Jump to content
SAU Community

Recommended Posts

  • 2 months later...
  • Replies 98
  • Created
  • Last Reply

Top Posters In This Topic

hey buddy letting you know im not a scammer i asked for a standed r32 GTR turbo that was ingood working order and has no turbo play and what did i get , i got an r32 gtr turbo that and been high flowed by atleast 5 mill so clearly not standered dick head and it had a f**k oil line , huge spilt in it whitch means the turbo had been running with no oil at some point and it needed a rebuild , so clearly not in good working condition , so i thought f**k you , you can wait to get you dodgy as f**k turbo back , ohw and your POS TURBO SHOULD BE AT YOUR DOOR STEP BY NOW SENT IT TO YA LAST WEEK

Edited by tranf4m
Link to comment
https://www.sau.com.au/forums/topic/367999-tranf4m/page/2/#findComment-6025248
Share on other sites

Biggest douchebag holy shit, somebody ban his IP so he can't rip anyone else off on these forums. Strangely enough I make it a rule not to deal with people who A) Can't type for shit and B) Use their own fonts, colours and sizes instead of the standard.

Link to comment
https://www.sau.com.au/forums/topic/367999-tranf4m/page/2/#findComment-6025712
Share on other sites

look at it how you want cant do shit i sent peace shit turbo back to him,i hope he resel the heap of shit to one of you f**k heads ... if he had of sold me what i wanted in the 1st place whitch he SHOULD OF COCK SUCKERS wouldnt of had this issue . think about it

Link to comment
https://www.sau.com.au/forums/topic/367999-tranf4m/page/2/#findComment-6026780
Share on other sites

hey buddy letting you know im not a scammer i asked for a standed r32 GTR turbo that was ingood working order and has no turbo play and what did i get , i got an r32 gtr turbo that and been high flowed by atleast 5 mill so clearly not standered dick head and it had a f**k oil line , huge spilt in it whitch means the turbo had been running with no oil at some point and it needed a rebuild , so clearly not in good working condition , so i thought f**k you , you can wait to get you dodgy as f**k turbo back , ohw and your POS TURBO SHOULD BE AT YOUR DOOR STEP BY NOW SENT IT TO YA LAST WEEK

Haaaaaaaaaahahahahaa you're a f**kin douchelord.

That is all.

Link to comment
https://www.sau.com.au/forums/topic/367999-tranf4m/page/2/#findComment-6026880
Share on other sites

f**ken oath. Some people are just f**ked. I tried to buy a turbo from a guy on here several months back and he simply just wouldn't post it. He kept asking me over and over if I had the money. f**ken dur, would I go shopping with no money? But then some people on here are good as gold. Like a young fella called Don (skyzthalimit) that sorted me out with a fuel pump, a z32 afm and a profec A boost controller. The pump and the z32 are still going strong and the boost controller was rooted. I called him up and he said "No worries man just come down and I'll refund your money". And he did. If I had to fly somewhere to get my shit back it would be a motec tune with anti-lag, traction control, flatshifting and individual cylinder correction. And I would run it on the dyno till it popped.

Subscription in the mail.

Link to comment
https://www.sau.com.au/forums/topic/367999-tranf4m/page/2/#findComment-6027333
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
×
×
  • Create New...