Jump to content
SAU Community

Bad Result From My Dyno Read Out Please Help

tyler p

By tyler p,
in Engines & Forced Induction

 Share

Recommended Posts

The Mafia Grand Master

The Mafia

Posted
Posted

I was just about to say, TO4 means about 20 different turbos. Even diesel ones.

I cringe when people go in about to4 or even worse, some bullshit t3\t4 crap combo they have no idea about at all.

GTScotT Grand Master

GTScotT

Posted
Posted

I was just about to say, TO4 means about 20 different turbos. Even diesel ones.

I cringe when people go in about to4 or even worse, some bullshit t3\t4 crap combo they have no idea about at all.

Coz talk on yank forums make them look like gold.

tridentt150v Grand Master

tridentt150v

Posted
Posted

Why? TO4 can mean any of a shitload of turbos?

yep, that is why I'm asking, cos I'm not so sure what it is.....a hiflow can be anything and we are allsaying that its being choked and I tend to agree, but I'm not so sure that the turbo is any good period, not just the hot side but the whole lot.

I'm not disagreeing with you, I agree, and that is why I'm asking. Just cos he says it is a T04 and its been hiflowed doesn't mean jack.

tyler p Apprentice

tyler p

Posted
  • Author
Posted

hey guys sorry about the lack of knowledge of my turbo but here is my dyno sheet. we have fixed our problem its holding 18 pounds again we just need to get it re tuned. turns out the actuator diapraphm had a tear in it and was leacking boost. ill let you all know what happens with the next tune when i get back from this dam work trip....

i cant get hold of my specs on the turbo but i have the standard r33 rear housing that has been re machined and i believe its 6 mm bigger than standard size if that means anything to u all the wheel in side was changed but cant remember what size it actually is. its not just some random turbo as i have family that works at mtq and has actualy made the turbo for me sorry about the lack of knowledge tho. sorry to cause any arguments with this next post but yea cheers for all the help its much appreciatedpost-79355-0-75899900-1312949653_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • bilbo117
      R34 GTR Seats / No longer reclining

      By bilbo117 · Posted

      Hi all, Long time since I've posted here. Looking for some advice on what I can remove to further identify the cause of my issues.  I can move the passenger seat forward and back but the knob used to adjust the seat angle is pretty much free spinning, there's very little resistance.  Removing the side cover I can see that the chain is intact but the shaft for the adjustment spins without the gear attached to it moving.  What's my next step for disassembly here? Is this a common fault? Just being a little cautious as I didn't want to start removing bolts for a spring to fly out or something equally as stupid.  Cheers
    • Dose Pipe Sutututu
      Ethanol Content Sensor - Always at 11%?

      By Dose Pipe Sutututu · Posted

      Those above shitboxes, mediocre and above usually have a turbo strapped to them, hence the slightly higher octane is required.  
    • sinn3r
      R34 Skyline climate control unit transistor

      By sinn3r · Posted

      Hi all,   long time listener, first time caller   i was wondering if anyone can help me identify a transistor on the climate control unit board that decided to fry itself   I've circled it in the attached photo   any help would be appreciated
    • Kinkstaah
      Blue slip

      By Kinkstaah · Posted

      I mean, I got two VASS engineers to refuse to cert my own coilovers stating those very laws. Appendix B makes it pretty clear what it considers 'Variable Suspension' to be. In my lived experience they can't certify something that isn't actually in the list as something that requires certification. In the VASS engineering checklist they have to complete (LS3/NCOP11) and sign on there is nothing there. All the references inside NCOP11 state that if it's variable by the driver that height needs to maintain 100mm while the car is in motion. It states the car is lowered lowering blocks and other types of things are acceptable. Dialling out a shock is about as 'user adjustable' as changing any other suspension component lol. I wanted to have it signed off to dissuade HWP and RWC testers to state the suspension is legal to avoid having this discussion with them. The real problem is that Police and RWC/Pink/Blue slip people will say it needs engineering, and the engineers will state it doesn't need engineering. It is hugely irritating when aforementioned people get all "i know the rules mate feck off" when they don't, and the actual engineers are pleasant as all hell and do know the rules. Cars failing RWC for things that aren't listed in the RWC requirements is another thing here entirely!
    • GTSBoy
      Best place to order Authetic R32 Parts in Japan

      By GTSBoy · Posted

      I don't. I mean, mine's not a GTR, but it is a 32 with a lot of GTR stuff on it. But regardless, I typically buy from local suppliers. Getting stuff from Japan is seldom worth the pain. Buying from RHDJapan usually ends up in the final total of your basket being about double what you thought it would be, after all the bullshit fees and such are added on.
×
×
  • Create New...