Jump to content
SAU Community

Recommended Posts

ok i asked the guys to do all they can while the panels are off to prevent future rust. Now the guy told me about snake oil to spray inside the car frame, columns rails etc, through any little hole openings they can find i mean thats the only way to get inside there . Now guys or people with experince, do you think this is the best product for this ? or should i reccomend another product to the guys at the work shop?

I've never heard of snake oil so I cant speak for or against it. At work we use stuff called LPS3. In my experience it works really well. You can get it in aerosol cans or in a tin to put in spray bottles. The only problem is that i worknin aviation and it is approved to be used on aircraft which automatically makes it expensive. But it does work well. Here is the website anyway if pure keen http://www.lpslabs.com/product_pg/corrosion_pg/LPS3.html

ive used deodorised fish oil to rust proof car doors etc . . . .removed door trim and cleaned out gunk at the bottom of the door with a high pressure cleaner, allow to dry, block door drains with blue tack and sprayed the inside of the door from top to bottom keeping away from the locking mechanism and window regulators, when its dry reassemble and unplug drains and your done

Have you considered electronic rust prevention ?

When i typed snake oil that came up but i dont understand it, and is it even for cars? What did you understand from this electronic rust prevention.

For now im just going to go nuts with a fish oil spray can in every hole and cranny i can see ? What do you think?

Have you considered electronic rust prevention ?

You are thinking of the module fitted to a car that pulls the voltage current out of the coolant in the block so it cant rust as easily.

I sell a lot of stuff for all types of rust prevention at my dealership. There is upper body and under body, it comes in a tin can that is 1 liter.

You are thinking of the module fitted to a car that pulls the voltage current out of the coolant in the block so it cant rust as easily.

module fitted to a car = yes ,, pulling voltage current out of the coolant = no.gif never heard of that before.

How ERP works <-- CLICK THAT

I had one fitted to my daily a few years ago, cost $200 ish from memory. got it from tint a car

tintacar link

its pretty small, i have a little unit about the size of a business card under my bonnet, and thats all you see.

I can take some pics if you like.

module fitted to a car = yes ,, pulling voltage current out of the coolant = no.gif never heard of that before.

How ERP works <-- CLICK THAT

I had one fitted to my daily a few years ago, cost $200 ish from memory. got it from tint a car

tintacar link

its pretty small, i have a little unit about the size of a business card under my bonnet, and thats all you see.

I can take some pics if you like.

Are you saying this protects the whole body of the car? Does it break down rust aswell?

Are you saying this protects the whole body of the car?

Im not saying that,,, the people who make and sell it are though, yeah definitely.

Does it break down rust aswell?

This is taken from the FAQ page of the how ERP works link above.

Q. Is it worth fitting an ERPS system if my vehicle already has rust?

A: Yes the principal of operation works the same for both old and new vehicles. It works to slow the rate at which the steel reacts with environmental elements which cause rust. Hence, whether your vehicle is new or already has some rust, the ERPS system will work to slow the rust reaction and extend the life of the vehicle. With older vehicles it is recommended that the ERPS system be installed some four to six weeks before any rust repairs are undertaken. This allows the system to react with or neutralise any rust currently in the vehicle.

Do a bit of googleing and you will find opinions for and against, some people will say its a load of crap ,, others will swear by it. I figured, its only a couple o hundred bucks spent trying to protect a $25000 car, its worth a shot.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Sounds like you've got an interesting adventure ahead here with local support if you have trouble! My guess is that, unboosted, you will be OK with a small upgrade like -9. What will happen is that once the stock ECU sees more airflow than it expects it will add a heap of fuel and pull a heap of timing to be safe because it can't understand how it could get that much air without there being an issue. You will see clouds of black smoke and it won't pull hard through the midrange and top end. So, overall it will be a bit frustrating but should be OK. If you are still nervous set the base timing back 2o through the CAS, but it will be even more sluggish everywhere. As said above through...this is not my guarantee your engine won't be blown into a million pieces, leaving you looking for very hard to find parts A better idea is get a computer with logging ASAP, wire in a wide band O2 sensor and a use remote tuner. I've done multiple cars this way and while it is not as good as a specific tune on a dyno they can get it 90% right. I'd suggest if you can afford an R33 GTR these days you can afford an ECU and tune. And if you can't afford that you sure won't be able to afford the rebuild if it goes bad in the meantime,.  
    • Yeah it would be nice if someone took the time to put that sort of information together, but there are a lot of variations in looms. I think you are making this way hard for yourself if you just want to get it running....sourcing an SR20 with the right wiring will be a billion times easier than matching the RB loom to an S15 chassis. If you do end up going this way, you just need to trace every wire in the loom with a multimeter, 95% of them will go to a location you can confirm at the ECU.....and then post it up for the next person who needs it  
    • Just top it up with water, and keep a general idea of how much you added. It is normal for water to be pushed into and pulled out of the reservoir through the cap, and it should not be more than half full or it will be likely to overflow when hot. Any decent mechanic can do a pressure test of the cooling system to confirm if you have a leak. Keep in mind if it is only leaking a little and when hot it may well evaporate before you see it hit the ground
    • I'd ask the shop what they used and use that. Mixing coolants is sometimes OK, sometimes not, and you have know the details of each coolant to know whether it's a good idea or not.
    • Is it alright to top up with just another green coolant?
×
×
  • Create New...