Jump to content
SAU Community

Recommended Posts

Hi ppls :wavey:

I am currently doing the things to the R34 that everyone does, clutch, cooler, boost etc etc.

I didn't start buying the HPI issues with the Project R34 in it until half way through and I would really like to read the articles.

So, who has all the issues and would be so kind as to loan them to me so

i could copy them folr my own personal uses???

Cheers

BASS OUT

I'm in the eastern suburbs of Melbourne

Link to comment
https://www.sau.com.au/forums/topic/37005-hpi-issues/
Share on other sites

CR34ation,

Just upped the boost, thanks to DR Drift.

Power FC under my deck at work

Apexi GT Spec cooler on its way

Cusco super light (4.2kg) flywheel on its way

Exedy clutch on order.

The bug has bitten, hard.

I will list the issues tomorrow for the HPIs with the R34.

Thanks Guys

Link to comment
https://www.sau.com.au/forums/topic/37005-hpi-issues/#findComment-740883
Share on other sites

stories on the R34 appeared in issues 20,21,22,23,24,25,29,32,33,34 and 37.

Part 6 was spread over three issues because it was very involved.

Thanks guys.

Maybe I could pick up some issues tomorrow at the Dyno Day??

CHEERS

Link to comment
https://www.sau.com.au/forums/topic/37005-hpi-issues/#findComment-743825
Share on other sites

didnt see you at d-day BASS, you must have left b4 i got there?

I have ALL of the issues from 21 onwards, I wouldnt mind getting issue 20 if someone has no use for it?

Also have the dvd's with project 34 in it :( 3,4,5,6...dont have 7 yet though.

Link to comment
https://www.sau.com.au/forums/topic/37005-hpi-issues/#findComment-745979
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
    • I assume clearances were all a-okay?
    • Shock tower brace is in +5Kw....LOL  
×
×
  • Create New...