Jump to content
SAU Community

Recommended Posts

get some lower rated speakers, ie. nothing flash or powerful because those better speakers....require more power to move. hence u need an amp.

something like 30watts RMS off the headunit i'd recommend.

i sold some $300 rear speakers for a set of $50 speakers cos i wasnt gonna amp them, only wanted to amp my fronts.

unfortunately, u wont get much bass from fronts sorry =/ 6x9's off the headunit will give u a bit of bass though.

Link to comment
https://www.sau.com.au/forums/topic/37307-help-please/#findComment-748531
Share on other sites

Nav2k is right, don’t get any thing to big coz u will wast your time, and u will end up clipping the speakers... if u want some thing good to run off a deck i found the lanzar neo speakers really good! and u can run them off an amp later.. i have a set in the back of my skyline and i run them off a 50x4 pioneer deck... find a good set of splits for the front and a good 2 way for the back and that should do nice, but i'm sorry to say u wont get lots of bass out of this set up, add a lil sub and ya will tho :P

for $200 u can get pioneers base splits (tc-c1602) and for $90 u can get the base 2 ways (ts-g1647) this is all really low end stuff but still good value for money (prices are RRP)

Link to comment
https://www.sau.com.au/forums/topic/37307-help-please/#findComment-749887
Share on other sites

$600 is a pretty small buget for full system but you should be able to pick up a set of splits, 6x9's and small amp for that if you shop around. take a week or two go to every shop ask all your mates them go back to the shop with the guy who gave you the time of day and courtesy to listem. you can save big money on gear right now as alot of brands are bringing in their new equipment, so you can get last seasons gear on special. you dont always need to buy the best brand names for a nice sound and theres money to be saved if you or a friend can do the install

Link to comment
https://www.sau.com.au/forums/topic/37307-help-please/#findComment-751096
Share on other sites

He does indeed :)http://www.soundoff.net.au/site/index.htm will give you an idea - he's a registered dealer for a number of brands but can get you just about anything you want. He did the alarm and stereo in my car - he gets ALL of my auto electrical work.

Tell him I (Marc) sent you and I'll kick his butt if he doesn't look after you :(

Link to comment
https://www.sau.com.au/forums/topic/37307-help-please/#findComment-753094
Share on other sites

mate, for $600 u could get something nice for a decent upgrade for a factory system.

i'd be thinking of a jaycar 4x100 amp for $350 new, a set of PG Octane R or Hertz splits for $200 new, and an alpine type S sub or something for $170 new.

wiring should cost u around $50, box for sub around $20 if u build it urself.

Look for some of these things 2nd hand if u cant stretch the budget, u should be able to find them easily, esp. the jaycar.

althernatively, u can go a smaller amp, the jaycar 4x50RMS, which will still sound very nice, theyre a bit cheaper.

Link to comment
https://www.sau.com.au/forums/topic/37307-help-please/#findComment-756978
Share on other sites

The ones you have in there aren't too bad :) I was listening to a CD on the way down here.

I got the Hertz splits in mine. They do sound a bit better than I think the kenwoods you have in there at the moment, but not massively noticeable to be honest. Think you'd probably want to go for something around the $500 mark to notice the difference, or go for the amp beforehand. So I reckon go for a good amp first, see when your speakers (and not the head unit amp) are maxing out -- then consider speakers.

Amp will allow you to get clearer sound at higher volumes, which you will notice.

Link to comment
https://www.sau.com.au/forums/topic/37307-help-please/#findComment-758687
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
    • Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
×
×
  • Create New...