Jump to content
SAU Community

Recommended Posts

MIDORI SEIBI TITANIUM FRONT DOWN PIPE 80mm

This is pretty much same specs as the Mines titanium down pipe and will fit GT-R 32, 33 & 34

Brand new item which I bought earlier this year but have since had a custom pipe made to suit my exhaust.

Therefore I dont have a need for this and would like to send it to a good home.

These are a piece of art and weigh in at 1.9kg's

Price is $1350 FIRM delivered .

ENDLESS CC-RG BRAKE PAD SET (Front & Rear)

This is brand new set of front and rear pads unused for GT-R33 & 34 and GT-R32 V-spec

I bought 2 sets of these in Japan last year.

One set are on my car and definitely dont need another set so these are sitting around gathering dust.

These are awesome pads for street and track.

Price is $520 for the Front & Rear set package delivered.

APEXI POWER FC , COMMANDER & APEXI BOOST CONTROLLER KIT FOR GT-R 33

Bought these on the possibility that I was going to have run Power FC on my car

Have sorted out tuning for my F-con for the time being so not needed anymore.

These have been checked by mechanic at HKS and all in workng order.

Used but in good condition.

$1050 Delivered

APEXI POWER INTAKE KIT FOR GT-R 33 & 34

These are brand new unused and in original box.

Bought these same reason as above and would need Power FC and air filters.

$310 Delivered

Pics...

MIDORI FRONT PIPE

JF0S7259.jpg

JF0S7260.jpg

JF0S7261.jpg

JF0S7262.jpg

JF0S7263.jpg

ENDLESS CC_RG'S

JF0S8029.jpg

JF0S8035.jpg

APEXI POWER FC , COMMANDER & BOOST CONTROLLER

JF0S8013.jpg

JF0S8014.jpg

JF0S8016.jpg

JF0S8018.jpg

JF0S8028.jpg

mamma31-img600x337-1303952793iby8nf53708.jpg

I'll get some pics of the Apexi Power Intake Kit soon but they look like this

apexipodgtr2.jpg

Yeah Deano they are awseome pipes and ridiculously light.

Photo's do not do the justice.

Sad to see em go but have custom titanium pipe going on..

:ph34r:

would these be noticeably louder than stainless? different note?

I've heard them on cars at Midori and bloody awesome.. very similar to the Mines front pipe.

soooo.. that would be a yes for louder or just diff note? :D i have the Midori stainless front pipes, and Midori titanium catback but i'm wondering if it will just put it into silly noise territory if full Titan.... hmmm...

Will sound porn ...

I'll be seeing them in a couple of weeks so will try record one of their cars but most of em have full system

APEXI POWER FC , COMMANDER & APEXI BOOST CONTROLLER KIT FOR GT-R 33

$1000 Delivered anywhere in Oz.

All pm's answered

MIDORI SEIBI TITANIUM FRONT DOWN PIPE 80mm (SOLD)

APEXI POWER FC , COMMANDER & APEXI BOOST CONTROLLER KIT FOR GT-R 33 (On HOLD)

MIDORI SEIBI TITANIUM FRONT DOWN PIPE 80mm (SOLD)

APEXI POWER FC , COMMANDER & APEXI BOOST CONTROLLER KIT FOR GT-R 33 (SOLD)

  • 2 weeks later...

ENDLESS CC-RG BRAKE PAD SET (Front & Rear) now $500 delivered anywhere in Oz

Absolutely awesome pad !!

Good price especially with current value of yen to the Aussie dollar.

Will cost you a good $60-$70 more now to buy off nengun etc.

These are in my opinion without doubt best Street/Track pad around.

Full set of front and rear pads !!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • @GTSBoy Ok so that was the shops problem...they showed R33 rotors on R34 page and i did not know 296 do not fit(and are for R33) Yes i bought "kit" with rotors and pads. Pads are ok(i have GTT calipers front and rear). They have some 324mm but no 310mm. So i dont know if they would fit. I have 17inch LMGT4s So another question. Can i fit those in the rear or they are just "too" big for that?
    • I started removing the tank a while back with the intent to give it a proper clean. Got to a bolt that I couldn't undo completely due to a diff being in the way, so just said f**k it and siphoned the gluggy old fuel out and called it a day. Looking it the tank it looks less corroded than the one in the pics for that billet hanger from Frenchy's anyway. Isn't it the fuel filters job to worry about this stuff? I scraped off most the crusty shit of the hanger but will give it another go before reinstall coz maybe the fuel and return pipes are also full of gunk  
    • Pretty sure it is a common fault. I believe this is the only part you need, but don't quote me as I don't have a V36.  I also believe it is a bit of a pain to change and the device needs to be encoded to the car once it is replaced, so may need someone with the right tools. Buy Genuine Nissan 48700JF00D (48700-JF00D) Lock Set-Steering. Prices, fast shipping, photos, weight - Amayama
    • Pads for R32 GTS-t, R32 GT-R non V-Spec (Sumitomo), R33 GTS-t and R34 GT-t are all interchangeable. R34 GT uses a 2x piston caliper, hence it didn't fit.
    • Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
×
×
  • Create New...