Jump to content
SAU Community

Recommended Posts

Formatted my 1TB external as FAT32 through DOS, but after hours of it formatting, I woke up to the message 'the volume is too big for FAT32'

Anyone done it? What did you use?

I'm looking for a full version of swissknife as apparently that's what I need...

Link to comment
https://www.sau.com.au/forums/topic/373853-formatting-external-hdd-for-ps3/
Share on other sites

I dont really download high def stuff so most movies are 700mb for me, and the rest of my files are tv shows. Don't have the Internet/a network at my new place yet either but might do that when I do. I was using vuze I think it's called at my old place to stream.

Wish the sorting system was better on the PS3's. I've got all my top gear on there. Wish you could make folders to put stuff in but oh well

You can...All my stuff is in folders exactly as it was on my hard drive when it was NTFS

You just have to make these 3 folders

'MUSIC', 'PICTURE' & 'VIDEO'

They need to be in capital letters. From there, put all of your video files in the Video folder (they can be in their respective sub folders, which don't need to be in capital letters...music in music...you get the idea

So basically

VIDEO

-Curb Your Enthusiasm

----Season 1

-Seinfeld

----Season 1

They'll then be sorted in alphabetical order when you browse them on the PS3, and episodes will be in order if all of your files are named properly

This is transferring from an external HDD onto the PS3, making a folder on the ext drive 'VIDEO' then selecting it in your PS3 and copying it across?

Think thats what you meant lol..... Will have to do that anyway, will be lots better :)

This is transferring from an external HDD onto the PS3, making a folder on the ext drive 'VIDEO' then selecting it in your PS3 and copying it across?

Think thats what you meant lol..... Will have to do that anyway, will be lots better :)

Nah my external HDD is hooked up to the PS3, and all the data is on there, not on the PS3 itself.

Not sure if you can add folders to the PS3 HDD, but I'd assume it's possible if you pull it out and hook it up to a computer to do it...

You can't make sub folders on the ps3 and you also can't pull it out and hook it up to the PC and create folders either unfortunately. The easiest way is to just buy an external hdd or have a network setup to stream instead of having them copied on the ps3.

Edited by Dani Boi

You can't make sub folders on the ps3 and you also can't pull it out and hook it up to the PC and create folders either unfortunately. The easiest way is to just buy an external hdd or have a network setup to stream instead of having them copied on the ps3.

Yeah that's all I've been doing. Have all my topgear on the PS3 itself but there in order so no biggy

As for the folders on ext HDD. I don't worry about it, just hit triangle and display all and it comes up with all the folders that are on there anyway

ps3 i found is also a bit picky with regards to what video formats it'll read and what it wont if your playing direct from external (e.g it wont play .mkv files). my guess is sony being a major player in the home entertainment publishing/producing sector they dont wana make it easy for people to play pirated gear.

ive tried a few media servers and i've found ps3mediaserver by far the best one, less of a cpu hog on the computer and generally easier to use from the ps3 end. transcoding is awesome, any format the ps3 wont read, ps3mediaserver will transcode it on the fly in to a format that works. with tversity and Vuze i had troubles with transcoding they were quite unreliable. ps3mediaserver by far the best solution for watching stuff on ps3 IMO.

ps3mediaserver

All sorted...After wasting 10+ hours formatting it only for it to fail at the end, I found and downloaded a program that formats it in 5 seconds :thumbsup:

So just out of curiosity what program did you end up using anyway? :P

I just bought a western digital mybook white light edition. Works faultlessly with the PS3. I didnt have to do any thing other than plug it in as per the instruction booklet. Being a total computer retard this was a very nice feature for me! Seems to encounter less streaming issues than streaming from the Laptop used to as well

So just out of curiosity what program did you end up using anyway? :P

Lol sorry, thought I mentioned it..

it was called fat32format (ironic..) Can't remember where I got it from, but its only a 23kb zip file...

  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • I wouldn't worry about dissimilar metal corrosion, should you just buy/make a steel replacement. There will be thread tape and sealant compound between the metals. The few little spots where they touch each other will be deep inside the joint, unable to get wet. And the alloy block is much much larger than a small steel fitting, so there is plenty of "sacrificial" capacity there. Any bush you put in there will be dissimilar anyway. Either steel or brass. Maybe stainless. All of them are different to the other parts in the chain. But what I said above still applies.
    • You are all good then, I didn't realise the port was in a part you can (have!) remove. Just pull the broken part out, clean it and the threads should be fine. Yes, the whole point about remote mounting is it takes almost all of the vibration out via the flexible hose. You just need a convenient chassis point and a cable tie or 3.
    • ..this is the current state of that port. I appreciate the info help (and the link to the Earls thing @Duncan). Though going by that it seems like 1/4 then BSP'ing it and using a bush may work. I don't know where I'd be remote mounting the pressure sender... to... exactly. I assume the idea here is that any vibration is taken up by the semiflexible/flexible hose itself instead of it leveraging against the block directly. I want to believe a stronger, steel bush/adapter would work, but I don't know if that is engineeringly sound or just wishful thinking given the stupendous implications of a leak/failure in this spot. What are the real world risks of dissimilar metals here? It's a 6061 Aluminum block, and I'm talking brass or steel or SS adapters/things.
    • And if you have to drill the oil block, then just drill it for 1/4" and tap it BSP and get a 1/8 to 1/4 BSP bush. The Nissan sender will go straight in and the bush will suit the newly tapped hole. And it will be real strong, to boot.
    • No it doesn't. It just needs an ezy-out to pull that broken bit of alloy out of the hole and presto chango - it will be back to being a 1/8" hole tapped NPT. as per @MBS206 recco. That would be for making what you had in alloy, in steel. If you wanted to do just that instead of remote mounting like @Duncan and I have been pushing. A steel fitting would be unbreakable (compared to that tragically skinny little alloy adapter). But remote mounting would almost certainly be 10x better. Small engineering shops abound all over the place. A lathe and 10 minutes of time = 2x six packs.
×
×
  • Create New...