Jump to content
SAU Community

Recommended Posts

  • 2 months later...
  • Replies 98
  • Created
  • Last Reply

Top Posters In This Topic

hey buddy letting you know im not a scammer i asked for a standed r32 GTR turbo that was ingood working order and has no turbo play and what did i get , i got an r32 gtr turbo that and been high flowed by atleast 5 mill so clearly not standered dick head and it had a f**k oil line , huge spilt in it whitch means the turbo had been running with no oil at some point and it needed a rebuild , so clearly not in good working condition , so i thought f**k you , you can wait to get you dodgy as f**k turbo back , ohw and your POS TURBO SHOULD BE AT YOUR DOOR STEP BY NOW SENT IT TO YA LAST WEEK

Edited by tranf4m
Link to comment
https://www.sau.com.au/forums/topic/367999-tranf4m/page/2/#findComment-6025248
Share on other sites

Biggest douchebag holy shit, somebody ban his IP so he can't rip anyone else off on these forums. Strangely enough I make it a rule not to deal with people who A) Can't type for shit and B) Use their own fonts, colours and sizes instead of the standard.

Link to comment
https://www.sau.com.au/forums/topic/367999-tranf4m/page/2/#findComment-6025712
Share on other sites

look at it how you want cant do shit i sent peace shit turbo back to him,i hope he resel the heap of shit to one of you f**k heads ... if he had of sold me what i wanted in the 1st place whitch he SHOULD OF COCK SUCKERS wouldnt of had this issue . think about it

Link to comment
https://www.sau.com.au/forums/topic/367999-tranf4m/page/2/#findComment-6026780
Share on other sites

hey buddy letting you know im not a scammer i asked for a standed r32 GTR turbo that was ingood working order and has no turbo play and what did i get , i got an r32 gtr turbo that and been high flowed by atleast 5 mill so clearly not standered dick head and it had a f**k oil line , huge spilt in it whitch means the turbo had been running with no oil at some point and it needed a rebuild , so clearly not in good working condition , so i thought f**k you , you can wait to get you dodgy as f**k turbo back , ohw and your POS TURBO SHOULD BE AT YOUR DOOR STEP BY NOW SENT IT TO YA LAST WEEK

Haaaaaaaaaahahahahaa you're a f**kin douchelord.

That is all.

Link to comment
https://www.sau.com.au/forums/topic/367999-tranf4m/page/2/#findComment-6026880
Share on other sites

f**ken oath. Some people are just f**ked. I tried to buy a turbo from a guy on here several months back and he simply just wouldn't post it. He kept asking me over and over if I had the money. f**ken dur, would I go shopping with no money? But then some people on here are good as gold. Like a young fella called Don (skyzthalimit) that sorted me out with a fuel pump, a z32 afm and a profec A boost controller. The pump and the z32 are still going strong and the boost controller was rooted. I called him up and he said "No worries man just come down and I'll refund your money". And he did. If I had to fly somewhere to get my shit back it would be a motec tune with anti-lag, traction control, flatshifting and individual cylinder correction. And I would run it on the dyno till it popped.

Subscription in the mail.

Link to comment
https://www.sau.com.au/forums/topic/367999-tranf4m/page/2/#findComment-6027333
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • 310mm rotors will be avilable from Australia, Japan, and probably a few other places. Nothing for the front can be put on the back.
    • The filter only filters down to a specific size. Add to that, the filter is AFTER the pump. So it means everything starts breaking your pump even if its being filtered out.
    • Just like in being 14mm too small (296mm) makes it not fit, being 14mm too big (324mm) it also won't fit. You want to find the correct rotor.
    • @GTSBoy Ok so that was the shops problem...they showed R33 rotors on R34 page and i did not know 296 do not fit(and are for R33) Yes i bought "kit" with rotors and pads. Pads are ok(i have GTT calipers front and rear). They have some 324mm but no 310mm. So i dont know if they would fit. I have 17inch LMGT4s So another question. Can i fit those in the rear or they are just "too" big for that?
    • I started removing the tank a while back with the intent to give it a proper clean. Got to a bolt that I couldn't undo completely due to a diff being in the way, so just said f**k it and siphoned the gluggy old fuel out and called it a day. Looking it the tank it looks less corroded than the one in the pics for that billet hanger from Frenchy's anyway. Isn't it the fuel filters job to worry about this stuff? I scraped off most the crusty shit of the hanger but will give it another go before reinstall coz maybe the fuel and return pipes are also full of gunk  
×
×
  • Create New...