Jump to content
SAU Community

Recommended Posts

Well im having trouble moving my stock parts so thought id put these up.

First up a rare 3 point Tomei strut brace to suit R32 GTS-T/GTR, never seen another one for an R32. $200 + post

Rare greddy carbon fibre air diversion plate, suit R32 GT-R/GTS-T (with GTR bonnet), discontinued from greddy. $200 + post

Have an HKS metal intake pipe with pod to suit RB20/RB25 very rare (not pictured), let the ladies hear your dose bro. $200 + post

Cusco castor rods suit S13/180sx/A31/R32 GTS-T, good condition bit dirty thats all. $160 + post

Cusco tension rod bar, suit S13/180sx/R32 GTS-T/A31, good condition stiffen up that front end. $100 + post

R32 factory weathershields, ive sprayed them with the stuff you use to tint your tailights as they had scratches, $200 + post

any questions PM me

located Melbourne Southeast

cheers

Kyle

post-24032-0-60174700-1310964233_thumb.jpg

post-24032-0-75828700-1310964239_thumb.jpg

post-24032-0-94513800-1310964250_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/371327-r32-rare-parts/
Share on other sites

Hey sorry to hijack a bit.

Quick question about the Tomei strut brace. Did you ever have it mounted on a GTS-t?

I just managed to get my hands on one and wanna know if you have any pics of it mounted? (just where it goes onto the firewall).

Good luck with the sale, awesome parts.

Link to comment
https://www.sau.com.au/forums/topic/371327-r32-rare-parts/#findComment-5919646
Share on other sites

theres a plug on the firewall you take out and put a nut and bolt in, to get to the back you gotta take the plastic piece off under your windscreen where the water drains out off your windscreen not to sure what the part is called.

Link to comment
https://www.sau.com.au/forums/topic/371327-r32-rare-parts/#findComment-5919805
Share on other sites

  • 2 weeks later...
  • 2 months later...
  • 5 months later...
  • 3 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...