Jump to content
SAU Community

R35 Engine Replacement Problem

Dominic

By Dominic,
in R35 GTR

 Share

Recommended Posts

Dominic Rising Star

Dominic

Posted
Posted

After blowing the engine of the R35 into 4,823,163 pieces (Yes I counted) I decided to get my local mechanic to fit the engine rather than doing the sensible thing and send it to Martin at Willal.

WELL on opening up the lines etc there are pieces of engine in the oil cooler, in the filter in all the oil lines we even found a gudgeon pin in the throttle body.

We are going to flush everything out but how can we be sure that there is no shrapnel left in the circulatory system of the car.

Link to comment
https://www.sau.com.au/forums/topic/369242-r35-engine-replacement-problem/
Share on other sites
Birds Grand Master

Birds

Posted
Posted

:O

There's probably no easy way to do that, other than manually disassembling all connections and peering into / flushing them. Assuming fluid can sufficiently pass through the circulatory systems when you flush them, they should be safe. Worst case scenario something dislodges down the track and blocks up the works, but shouldn't cause instantaneous catastrophic damage unlike things trapped in the intake.

The intake and breather side of things is, at the least, what I'd be pulling apart piece by piece and either replacing or making sure they are free of shrapnel. Anything that can make its way into the throttle body etc.

Metal detector / stud finder might be of use?

Beer Baron Grand Master

Beer Baron

Posted
Posted

replace the oil cooler cores. too many fine passages in there and just too big a risk to flush and hope for the best after a catastrophic blow up. remove and flush all the oil system lines and even the cooling system (un-usual for stuff to get into the coolant circuit though). as far as inlet goes I'm sure head has been replaced/rebuilt so just need to remove the inlet and exhaust manifolds and clean them out properly.

Dominic Rising Star

Dominic

Posted
  • Author
Posted

I guess I'll be the first to ask....

how did it happen?

F....d if I know!

Just driving through turn 9 (The one after Corporate Hill) at Eastern Creek when I heard a huge bang.

I thought it was a tyre blow out until the car came to a slow halt leaving bits and pieces of car across 800 metres of track

Ant97GTR Grand Master

Ant97GTR

Posted
Posted

If you are concerned even after flushing and pulling stuff apart consider mesh filters in various supply lines to the engine (coolant/oil etc etc) after putting back together. Similar to the ones used in dry sump setups.

domino_z Mentor

domino_z

Posted
Posted

F....d if I know!

Just driving through turn 9 (The one after Corporate Hill) at Eastern Creek when I heard a huge bang.

I thought it was a tyre blow out until the car came to a slow halt leaving bits and pieces of car across 800 metres of track

warranty? or was it mod'd?

saliya Rising Star

saliya

Posted
Posted

After blowing the engine of the R35 into 4,823,163 pieces (Yes I counted) I decided to get my local mechanic to fit the engine rather than doing the sensible thing and send it to Martin at Willal.

WELL on opening up the lines etc there are pieces of engine in the oil cooler, in the filter in all the oil lines we even found a gudgeon pin in the throttle body.

We are going to flush everything out but how can we be sure that there is no shrapnel left in the circulatory system of the car.

SURE = 100%. You cannot be sure. Apart from replacing the entire system.

But you can be reasonably sure. Flush lines and components with solvents, look at the outflow.

Throw stuff that has small gaps (e.g. oil coolers), hope for the best.

Cheers,

SW

  • 4 weeks later...
  • 2 weeks later...
  • 5 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Marek
      Hi everyone.

      By Marek · Posted

      Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • ARB26
      S1 Autech 260RS Wiring Diagrams

      By ARB26 · Posted

      Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • DanMac34
      R34 Speedo not working after manual swap

      By DanMac34 · Posted

      Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • joshuaho96
      Speed Sensor replacement

      By joshuaho96 · Posted

      Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • QB6SAGR
      Tein Circuit Master- rebuild worth it?

      By QB6SAGR · Posted

      Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...