Jump to content
SAU Community

Recommended Posts

So beautiful but have been totally put off these financially as they arent even a BCNR. Its just a GTS-4 ECR Chassis dressed up by Autech with GTR gear(AFAIK and have found to believe, Let me know if you know something iron?). And seeing as i dont like my cars to look stock i dont really want something i cant or shouldnt change around much when if i really wanted to have a 4 door GTR i could build one and build it my way with the only thing getting between the real deal and a project being the fact Autech name it a GTR and therefore it is a GTR. Not worth it. That and my ideas have matured beyond fantasies of a car that is very much a let down as this car is. Wouldnt mind a GTS-4 converted to GTR gear with custom widebody guards but that is not a project in mind at least right now.

The Autech GTR sedans run a BCNR33 (Kai) chassis code, not ENR33. They weren't like the Autech 260RS Stageas that ran the same chassis code as the regular wagons.

Saying that an Autech GTR sedan is a dressed up ENR33 sedan is no different to saying an BNR34 GTR is a dressed up ENR34 coupe - they're completely different cars. Autech did the work because Nissan couldn't justify modifying their production line to do the rear guards or the rear seats in GTR trim, I imagine all the rest would have been done at the factory - it's just a different combo of factory parts for Nissan.

Like I said earlier, if anyone wants one, I can make it happen. I've had a couple of workshops say they reckon they could get one complied using a combo of evidence from the R33 GTR coupe and the R33 sedan.

And whats your point? Do you have any idea how much these cars cost in Japan let alone the importing costs on top? Not hard to swap 33 GTR guards over on the front and fabricate rear guards that look better than stock.

No point whatsoever .... i was just trying to clarify the differences ... !

If it's not hard to swap the front, rear guards over, i'd RATHER do it to an R34 but does R34 come in Gts-4 form?

The Autech GTR sedans run a BCNR33 (Kai) chassis code, not ENR33. They weren't like the Autech 260RS Stageas that ran the same chassis code as the regular wagons.

Saying that an Autech GTR sedan is a dressed up ENR33 sedan is no different to saying an BNR34 GTR is a dressed up ENR34 coupe - they're completely different cars. Autech did the work because Nissan couldn't justify modifying their production line to do the rear guards or the rear seats in GTR trim, I imagine all the rest would have been done at the factory - it's just a different combo of factory parts for Nissan.

Like I said earlier, if anyone wants one, I can make it happen. I've had a couple of workshops say they reckon they could get one complied using a combo of evidence from the R33 GTR coupe and the R33 sedan.

So you know this as irrefutable fact? word to my mother? :P

Even if it is a proper BCNR, if i was to plan on having a 4 door GTR the way i want it, i would go with a GTS-4 from ground up.

Wonder how many are already in the country now.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...