Jump to content
SAU Community

Recommended Posts

Definitely need to know what turbo youve got before you can select a housing. You may find replacing the housing will fall short in benefit to replacing the whole turbo.

Can you please state what your aim of changing the housing is so we can comment on a better solution if possible?

Also, not knowing your turbos actual spec gives me the impression it may be a cheaply made thing and you could be blowing hard earned dollars in the wrong way. There are many options around the $1k mark these days that will easily replace what you have and possibly exceed your aims for the change.. Chances are buying a garrett housing OR moddifying another one to suit your 'hybrid' turbo will cost similar money and wont necessarily hold the gains you seek.

Link to comment
https://www.sau.com.au/forums/topic/370081-rear-housing/#findComment-5900241
Share on other sites

And inducer/exducer refer to the smallest and largest diameters of the wheel in question respectively. Irrespective of compressor or turbine.

Just to clarify.

you sure bout that? isnt the inducer the diameter that draws the air/gas in and exducer the diameter that expels the air/gas?? so the 60mm being talked about is the turbine inducer diameter isnt it??

Link to comment
https://www.sau.com.au/forums/topic/370081-rear-housing/#findComment-5900264
Share on other sites

Nag its not a cheap setup the previous owner spent 3500 on getting the turbo custom made buy a bloke here reason I'm changing is cause it was on an Sr20 and its now going on a 26/30 so going a bigger rear and also I have a twin scroll manifold so need a housing to suit that forgot to get turbo today so I will get it tomorrow and take some measurements

Link to comment
https://www.sau.com.au/forums/topic/370081-rear-housing/#findComment-5900558
Share on other sites

you sure bout that? isnt the inducer the diameter that draws the air/gas in and exducer the diameter that expels the air/gas?? so the 60mm being talked about is the turbine inducer diameter isnt it??

Yea thats how I have an understanding of it

Link to comment
https://www.sau.com.au/forums/topic/370081-rear-housing/#findComment-5900563
Share on other sites

so took a better measurement before didnt have the right tool before was just going bye eye n a ruler lol

turns out i have a 66mm inducer and a 56mm exducer cant seem to find any info on the as to what rear housing to buy anyone got any ideas?

been having a look around and the garret t31 housing i have on there atm soom to suit gt30/gt35 and its definetly a bigger than 60mm wheel (gt30) so im guessing it has to be a housing to suit gt35?

Edited by t04z
Link to comment
https://www.sau.com.au/forums/topic/370081-rear-housing/#findComment-5905830
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...