Jump to content
SAU Community

Recommended Posts

hey guys just tested the dynolicious ipad app and came up with 238bhp with just a turbo back exhaust and apexi pod with stock boost in very wet conditions, pretty happy with the result, i had the car weight at 1450kg and drivetrian loss at 18% and the road was very flat, how do these results sound?

Link to comment
https://www.sau.com.au/forums/topic/367865-dynolicious-test/
Share on other sites

the only reason i tried it is because of a review on youtube

and it seemed pretty accurate, but the dyno never lies,, might book in at black track and get a real reading then do a run at eastern creek, i will post the results

just refrence i found this in the forum,, times seem pretty accurate

first test run:

Actual data from motorplex:

ET: 14.73 @ 158.98kmph

60': 2.54

330': 6.46

660':9.68

1000':12.43

iPhone app data:

ET: 14.75 @ 157.9kmph

60': 2.36

330': 6.34

660':9.60

1000': 12.4

second test run:

Actual data from motorplex:

ET: 14.89 @ 159.32kmph

60': 2.71

330': 6.65

660': 9.83

1000':12.59

iPhone app data:

ET: 15.28 @ 152.9kmph

60': 2.72

330': 6.79

660': 10.06

1000': 12.91

my best run for the night was a 14.45 @99.33 mph, wasnt a good launch or change into 4th either, so i know it can go faster

i dont think failed can be deemed as an accurate result at this point,,,maybe im just a dumb dumb

i think the HP figure is out though calibration such as drivetrain loss and weight could be a factor, but the 1/4 mile times seem spot on with the real deal,,, im going to test on the dyno and the track after i hit up the weigh bridge before i delete it,,, to many reviews on youtube with good results by reputable sources

i know they are american, though i dont think it's a lie.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • This looks great! Awesome to have the 5 speed with an LSD in this. The Recaro's look like SR2's or SR3's. It's a shame they've been retrimmed as they would have looked sweet in their original colours. I think I'd want my agent to be a little more up front and informative too. I've never imported but I reckon it would make me a little nervous, so the more info the better.
    • Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
    • My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
×
×
  • Create New...