Jump to content
SAU Community

Recommend Me Some Tools!

S T A R 3 3

By S T A R 3 3,
in Fabrication

 Share

Recommended Posts

S T A R 3 3 Veteran

S T A R 3 3

Posted
Posted

hey guys

I've never been a 'hands on', self fabricating guy and usually resorted to buying and having it installed by my mechanic. Because of this, I've never owned my 'own' tools.

I've been looking to make a 'cooling plate' for my stagea and thought it would a simple straight forward project that I could do myself.

Could anyone suggest any tools that I could purchase to start me off that can help me on the smaller projects?

Thanks in advance

Link to comment
https://www.sau.com.au/forums/topic/371473-recommend-me-some-tools/
Share on other sites
turael Enthusiast

turael

Posted
Posted

Handheld Grinder, should come with cutting and grinding disks. Maybe get a flapdisk for it too

Gloves/gauntlets

Clear full face protector

Earmuffs

Cordless drill

Tape measure

Paint pen or equiv to mark with

Square

File, sandpaper

Clamps - Irwin clamps - the beefy ones on the left are sweet

Probably all you need to make a cooling plate aye?

turael Enthusiast

turael

Posted
Posted

You'll be wanting the standard set of tools if you haven't got em - decent spanners and sockets.

For jap work I like to have some stubby spanners (much shorter versions) on hand.

Also some ratcheting spanners are handy and speed things up.

Here's a few more ideas to get you started:

Hammer

Vice

Drill press

MIG Welder

Dropsaw

Extension cords - the ones on rolls are pretty handy

Work lights

LED lights with magnets to help you see

extendable magnet pole things to get bolts you drop

Trays to store bolts/nuts in etc

Drip trays & oil pans

Breaker bar

rattle gun

fyjosh Enthusiast

fyjosh

Posted
Posted

just pick up tools as you go. assuming you have all the standard auto related tools, i would get:

angle grinder, will change your life.

Mig welder, which will make you want a Tig welder...

drop saw.

a good vice.

weld stuff and learn about different materials. nobody welds stuff good for ages, if somebody tells you otherwise they're talking shit. my first welds were terrible lol.

when you start learning about welding, whole new oppertunities will open up for you in terms of making your own parts, braces, cages, everything. all i can say is go your research into what type of welder you want (basically only Mig or Tig) and how you should sue it and what to use it for.

speak to some members who are know to be big fab specialists, being an NS member i'd refer to str8e180 and other influential members for advice. it will help you in the long run and i know a lot of people in the trade will be more than willing to give advice.

good luck with it =]

RustyR32Gtst Mentor

RustyR32Gtst

Posted
Posted (edited)

A nice, low profile trolley jack.

Chassis stands.

Shelving for polishes, paints, oils ect.

Stereo/I pod dock.

900 watt Ashby and Abbott grinder on stand with a multitool on one end and a spindle with different polishing wheels on the other end (my favourite tool in the garage). :wub:

Rags.

Bar fridge. :yes::cheers:

And you'll probably need a solid work bench with a nice square, hard edge to fold your alloy sheet on on.

Edited by RustyR32Gtst
S T A R 3 3 Veteran

S T A R 3 3

Posted
  • Author
Posted

just pick up tools as you go. assuming you have all the standard auto related tools, i would get:

angle grinder, will change your life.

Mig welder, which will make you want a Tig welder...

drop saw.

a good vice.

weld stuff and learn about different materials. nobody welds stuff good for ages, if somebody tells you otherwise they're talking shit. my first welds were terrible lol.

when you start learning about welding, whole new oppertunities will open up for you in terms of making your own parts, braces, cages, everything. all i can say is go your research into what type of welder you want (basically only Mig or Tig) and how you should sue it and what to use it for.

speak to some members who are know to be big fab specialists, being an NS member i'd refer to str8e180 and other influential members for advice. it will help you in the long run and i know a lot of people in the trade will be more than willing to give advice.

good luck with it =]

thanks for this.. I do have the basic auto related tools, albeit supercheap spanner sets, screwdrivers, socket sets etc..

I went to bunnings *shudder* and picked myself up an angle grinder and a cordless hammer drill. All mid-range in terms of prices. Naturally, I felt like such a no0b walking around comparing and swapping tools repeatedly.

The bigger tools such as the drop saw - i would love. But, because Im renting, i have no where to put them..

Craved Grand Master

Craved

Posted
Posted

A nice, low profile trolley jack.

Chassis stands.

Shelving for polishes, paints, oils ect.

Stereo/I pod dock.

900 watt Ashby and Abbott grinder on stand with a multitool on one end and a spindle with different polishing wheels on the other end (my favourite tool in the garage). :wub:

Rags.

Bar fridge. :yes::cheers:

And you'll probably need a solid work bench with a nice square, hard edge to fold your alloy sheet on on.

$550 - bluepoint

$90 - 3 tonne

$100 - bunnings 150kg rated

??

$180 for grinder and $180 for the linishing attachment $20 for spindle + sisals and polish

$100? fridge

= $1350

thanks for this.. I do have the basic auto related tools, albeit supercheap spanner sets, screwdrivers, socket sets etc..

I went to bunnings *shudder* and picked myself up an angle grinder and a cordless hammer drill. All mid-range in terms of prices. Naturally, I felt like such a no0b walking around comparing and swapping tools repeatedly.

The bigger tools such as the drop saw - i would love. But, because Im renting, i have no where to put them..

hope it was a 5inch grinder, i will never use a 4inch by choice these days (not sure why lol) - makita 5" is about $99 @ bunnings.

drill bit sets!!! buy a nice ranged set - im using Bordo sets from 1mm to 13mm and was around the $125 for the kit from a tool shop, havent seen these in bunnings etc

Duncan Grand Master

Duncan

Posted
Posted

Just make shure you buy decent tools... Buy them once, look after them and you should have them for ever.

I don't really agree with that.

It's better to have the right, cheap tool to use, than the wrong, expensive tool because you can't afford the right one.

Other than the basic sockets and spanners, which are wroth buying good ones to save your knuckles if they break

Craved Grand Master

Craved

Posted
Posted

I don't really agree with that.

It's better to have the right, cheap tool to use, than the wrong, expensive tool because you can't afford the right one.

Other than the basic sockets and spanners, which are wroth buying good ones to save your knuckles if they break

i also agree lol

but there are limits

buy a good branded drill versus a low end brand. BUT use a cheaper pin punch/chisel set over an expensive one. for example.

better to buy good metal shears over the aviation snips for cut quality if he makes this radiator panel.

cheaper screw drivers work as good as expensive ones

list goes on, there is a time and place for cheap OR dear tools

Rowdy Collaborator

Rowdy

Posted
Posted

i also agree lol

but there are limits

buy a good branded drill versus a low end brand. BUT use a cheaper pin punch/chisel set over an expensive one. for example.

better to buy good metal shears over the aviation snips for cut quality if he makes this radiator panel.

cheaper screw drivers work as good as expensive ones

list goes on, there is a time and place for cheap OR dear tools

I dont agree with these points at all. cheap chisels go blunt and mushroom too fast, cheap pin punches snap for no reason, and cheap philips heads round off.

although fairly high range, my Wurth 1/4" socket set with assorted interchangeable screwdriver and torx bits is amazing. they prvide so much more positive grip and feel than any other screwdriver ive used. probably one of my favourite tools :rolleyes:

Having said that, once you have a bit of experience you will be able to tell a good tool from a crap one, irrespective of price/brand etc.

man, everyone loves tool threads dont they? :P

Craved Grand Master

Craved

Posted
Posted

for what he would use them for, those cheaper tools would work fine

snapping pin punches on 2mm steel/alloy is a bit crazy, doubt he'll head into high grade 10mm plate steel or stainless.

rounding screwdriver heads usually means you are using the wrong pitch and head size for the screw head, but by cheaper i didnt mean target screw driver kits lol

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • PranK
      Chris' Toyota Mark ii JZX110

      By PranK · Posted

      This looks great! Awesome to have the 5 speed with an LSD in this. The Recaro's look like SR2's or SR3's. It's a shame they've been retrimmed as they would have looked sweet in their original colours. I think I'd want my agent to be a little more up front and informative too. I've never imported but I reckon it would make me a little nervous, so the more info the better.
    • soviet_merlin
      Duncan's V37.......race car?

      By soviet_merlin · Posted

      Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
    • Murray_Calavera
      Jacks that fit under GTR lips that can reach the subframe?

      By Murray_Calavera · Posted

      My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Duncan
      Chris' Toyota Mark ii JZX110

      By Duncan · Posted

      Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
×
×
  • Create New...