Jump to content
SAU Community

Recommended Posts

hey hey peeps

i have pulled out the dash out of my 180sx, and it has the usual cracks and stuff. i have been thinking of laying some fiberglass over it and while i am at it have my gauges molded in

just wondering what the go with this, i have notice that there is a layer of foam under the vinyl so i was thinking of just cracking off all the vinyl and just soaking some resin and a layer of mat on top of the foam

also been thinking of getting it carbon fiber if possible

im not trying to get a show effect here just neat as this is my drift car

thanks all

Link to comment
https://www.sau.com.au/forums/topic/373936-fiberglassing-dash/
Share on other sites

Check out this site: Fibreglass Forums

You have to sign up to get into the forums and see the pics but it's well worth it. Plenty of good inforamtion in there. I did a lot of reading before I tackeled my Carbon over Fibreglass front lip project.

test it out, alot of foams cannot handle the glassing process, you may need to strip the foam and outer vinyl then lay it over the plastic/board that's below.

^^^yep, i reckon the fibreglass resin will disolve the underlying foam big time

Check out this site: Fibreglass Forums

You have to sign up to get into the forums and see the pics but it's well worth it. Plenty of good inforamtion in there. I did a lot of reading before I tackeled my Carbon over Fibreglass front lip project.

I second this, look up anything done by Nexson. He is very good at making this look OE and perfect (ie lot's of filler and sanding :)). Might need to joining the forum to search but well worth it. I do recall going through a massive thread regarding a dash 'upgrade'.. quite ridiculous but still a great display of skills to do what he did.

  • 3 weeks later...

Fiberglassing is pretty easy, I'm self taught through forums, videos, trial and error, have made dashes, trims, HEAPS of repairs and even custom body kit parts.

The foam is best to be taken off, can be frustrating to tear off at times but if you slap glass and bog over top you'll have a lot of fitment issues.

The actual shape of the dash under the foam can differ a lot from what you see on top but you can fix all that and shape it how you like with MDF and cloth =)

This is a dash I'm currently making for a mate, nearly ready for primer, filler and final sand before paint =) It is different but yea =P

Also pays to FIX the fiberglass to the actual dash to prevent cracks or movement, for example, rough up the plastic with the roughest sandpaper you can get or drill a few small holes here and there to make an anchoring point and glass a little underneath, or even rivets or flat headed screws.

305396_10150278683147891_658797890_7843016_4435497_n.jpg

293266_10150278683197891_658797890_7843018_7742584_n.jpg

Carbon overlay on fibreglass isn't too difficult but you have to use the right epoxy resin and make sure that the curves are subtle. Complex curves require a vacuum pump. Check out the carbon thread on the fibreglassforums.com. You can also check out my carbon lip build thread.

I'm self taught too thanks to some work my dad taught me and those forums.

  • 2 weeks later...

im thinking of making it light weight now, any ideas on how to use the dash as the mould? was thinking al foil and some type of mold release to make a fiberglass mold, then the mold release on the inside of the mould then glassing the inside.

if you understand what i mean

I was going to do that as well.Just by taking the wrap and foam off exposing the bare plastic of the dash board. Then you can add a layer of carbon fiber. But then I thought about shinny paints don't do well. It could have a massive effect on your vision while driving.

So all I did was made this huge pod until I have the time for visuals.

Edited by koe
  • 3 weeks later...

a friend gave me the idea of using some sort of fencing/chicken wire and pressing it onto the dash the make the shape of the dash, then using al foil inside the wire then glassing.

im not going to be using any of the air vents so i dont have to worry about the complex shape for them

good idea?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
    • I know I have to get a wheel alignment but until then I just need to bring the rear tyres in a bit they're wearing to the belt on the inside and brand new on the outside edge. I did shorten the arms a bit but got it wrong now after a few klms the Slip and VDC lights come on. I'd just like to get it to a point where I can drive for another week or two before getting an alignment. I've had to pay a lot of other stuff recently so doing it myself is my only option 
    • You just need a wheel alignment after, so just set them to the same as current and drive to the shop. As there are 2 upper links it may also be worth adding adjustable upper front links at the same time; these reduce bump steer when you move the camber (note that setting those correctly takes a lot longer as you have to recheck the camber at each length of the toe arm, through a range of movement, so you could just ignore that unless the handling becomes unpredictable)
    • I got adjustable after market rear camber arm to replace the stock one's because got sick of having to buy new rear tyres every few months. Can anyone please let me know what the best adjustment length would be. I don't have the old ones anymore to get measurements. I'm guessing the stock measurement minus a few mm would do it. Please any help on replacing them would be fantastic I've watched the YouTube clips but no-one talks about how long to set the camber arm to.
    • Heh. I copied the link to the video direct, instead of the thread I mentioned. But the video is the main value content anyway. Otherwise, yes, in Europe, surely you'd be expected to buy local. Being whichever flavour of Michelin, Continental or Pirelli suits your usage model.
×
×
  • Create New...