Jump to content
SAU Community

Recommended Posts

Yeah you can roll a bogged guard...gotta be very careful that's all, and be prepared to touch up. Paint can crack anyway without bog there. If guard roller is good it'll only crack in the part that gets rolled and then you can't really see it.

Mine needed rolling front and rear FYI

But I'm running 265's on the back and 235's on the front.

They were only just rubbing, rears rubbed when going over harsh bumps and fronts rubbed when turning

Car1.jpg

Car2.jpg

Camber.jpg

thats supposedly 2 degrees of rear camber (According to pedders) looks like more but

Edited by 89CAL
  • 2 months later...

sorry to bring this thread back up, how will 17x8+33 and 17x9+37 look guys? i just want something to sit good without needing spacers, i am also going to have camber arms on the rear and if anything ill get the front rolled

these are the specs they have in stock as im most likely going through this dealership, its giving me a headache trying to work out what to get :wacko: i just dont want something to sit inside my guards to much

The 17” D1R’s come in an 8, 9, 10 option.

17 x 8 is in an +33 offset.

17 x 9 comes in +37, +17 and -4.

17 x 10 comes in a +15.

The matt black in 17 x 9 +17 and 17 x 10 +15.

See my previous post for side pic. it needed the guards rolled but thats all, no camber arms.

2011090421454130.jpg

oh yeahh i see i might get 17x9+17 all round then. all would the same size all round look shit?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Possibly avoid using a Cometic one unless the deck/head surface are perfectly flat. I did have a look just then and forgiving gaskets such as Tomei or Nitto don't exist for the FJ20, however the Bar-Tek or Kameari ones look good and might do the trick.
    • Because pipe threads for pipe things. M threads for bolt things. Throw some teflon sealant onto it and dust your hands off knowing you did the right thing, instead of going twice around the block to achieve a result using the wrong things. Of course, all of these solutions are ignoring the fact that the minimum thread pitch we're talking about here is 1.25mm, with the 1/4" in NPT or BPS being out around 1.4mm. You will need to know that the boss you're tapping has enough thickness for at least a few threads. That's one of the reasons that 1/8" is commonly used - because the pitch is <1mm. And why would you look to use 1/4" NPT in a BSP country anyway? Ugh.
    • Just throwing around ideas, does it need to be in the compressor cover? Why not the hot side piping?
    • 1/8NPT drill size = 8.7mm. Since the hole got messed up by me, it’s probably around 9mm.    So 1/4” NPT would be next step. A drill size of around 11mm would be preferred there which is not way of my M12 (drill 10.5mm and tap M12 threads) 
    • 3 Kids are starting to hit that ages. I wanted to get them something special to learn on, put down the screens and have some fun. 4Door 2001 R34DE Black Pearl GV1 Jap Import, AU 2nd owner. Pre Work done. Suspension - Wheels Pedders SportsRyder Coilovers   Wheels TSG Spokey Boi 18'x9.5"+15 Body JASI Aero 4 door Type R Full Kit LED Conversion - Parker, Blinkers, & Reverse Exhaust Hurricane Headers 100 CPI high flow cat 2.5" Piping Cannon muffler Internal Bride low max stradia ii - front seats  Bride RO seat base and Rails (R/H) Cube short shifter LED Conversion - Interior   
×
×
  • Create New...