Jump to content
SAU Community

Recommended Posts

I noticed yesterday that my clutch is leaking a lot of fluid from where the shaft (the one kinda attached to the clutch pedal) goes into the master cylinder.

I'm guessing a seal is gone, but can anyone offer up any advice asap. Is there anything I can try short of taking it somewhere because I'm a bit short on funds atm :

Thanks

46n2

Link to comment
https://www.sau.com.au/forums/topic/36757-help-asap-cluch-leaking-fluid/
Share on other sites

  • 2 weeks later...

Funnily enough - I found that exact problem today as well. I have clutch fluid dripping down onto the clutch pedal and the floor. It's not leaking very fast but I had to top up the fluid today - I caught it when it was about 2mm from the bottom of the fluid reservoir.

46n2 - is the fluid leaking inside the car like mine?

MearCat : Yeah, it's leaking inside the same as yours :D I've spoken to a few ppl and they think i'll be in need of a new master cylinder. I'm holding off for a few days to confirm. I'll post back and let u know...

46n2

  • 2 weeks later...
  • 4 weeks later...
  • 7 months later...

nooooo. $250 ouch....

in future guys.....

go to your local clutch place. and ask for a rebuild kit. should be about $10.

it will be a rubber seal. then you just replace the rubber seal on yours. and bolt it back in.

thats all that is needed to be done. i had a problem on mine and i solved it this way.

if you dont want to go to the hassel of rebuilding it...

i have got a spare one i'd sell.

it doens't leak. i doubled up when i didn't know what to do...

hehe...yeh i've got the same problem.....always a wet patch on my floor mat under

clutch pedal...and refillin the clutch master cylinder every couple of weeks.....

anyways...like dabigbolf said....i went and got a rebuild kit from nissan...

only cost me $40..

kit contains complete piston, return spring, piston stop ring, o-ring and the boot - all brand new....

if you going this way best idea is to give the cylinder a nice honing to insure the seal beds

in smoothly..

$250 is a bit steep....so $40 and a lil diy is ALOT lighter on the wallet......

Clutch Master Cylinder.

$250 is a bit of a RIP.

I bought mine for around $60-$70 from a local brake/clutch shop in St. Mary's.

It is made by PBR.

I may be able to dig up some old photo's of the box & part number.

Bl4ck32 also recently replaced his and knows the exact price as I replaced mine 2.5years ago.

Also guys remember when taking on the $40 kit rebuild option - IF your master cyl has scores in the bore it will need to be re-sleved or replaced which will end up costing you more money in the long run.

So before you buy the kit - it may be a good idea to take the master cyl off and taking it to a clutch place for assesment before spending your money.

I have encounterd the same problem on another car we had used that was 15 years old and from japan.

Does the clutch slip when powering down from 1st to 2nd when you shift really fast, once you back off quickly ( when you noticed its slipping ) .and give it gas it stops slipping ?

If thats the case, your stopper for the clutch pedal can be the problem.

petar.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • KW only offers a set for the R32 GTR. Popular options are D2 racing, Ksport or Öhlins. I have a D2 Racing coilover set, though I don't know for sure which one.
    • Well, the good news is you have more than one very good option for new coilovers in and around your country. Worth the drive over to KW to talk about GTR stuff.
    • Fair enough, I am in no way a tire expert so I'm not familiar with all the terms and conditions. I'll definitely note down the AD09 to potentially try in the future. Rain is not too big of a concern for now as I will probably only drive in the rain when I have to. And considering I still lack experience driving the GTR I'd more than likely take it easy too. I have coilovers in the car but as I barely got to drive so far I never bothered to even check if they are adjustable haha. The suspension is almost entirely old and worn as well so I suppose when I eventually fix that in the future that would make a huge difference.
    • There's not a great deal to report here .... except ...... FOR .... LSD!!!  I bought a Quaife LSD from the UK and shipped it here .... Wish I'd just bought locally cause the shipping and duty was $700! But there were so many diffs used in the E90s I just wanted to be absolutely certain I was getting the right one so I spoke with a supplier in the UK who builds race cars and they have heaps of experience with the E90s.  I pulled the diff out which was seriously awesome - I've never done anything like that before, I must have watched 1000 videos on YT about it as well as consulting the Bentley manual. It was super easy in the end. The diff was delivered to the awesome folks at Hornsby Diffs and will be back in a few weeks. I also replaced the diff bushings with some Nolathane ones.  Really looking forward to getting it back and getting back to the track or even the skidpan.
    • yeah... the 13kg/mm springs weren't always in there, I had 10kg/mm but doing a few SMSP commanded heavier front springs. It's so good now going into T1 and T2, just need more seat time and real tyres.
×
×
  • Create New...