Jump to content
SAU Community

Recommended Posts

  • Replies 164
  • Created
  • Last Reply

Top Posters In This Topic

Sorry to detract from thread but is the bore 88mm and has block been sleeved?

Both, 88mm without sleeving is not reliable. The bore is either 88 or 89mm. will have to check.

Matt

Matt, If those dumps are the Tomei Series 1's and not cracked I will take them.

they are the larger series, I have Yasky who wants the turbo's and dumps. If I don't hear back by 6pm from him they are yours..then blue_vl_t has next dibs.

Matt

Head also has a Hi Octane rear head drain installed.

RB26 Head $3000 with:

JUN IN EX 264 9.5mm CAMs

Tomei Type B valve springs

New Valve stem seals

1mm Over Valves

Ported by PM engines for max response and hp (the right way..not enlarging the ports)

Deshrouded valves

faced

ARP cam stud kit

OS Giken Adj Cam gears

Black Crinkle coat rocker covers and plenum $450

R34 center emblem

included- valley cover, rocker covers, timing belt cover and plenum

or

With Mines Triple flow cam baffles $550

Edited by BoostdR

are you selling injectors? if so details!

Injectors are sold already.

I would go the Bosch 2200cc with the 11mm adaptor/extender and plug. You just remove the plastic tip. Simon at Morpowa here in SA has a set on the shelf. Only around 165-180$ each. They are much cheaper than ID2000's and in our testing just as good. There are fakes on ebay that use the bosch blanks...these are very bad.

Matt

Xenon Headlights Sold pending payment

evilGTR is second dibs on these if the sale falls through

Kanny is third dibs on these if the sale falls through

Sciro has forth dibs

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
    • When you pulled it off, there is no signs of blown head gasket? Is it possible you have some other issues going on? Possible cracked blocked? Or do you think it's straight up lifting the head? Did you check what the head was torqued to before pulling it down (To see if possibly they're stretching, or starting to break threads out etc)?
    • Seems like a decent result for a modded JZX110. They are bulky in comparison to the 100 and 90 models (which I'd prefer myself) but they are getting very few and far between here in JP these days. Thanks for the detailed review and the import process into the UK. I also have a car which I'm hoping to export from Japan at some stage so it's good to know if someone from the UK was interested in it. By the way the corrosion underneath is par for the course for cars which were located in/near the mountains or along the Japan sea coastline. They get huge amounts of snow every winter and the sodium chloride is used on the roads. Many cars have some kind of rubber like treatment underneath but they tend to limit it to the wheel arches underbody and fuel tank. Suspension arms and sub-frames will have similar corrosion to your JZX110 which is a common sight. See it all the time and car dealers here generally don't even mention it unless asked.
    • If the sound goes away when you clutch in, the 1.5/2 way diffs are just shit, and you are a normal person. The diff is likely "fine" but driving at anything under 30kmh is a violent horrible experience. It would be exaggerated with solid diff bushings and subframe bushings if you have those.
×
×
  • Create New...