Jump to content
SAU Community

Recommended Posts

Hello,

I'm moving to JP early next year and I decided to immediately look for a 1989 GTR to purchase. I don't imagine that I'll find one in prime condition so I'm curious to see what I should look out for (i.e. rust, damage bearings, etc). I intended to track this car - road racing, and other grip racing.

Edited by Bigalow
Link to comment
https://www.sau.com.au/forums/topic/370915-buying-a-89-gtr/
Share on other sites

Check ks on instrument cluster then look at the condition off the interior if it says 100k but the interior is ripped and faded and looks like it done 300k well I would assume something Suss is happening check under car for dints in the floor and chassis etc inspect the paint thourghly makes sure it's all matching colors to make sure it hasn't been resprayed in certain spots to hide a crash ....

If u wanna be real anal take a fridge magnet or something and try sticking it to the doors and rear quarter panels and roof etc if it doesn't stick well then it's probably full of bog don't bother checking the bonnet or front guards or boot because I'm preety sure there all alloy and not magnetic anyways well I'm 100% that the bonnet is anyways also do a revs check and make sure there us no money owing or it has not been reported stolen or in accidents

Hope that helps

BOOZTJUNKEY

Link to comment
https://www.sau.com.au/forums/topic/370915-buying-a-89-gtr/#findComment-5913215
Share on other sites

Most important I would look out for is a stock oil pump still fitted (short oil drive on the crank), unless you have plans to take the engine apart to install new oil pump, crank collars, sump mods etc.

Link to comment
https://www.sau.com.au/forums/topic/370915-buying-a-89-gtr/#findComment-5914330
Share on other sites

Rust, compression, see how it runs, the usual things you look for in a car.

Right. This isn't my first R32 but I didn't have a GTR so I'm curious to see if common problems have been identified. I will probably take the vehicle to Nissan to have them do a multi-point inspection.

Check ks on instrument cluster then look at the condition off the interior if it says 100k but the interior is ripped and faded and looks like it done 300k well I would assume something Suss is happening check under car for dints in the floor and chassis etc inspect the paint thourghly makes sure it's all matching colors to make sure it hasn't been resprayed in certain spots to hide a crash ....

If u wanna be real anal take a fridge magnet or something and try sticking it to the doors and rear quarter panels and roof etc if it doesn't stick well then it's probably full of bog don't bother checking the bonnet or front guards or boot because I'm preety sure there all alloy and not magnetic anyways well I'm 100% that the bonnet is anyways also do a revs check and make sure there us no money owing or it has not been reported stolen or in accidents

Hope that helps

BOOZTJUNKEY

Good advice. I can't exactly pull up a "Car Fax" report so I hope it's not stolen or been accidents. What is "bog"?

Most important I would look out for is a stock oil pump still fitted (short oil drive on the crank), unless you have plans to take the engine apart to install new oil pump, crank collars, sump mods etc.

This will be my future gripe car (road race, etc) so a lot will be removed/replaced. The suspension will be changed, suspension parts, solid bushings, etc. Engine work will be completed when I return the car to the states... unless it's cheaper in JP.

Thanks for the heads up on the oil pump. That's exactly the type information I need.

Any other comments?

Link to comment
https://www.sau.com.au/forums/topic/370915-buying-a-89-gtr/#findComment-5914705
Share on other sites

Ive never owned a GTR but i was considering a cheap one a while back, a few reviews i read highlighted the 4wd system, apparently is very expensive to rebuild, i think its the torque splitter or somthing... cost big $$ to repair

some other problems could worn out synchro's and blown turbo's,

also check if its been in a crash and not repaired properly, and what if its been in a flood?? not sure how to check that one..

my 2c

Edited by SliverS2
Link to comment
https://www.sau.com.au/forums/topic/370915-buying-a-89-gtr/#findComment-5916360
Share on other sites

Why do you specifically want an 89? Late 93-94 would be the pick of the bunch with the long nose crank. Also if your turning it into a track car, save yourself time and money and buy something thats pretty much done. Then all you need to do is tidy up the edges.

GT-R ownership is a dark and miserable place. You're always broke, there is always something that you could fix and every new sound the car makes is a worry. But when it performs it makes up for all the bad things.

Link to comment
https://www.sau.com.au/forums/topic/370915-buying-a-89-gtr/#findComment-5916442
Share on other sites

Ive never owned a GTR but i was considering a cheap one a while back, a few reviews i read highlighted the 4wd system, apparently is very expensive to rebuild, i think its the torque splitter or somthing... cost big $ to repair

some other problems could worn out synchro's and blown turbo's,

also check if its been in a crash and not repaired properly, and what if its been in a flood?? not sure how to check that one..

my 2c

Thats what scares the shit outa me, brother. Nissan isn't own for having great first year cars. Due to this reason, I'm really particular about the conidition the driventrain system is in. I imagine I'll have to dump $5-6k on replacement pairs. My whole budget for this project car is $35k and I plan and doing a lot to make it track worthy.

Why do you specifically want an 89? Late 93-94 would be the pick of the bunch with the long nose crank. Also if your turning it into a track car, save yourself time and money and buy something thats pretty much done. Then all you need to do is tidy up the edges.

Good advice. Buying is always cheaper than building but, you can agree, it's always better to build than to buy. This allows the driver to know certain aspects of his/her vehicle.

I need a '89 because the US gov is strict on any grey market car younger than 25 years. I'll move back to the states around mid, late 2014 or 2015. That way US Customs can STFU

Link to comment
https://www.sau.com.au/forums/topic/370915-buying-a-89-gtr/#findComment-5916901
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Good luck on the weekend mate
    • Must have been an absolute nightmare to drive when the power steer was out, the rack ratio/wheel size/caster is all set up for power assistance
    • Welcome to SAU, what are you looking at buying?
    • I checked the injectors again (1 and 2, since they’re easiest to access) to make sure they weren’t clogged. Even though the entire fuel system had been cleaned, I wanted to be certain. Everything looked clean, so I reinstalled and connected everything. When I started the car to confirm everything was okay, it immediately revved up high, so I shut it off straight away. I checked to see if I’d missed a vacuum hose or something, but everything was connected. On the second attempt, the car ran without the high idle, but I noticed a distinct “compressed air” sound coming from the engine bay. Tracing the sound, I pushed injector #6 forward slightly and the noise stopped — it turned out it wasn’t seated properly, despite the fuel rail being bolted down. While holding it in place, the car idled steadily without stalling and ran for over 5 minutes. At this point, I pulled all six injectors out just in case I hadn’t seated them correctly or dirt had gotten onto the O-rings. Unfortunately, I discovered that I had damaged 3 out of 6 injectors (the OEM 270cc ones) during installation. So yes, this was my fault. Since only the pintle caps were damaged, I’ve ordered a Fuel Injector Service Kit from NZEFI to refurbish them. In the meantime, I reinstalled my new injectors – the car now idles fine for over 15 minutes without stalling. I have not attempted to drive it so far. It’s not perfect yet, as it hesitates when the throttle is pressed, but it’s a big improvement. Unplugging the IACV with the new injectors idles at around 800rpm, even with the IACV screw tightened fully. But this is probably due to tune.
    • I wanted to try and preserve the front bumper as long as possible, they're not cheap and are made to order in Japan. Taking inspiration from my previous K11 Micra build where I made an undertray for the Impul bumper, I did the same for this BN Sports bumper but a little slimmed down.  This time round I only made a 'skid plate' (if that's the correct wording/term) for just the bumper surface area, the Micra version covered the gap like an undertray. Starting off with a sheet of mild steel approx. 0.9mm thick 4ft x 2ft in size. I traced around the bumper, cut it out and cleaned the edges. Luckily I was able to get two halves from one piece of metal In the video I installed it as is, but I've since then I've removed it to spray and add a rubber edging trim. The rubber trim is suitable for 1-2mm and it's a really nice tight fit. The bolts had to be loosened due to the plates being too tight against the bumper, the trim wouldn't push on I used some stainless M6 flat headed bolts for a flusher finish (rather than hex heads poking down), I believe this style fastener is used for furniture too incase you struggle to source some. The corner's are a little wider, but this may be an advantage incase I get close to bumping it  The front grill got some attention, finally getting round to repairing it. Upon removal one fixing pulled itself out of the plastic frame, one side is M8 that fixes inside of the frame, where as the other side is M5. Not knowing I could get replacements, I cut down an M8 bolt, threaded it inside the frame along with a decent amount of JB Weld.  The mesh was replaced to match the bumper. One hole on the bonnet/hood had to be drilled out to 8mm to accommodate the new stud, once the glue had set it could be refitted. I think the reason the grill was double meshed was to hide the horn/bonnet latch (which makes sense) but I much prefer it matching the bumper Bumper refitted and it's looking much better IMO The Youtube video can be seen here: https://www.youtube.com/watch?v=bVZP35io9MA
×
×
  • Create New...