Jump to content
SAU Community

Recommended Posts

Post a reply, don't do a quick reply. Look for the "Additional Options" box and click on the "manage attachments" button. Should be able to browse for the pic on your computer and then click ok. The pic will be attached to the post.

hope that helps, cheers.

Hey Munna,

I bought my R32 with the same setup, standard recirculating BOV and an atmo BOV (non-adjustable HKS Super BOV on mine) in the same place as yours. The reason people set it up this way is because they want to run an atmo BOV for some reason (high boost application or they just like the sound), but also want the car to retain idle quality and not to run mega rich between gear changes because the standard BOV will still work to a certain degree. (The cars ECU expects a certain amount of air to be recirculated by the std BOV at these points).

Didn't really hamper performance of the car, but it did hamper performance of the HKS BOV as it hardly even went off most of the time!

So it really seemed like a pointless setup, I ended up removing it for that reason.

Yeah I had the same thing - on 16psi the HKS would work alot harder.

As far as limits of the std BOV - from what I've heard it's pretty variable....I thought mine was leaking at 12psi but have since discovered it isn't. I've heard they hold up to 17psi standard, but can't confirm it, some say more, some say less...

There's a thread on SAU that describes a modification you can do to the BOV to make it hold a bit more boost at the cost of causing it open up a little slower:

http://www.skylinesaustralia.com/forums/sh...read.php?t=9634

.....Additionally, the Americans seem to love our std Skyline BOV as well - it's a Mitsubishi design and comes on a few models they have over there, a few things they've done to make them hold more boost:

Crush it in a vice!

http://www.geocities.com/MotorCity/Garage/...4/crushBOV.html

Physically drill out the small air leak inside the bov and vent it to the atmosphere for slow openning and holds boost up to 30psi, not bad!!

http://www.thedodgegarage.com/turbo_bov_mod.html

Hey CerealKiller,

Yeah, tightening it up so far that it can't open will definitely nullify it!! Of course if you have a pod filter the std bov is quite loud too.....

A friend and I tried this on his DR30 Skyline which has a adjustable Sheepdog BOV, we were able to prevent it from openning at all, such was the extent of the adjustment. Not necessarily good for the turbo (it has no std bov)....but so much quieter, b4 it sounded like a steam train venting every time it went off!

Personally on my car I just went to a jap wrecker and got a piece of intake piping without the mount/hole for an atmo BOV and then sold the BOV!

Yeah I had the same thing - on 16psi the HKS would work

RaseR

RaseR Blocked the little hole off on the standard blow off valve as in the the posts you listed and I could hardly beleive how much faster the turbo spolled up. Heaps more responive now and atmo blow off valve is louder.

Hey Munna, great result!

I had limited success with the BOV mod (I tried it after removing my atmo bov), seemed to hold boost a little better and opened up later - but I ended up reverting back because on my car it also caused infrequent part throttle surging. So many people have had totally different results from doing this mod.....it's interesting, I wouldn't mind trying the 'Dodge Garage' BOV mod as described in the third article I posted earlier, but haven't had the inclination as yet!!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
    • Apologies for the long read My R34 GTT was up for sale at the beginning of spring due to a few repairs creeping up. The strut tops needed replacing, roof and bonnet (hood) painting (yay for 3 stage pearl) and the underside stripped and treated. I sold the car which allowed me to be in a much better place financially. Leading up to the sale I was already thinking about the replacement. In an ideal world it needed to be a good all-rounder. Something I can mess around with, modify, do track days, do the school run, go on long drives etc.  Options included but not limited to... Laurel C35, Evo 8/9, Civic FD2, Impreza Hawkeye, Aristo and even an Audi S4 Avant (I've already got the Mazda 6 wagon). But there was always one car at the top of the list The Toyota Mark ii JZX110 I found an advert on a Facebook group for an example in Japan, from a seller called Jon at Rising Sun Exports. A few messages back and forth and Jon calls me from Yokohama one morning (or afternoon in his case). He briefly explained the import process, the costs involved and a repeat of the advert. After much deliberation, the price was agreed and the sale was locked in. I've never imported a vehicle so I jumped into the unknown head first. The money transfer was completed through wise.com (fees apply), very easy to use and the money was with him within a day or two.  The car suspension was raised for the vessel and the car dropped off at the port. It was 7 weeks later when the bill of lading was received and the freight invoice sent to me, followed by the export certificate a couple of days after (both digital copies) In the mean time the port had been in contact. I needed an agent to deal with the NOVA (notification of vehicle arrival) along with the tax/duty invoice, this was £75.00. The port also had a fee of £100, I'm guessing to cover the cost of the 10 day 'free storage' and for moving the car off the boat etc. They need a copy of the vehicle invoice, freight invoice and export certificate to allow the vehicle to pass through customs. The vessel arrived on Tuesday 5th August, the tax/duty invoice was generated and sent over. This is generally tax 20% and duty 10% of the vehicle value. Although the invoice came in at a higher amount than I had calculated. Once HMRC had received the payment the vehicle could be released from customs. I thought once the tax/duty was paid you could collect at any point, that's not the case. Your agent will need to book a collection slot, I requested Thursday 7th which was accepted, with a 9:00am slot allocated. It was a 5:00am start from Norfolk heading to Southampton. We eventually found the compound, upon presenting the bill of lading and some ID they released the car (they drove it out of the compound to the front ready for us to load up). The email from the port stated each slot had a 10 minute window, which seemed abit farfetched but the staff said it's not a strict rule. We were there for approx. 30-40 mins in total. A week prior to collecting I contacted my garage and explained the situation, I was able to get an inspection slot that afternoon. For the registration, DVLA require the car to be insured, for this I used a company called Adrian Flux who can insure the vehicle using the VIN number. 
    • Hey guys, looking for these side skirts if anyone can help me out. 
    • Wife and I are still looking for a new home. One condition was a large enough garage for a full-size lift in one bay. Now if only we could find something... We've been looking for almost a year now.
    • Thanks everyone for the ideas! Sadly, ramps are a no go for me. With young kids at home, I do most of my work late at night while they're sleeping. Starting the car multiple times wouldn't be a great idea.  I'll go see one of those new long reach low profile jacks and take a couple measurements to see if they will fit.   
×
×
  • Create New...