Jump to content
SAU Community

Recommended Posts

ok i asked the guys to do all they can while the panels are off to prevent future rust. Now the guy told me about snake oil to spray inside the car frame, columns rails etc, through any little hole openings they can find i mean thats the only way to get inside there . Now guys or people with experince, do you think this is the best product for this ? or should i reccomend another product to the guys at the work shop?

I've never heard of snake oil so I cant speak for or against it. At work we use stuff called LPS3. In my experience it works really well. You can get it in aerosol cans or in a tin to put in spray bottles. The only problem is that i worknin aviation and it is approved to be used on aircraft which automatically makes it expensive. But it does work well. Here is the website anyway if pure keen http://www.lpslabs.com/product_pg/corrosion_pg/LPS3.html

ive used deodorised fish oil to rust proof car doors etc . . . .removed door trim and cleaned out gunk at the bottom of the door with a high pressure cleaner, allow to dry, block door drains with blue tack and sprayed the inside of the door from top to bottom keeping away from the locking mechanism and window regulators, when its dry reassemble and unplug drains and your done

Have you considered electronic rust prevention ?

When i typed snake oil that came up but i dont understand it, and is it even for cars? What did you understand from this electronic rust prevention.

For now im just going to go nuts with a fish oil spray can in every hole and cranny i can see ? What do you think?

Have you considered electronic rust prevention ?

You are thinking of the module fitted to a car that pulls the voltage current out of the coolant in the block so it cant rust as easily.

I sell a lot of stuff for all types of rust prevention at my dealership. There is upper body and under body, it comes in a tin can that is 1 liter.

You are thinking of the module fitted to a car that pulls the voltage current out of the coolant in the block so it cant rust as easily.

module fitted to a car = yes ,, pulling voltage current out of the coolant = no.gif never heard of that before.

How ERP works <-- CLICK THAT

I had one fitted to my daily a few years ago, cost $200 ish from memory. got it from tint a car

tintacar link

its pretty small, i have a little unit about the size of a business card under my bonnet, and thats all you see.

I can take some pics if you like.

module fitted to a car = yes ,, pulling voltage current out of the coolant = no.gif never heard of that before.

How ERP works <-- CLICK THAT

I had one fitted to my daily a few years ago, cost $200 ish from memory. got it from tint a car

tintacar link

its pretty small, i have a little unit about the size of a business card under my bonnet, and thats all you see.

I can take some pics if you like.

Are you saying this protects the whole body of the car? Does it break down rust aswell?

Are you saying this protects the whole body of the car?

Im not saying that,,, the people who make and sell it are though, yeah definitely.

Does it break down rust aswell?

This is taken from the FAQ page of the how ERP works link above.

Q. Is it worth fitting an ERPS system if my vehicle already has rust?

A: Yes the principal of operation works the same for both old and new vehicles. It works to slow the rate at which the steel reacts with environmental elements which cause rust. Hence, whether your vehicle is new or already has some rust, the ERPS system will work to slow the rust reaction and extend the life of the vehicle. With older vehicles it is recommended that the ERPS system be installed some four to six weeks before any rust repairs are undertaken. This allows the system to react with or neutralise any rust currently in the vehicle.

Do a bit of googleing and you will find opinions for and against, some people will say its a load of crap ,, others will swear by it. I figured, its only a couple o hundred bucks spent trying to protect a $25000 car, its worth a shot.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The part where you claim the car "is done" means you won't...
    • Johnny is sad now... Because you didn't get Bosch Motorsport ABS.  
    • Hey keep the ideas coming, I'm always keen on projects! But, problem fixed!  I got a cheapie ozito scope from Bunnings and had a good look in and around the bearing and sensor hole. I couldn't see a smoking gun but the bearing looked a bit strange, especially when comparing with a new one. I thought the cover had come off the bearing magnets.  Sorry for pics of a screen, I didn't have an SD card.     Good thing I had the old one to inspect. So, given I'm like a pit crew with wheel bearings and luckily I had a spare bearing because I f**ked up my parts order, I decided to just smash it out. Got the old one out in about an hour. So much easier when the parts haven't had a chance to rust together yet. 😂 And, well, found the problem.    In the second pic at about the 8 o'clock position, you'll see what I think is the tip of the old sensor.  The new sensor has definitely been rubbing but it's all intact, just a little shiny so I'm hoping it's fine.  The car brakes perfectly now and no errors.  I think the job took about 2.5h in the end. 👍🏻 I really appreciate the help in here as usual. Thanks guys.
    • I was only looking because I saw some drops on the ground but it wasn't alot. Recently had it serviced will ask the mech to confirm. Find it strange that it looks standard though, can see in another photo of a random box 
×
×
  • Create New...