Jump to content
SAU Community

Recommended Posts

  • Replies 47
  • Created
  • Last Reply

Top Posters In This Topic

I've raced an autech and it was slower then my rs4s. Maybe just a bad day for the autech but my turbo only held 10psi for 1000rpm before fading down to the poo level of 4-5psi. I think that there may be easier power making mods with the 26 but stock 25 and 26 appear pretty identical.

And hell yes rbd2 I want to see a pic

Is this the same race where you beat a VE SS Sportswagon and your boss's F6?

:rofl2:

jks!

you can easily extract more power out of the rb26 for less $$$$ basic exhaust, more boost and retune should net you 200-220awkw

same mods on a rb25 will only get you 170-180awkw.this of course doesn't take into account the difference in purchase price(which was only $5g when i bought my rs4

i know from personal experience thru the hills, the autech walks away from my stagea and we have the same basic mods, and my car isn't crazy slow either.

If you beat an autech only running 4-5psi then i suspect he wasn't really racing.:thumbsup:

Ironpaw -i understand your joking but go find yourself a ve redline ute and have a race, from 80-150/160 I sat beside him then he crept away. At 180 speed cut his tail lights were only a few meters in front of my headlights. That's the closest race I've had so far. But that said. I miss my stock turbo :'(. Stupid hypergear turbo is driving me nuts.

Big fella - I got mine 4years ago. At the yard an auto was 15990, manual 21990 and 260rs 29990. The only thing I regret is having un replaceable brake pads.

Edited by lilcrash

It drives fine, it's getting a nice consistent 7psi until high in the revs then in a matter of 300/400 rpm hits boost cut 14psi so I can't go above 5000rpm when the cams hit and my car should be going its best basically

Edited by lilcrash

It drives fine, it's getting a nice consistent 7psi until high in the revs then in a matter of 300/400 rpm hits boost cut 14psi so I can't go above 5000rpm when the cams hit and my car should be going its best basically

so its boost creeping?

why dont you get a bigger puck welded on and largen the internal wastegate.. mines currently doing it at 22psi.. hypergear said they'd do it for $120 i think.. should definitely stop your creeping issue

It doesn't do it all the time, it's like the wastegate gets stuck open then suddenly jams closed. If you move the wategate by hand it does get stuck but where the sticky spot is it shouldn't open that far.

then your actuator reach is to long.

or you dont have pre load so its already a little opened, so when it completely opens, perhaps it opens to much...thats alot of opens..

i'de be speaking to hypergear as it obviously should be happening.

He said there is no way it would reach that far. It's got about 6mm of preload

get an air compressor connected to the boost signal like to the actuator. and se how many degrees it opens.

to a shop its always a case of "nah will never do that" as they then dont have to fix theyre fault.

if your having issues like that its definitely not safe. hence the reason im on eFlex

The turbo was originally fitted with a high pressure actuator made to hold 18psi. Been told its too strong so I sent him a low pressure actuator. I have no idea how that was fitted as well as the rest of the bits. The actuator only pushes about 60 degrees out of a 33mm disc covering a 30mm gate which's not enough for it to hit the backing housing and if it does jam open then we should see very low boost.

When I sent the low pressure actuator I don't have the turbo on front of me and I don't how long the rod needs to be but longer is always better then shorter, so if its too long then just cut and thread it down to size, and 6mms of preload is way too much, should be 3mm. I don’t get how it can run 14psi then goes back to 7psi. I have a feeling some of the vacuum plumbing is a bit strange or it is too much actuator preload. I'm guiding a novice DIYer and its pretty hard work. :/

The car's needs injectors and a tunned for 18psi. Its not going to make much more power with stock tune and factory boost. And have to say its doing pretty good keeping up with a RB26dett stegea.

I'm in no way a novice DIYer. Most of my job is custom fabrication.

The high pressure actuator gives in stable boost as the wastegate is held open.

There is no vacuum out put on the turbo outlet so I have used the nipple on the next piece of pipe to the intercooler.

Next point. It's got 6mm of preload because that's all the thread that's on there, at 3mm preload it barely had any boost.

I only wish to run 10psi until I get the other parts.

JUST SO EVERYONE KNOWS. THE ATR43SS-1 THAT I GOT FROM HYPERGEAR ISNT CAPABLE OF LESS THEN 16/17 PSI. SO BEWARE.

Edited by lilcrash

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...