KAI 18x9.5 +20 in MGM matte gunmetal with blue Rays duralium lug nuts ($2100)

(Can include ORIGINAL V-Spec II 17" rims)

Federal 245/40/18 all around with 90% tread ($1000)

HKS Hipermax LS+ coilovers ($1950)

Cusco camber arms

All polyethylene bushes

Sound system:

Complete Rockford Fosgate system consisting of:

T-2652S Front Splits ($799)

T-1693 Rear Coaxials ($399)

T600-4 4 Ch Amp ($1299)

Alpine CDA-117 ($529)

4 Gauge wiring kit ($149)

Etc:

N1 vents

N1 boot lip

N1 side skirts

N1 rear spats

HICAS removed and lock bar installed

Whiteline front & rear swaybars

Cusco strut bar

HKS oil cap

HKS radiator cap

Total of $30,000+ spent on parts alone on top of purchase price.

That's all I can remember off the top of my head. I'm sure there is more I've forgotten to list. Has been tuned to make around 440rwhp @ 18 PSI by Sean at All Star Garage. Could make more with a re-tune as this was a conservative tune. I have the dyno sheet for serious buyers.

If you're looking for a cheap, neglected R32, look elsewhere. On the other hand, if it's an immaculate, no more money to spend GT-R you're after, give me a call on 0466653693. I can guarantee you won't be disappointed.

Car is located in Perth, W.A.

Price is $28,000 or nearest offer

post-72307-0-80970600-1307915100_thumb.jpg

post-72307-0-37313300-1307915112_thumb.jpg

post-72307-0-33088700-1307915122_thumb.jpg

post-72307-0-07564200-1307915131_thumb.jpg

post-72307-0-03960600-1307915141_thumb.jpg

post-72307-0-40410200-1307915147_thumb.jpg

post-72307-0-55668100-1307915157_thumb.jpg

post-72307-0-27979000-1307915167_thumb.jpg

post-72307-0-79009500-1307915174_thumb.jpg

post-72307-0-36064900-1307915182_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/367554-r32-gtr-v-spec-ii/
Share on other sites

  • 3 weeks later...
  • 3 weeks later...

That looks like the parking lot outside Domino's myaree etc :P

Mate, All the best with sale. If it were a few months down the track i'd snap this badboy up in an instant. Certainly one of the nicest 32s i've ever seen. I hope she ends up in a good home thumbsup.gif

That looks like the parking lot outside Domino's myaree etc :P

Mate, All the best with sale. If it were a few months down the track i'd snap this badboy up in an instant. Certainly one of the nicest 32s i've ever seen. I hope she ends up in a good home thumbsup.gif

Haha nice spot! Are you from Perth as well? banana.gif

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...