Jump to content
SAU Community

Recommended Posts

R32 GTR 1991

Selling for a friend. Matt can be contacted on 0411 781 741

Regrettable Sale - New P Plate Laws. im not allowed to drive a turbo car anymore

Makes a really responsive and Reliable 270Rwkw on very safe tune running 18Psi. I had -5's and didnt like the lag.

Car made 320rwkw with then running 18Psi but it feels almost faster now having so much more time in boost.

will easily make more power with more boost, air flow meters amd cams.

GT-C Volk 18x9's all round with custom GTR offset

Built Motor (done about 2,000 k's since build)

Chemical clean all parts, full machine,clearance and blueprint spec, ACL comp bearings, JE forged piston kit, H-beam rods,

MLSR steel head gasket, oil restrictors, genuine nissan gasket set, tensioners, Recon head, complete assembled from sump to rocker covers.

all new hoses

new genuine thermostat

new water pump

new timing belt

nismo radiator cap

new battery

new heater core

regassed Air conditioner

nismo diff bushes

cradle spacers (pineapples)

600cc injectors

nismo plugs

Garret 28/60 -7's

Apexi Power FC with Hand Controller

Full 3" Kakimoto Exhaust

Blitz 4stage Boost Controller

R33 GTR Crank

N1 Oil Pump

Momo Steering Wheel + Gear Knob

'Top Secret' Carbon Fiber Dash/Console Surround

Custom Leather Interior

Tomei 310km/h Dash Cluster

New slotted rotors all round (DBA)

Extreme heavy duty motor sport clutch

Koyorad radiator

custom buzzer/Warning light (oil pressure, coolant level, water temp.) better then trying to watch gauges whilst driving.

Central Locking/Alarm

Good stereo (alpine headunit, Focal Splits and rears, Basic sub/amp setup)

Baffled sump

Always has run fully synthetic oil

Always kept off the limiter

Never been launched

Brand new tires

Im sure there is things I have missed. Photos do not do the car justice.

Car owes me 50k. have receipts for the last 15k spent a month ago

regrettable sale, but i cant legally drive it for the next 2 years

Im after 27k ONO and im aware im asking a high price but its one of the best 32 GTR's in SA.

Has been featured in HPI.

post-31301-0-65381800-1309590904_thumb.jpg

post-31301-0-82769900-1309591156_thumb.jpg

post-31301-0-03854700-1309591352_thumb.jpg

post-31301-0-11545600-1309591441_thumb.jpg

post-31301-0-27877400-1309591665_thumb.jpg

Edited by Chris_A31
Link to comment
https://www.sau.com.au/forums/topic/369733-r32-gtr-sniper/
Share on other sites

owned the car about 3 years man, no my x does not come with the car. And your welcome to msg me for a look. 0411 781 741

:blush: at your X or your GTR - (jks)

But seriously with chicks if she's an X there's generally a good reason.

Send pm shortly..

Link to comment
https://www.sau.com.au/forums/topic/369733-r32-gtr-sniper/#findComment-5898578
Share on other sites

Forgot to mention Bosch fuel pump,

Cars got to go, I am not allowed to drive it!

PRICE DROP 25k FIRM

There's other 32 GTR's on the forums for 20-22 but they arn't forged motors, nor do they have amazing wheels or interiors. Priced to go.

0411 781 741 if you have any questions

Link to comment
https://www.sau.com.au/forums/topic/369733-r32-gtr-sniper/#findComment-5903802
Share on other sites

  • 2 weeks later...
Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • If you take the top half of the intake off you can unbolt the flap off the shaft and leave the shaft in there blocking the hole. Then you can remove the little vacuum canister off from under the manifold and get a spare vacuum line to run to the ECU. I can take some photos of it later. Probably best to get the vacuum source to the ECU sorted first though. Mine all worked mint with the base map from the GTT an I've pretty much let the closed loop sort the fueling and took 1 degree out of the whole timing map.
    • This IS something you also have to configure in Haltech (or at least I did in the past when going from onboard-to-ECU map sensor and an external MAP sensor in haltech land).
    • I'm hoping it's something as simple as the ECU is looking for an external MAP sensor, but he is trying to use the onboard MAP sensor.
    • You won't need to do that if your happy to learn to tune it yourself. You 100% do not need to do that. It is not part of the learning process. It's not like driving on track and 'finding the limit by stepping over the limit'. You should not ever accidently blow up an engine and you should have setup the ECU's engine protection to save you from yourself while you are learning anyway. Plenty of us have tuned their own cars, myself included. We still come here for advice/guidance/new ideas etc.  What have you been doing so far to learn how to tune?
    • Put the ECU's MAP line in your mouth. Blow as hard as you can. You should be able to see about 10 kPa, maybe 15 kPa positive pressure. Suck on it. You should be able to generate a decent vacuum to about the same level also. Note that this is only ~2 psi either way. If the MAP is reading -5 psi all the time, ignition on, engine running or not, driving around or not, then it is severely f**ked. Also, you SHOULD NOT BE DRIVING IT WITHOUT A LOAD REFERENCE. You will break the engine. Badly.
×
×
  • Create New...