Jump to content
SAU Community

Partially Parting Out R34 Gtt

Risking
 Share

Recommended Posts

Risking Grand Master

Risking

Posted
Posted

Ive bought an R34 and dont nessiarilly need everything in it.

So ill list what I am selling.

RB25 Neo engine, I beleive its and NA engine with a DET turbo assembly bolted onto it. Runs perfectly drives fine oddometer reads 37,000kms. legit mileage or not I dont know and dont care, thats what it says though.....

Comes with an auto that has evidently got a 3000rpm stally and some shift kit but I dont know anything about it.

With loom, ecu blah blah I want $1000

Pretty much everything from the engine bay minus the steering rack, colum and a few small brackets etc can be sold. Ask and ill decide if its for sale or not.

R34 xenon headlights, passengers side has been repaired but its done pretty well and looks fine. Inspections welcome they work fine but could do with that plastice cleaner crap to make them like new

Asking $500 for the pair.

R34 interior parts. im keeping the dash, console, gloovebox, door trims,dash trimming pretty much everything else is for sale, again ask and if its for sale ill sell it

Boot trim is all perfect and for sale $80 for the entire boot trim

Seats are mint condition $300

Mint condition Koni shocks, have to check what springs but they are very good condition.

asking $700 the full set exchange for your old stock ones so my car can still roll

Exhaust system, looks to be a factory system with an X force rear muffler

Asking $100

located in sydney, engine can be seen running for the next week or till I could be bothered pulling it all apart.

more parts to come as i decide what I want to keep

Link to comment
https://www.sau.com.au/forums/topic/373422-partially-parting-out-r34-gtt/
Share on other sites
Risking Grand Master

Risking

Posted
  • Author
Posted

Sorry mate the handbrake cables are not for sale untill I strip the car in a week or so. Unfortunately I need the handbrake working as my car park is a hill.

The car is silver

Risking Grand Master

Risking

Posted
  • Author
Posted

Headlights sold to webber pending payment and pickup within a couple of days.

For those asking I'm not holding anything. First one to say they want it and show up the day after with cash gets it.

Risking Grand Master

Risking

Posted
  • Author
Posted

Also now up for sale

Front mount intercooler kit. Included pipes cooler and clamps etc

Drivers end tank has had an alloy plate welded over it to fix what looks like some old damage. Doesn't leak seems to be in fine working order

Asking $150 the whole kit

Blitz SBC. Basic looking model in good condition, drove the car today seems to hold boost and work fine

Asking $200

Risking Grand Master

Risking

Posted
  • Author
Posted

Thee has been heaps of interest in the auto which is odd but meh.

I'm having an auto specialist look inside it tommorrow and drop the pan off to see what's been done briefly inside.

From his short drive of the car his suggested it has some type of modified valve body and shift solenoids as well as the obvious stall convertor.

In his experience the box would be worth a few grand to build so I'm going to ask $500 for it with everything.

If someone really wants it you are welcome to drive the car for the next week before it gets pulled down

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      What accelerator cable can be used with greddy plenum

      By Duncan · Posted

      I was 99% sure the standard one is long enough to get there, you might just have to change the throttle orientation. If not, I remember someone having used an r31 cable instead, but that is probably harder to find than r33 by now...
    • V36
      What accelerator cable can be used with greddy plenum

      By V36 · Posted

      HELP   Hey all, Is there an accelerator cable from another Nissan that can be used on the R33 GTST RB25DET with a Greddy forward facing plenum?  Thanks in advance  Rob 
    • ARB26
      RB26DETT Sketchy boost mod?

      By ARB26 · Posted

      Or do we think it was installed to give 1 bar of boost max, all day, everyday?
    • ARB26
      RB26DETT Sketchy boost mod?

      By ARB26 · Posted

      So could it be assumed it has been installed intentionally with potentially a power FC boost controller kit? 
    • Gareth87
      What should I do next to hold the head on

      By Gareth87 · Posted

      Had my rig on Matt's dyno at PITS the other day. After a few years between tunes I added a few sensors and swapped intercoolers. Result. 553hp at 26psi. Not bad for an FJ20 that was built in 2007. The problem.. It filled the overflow bottle on hard runs which leads me to believe the head gasket isn't sealing. I have a coolant pressure sensor which was reading cap pressure at 22psi and occasionally overrunning to 23/24 psi on deceleration after a pull. It was not spiking. It has arp2000 head studs and a cometic gasket. As its been 18 years in service, I pulled the engine out and head off. Everything looks good but we obviously have an issue. Where I'm at.. Years ago I had the same issue, I checked the stud tension and they were all over the place. Some at 60 to 70 and some up near 90. I nipped them all to 100ft lbs and this stopped the water push until now. I believe this compromised the gasket back then. What do I do? 2 options are..  1) I bought arp 625+s, which I could put in with a new gasket. Thinking Kameari this time, reassemble and try again. 2) strip the block, get fire rings machined in with copper gasket and try that. I do not want to push it more than 28 to 30psi. I think the turbo will be out by then anyway. (G30-770). My other concern is the long term ability of a copper head gasket. Are they streetable for years? I feel like a new gasket with the new studs will probably suffice, but I don't know. Any thoughts welcome and advice on copper gaskets and fire rings. Thanks!
×
×
  • Create New...