Jump to content
SAU Community

Recommended Posts

Hi just bought my first skyline it's a n/a r33 I have noticed a couple of small faults but one thing that seems to be odd and bugging me is when I go to warm the car up and I turn the steering wheel the revs seem to jump abit not by much maybe 200-300 rpms not sure what seems to be the problem doesn't affect the driving really but just curious to know what seems to be the cause . I'm also curious about the 2 lights I have on my dash one says "SLIP" and the other "4WD" I have seen other r33s with this but not sure what they mean or when the light actually comes on . Anyone know anything about these things and could let me know ? Thanks :)

The revs jump when you turn the wheel because the power steering runs off the engine and the engine revs itself the stop it stalling. Same goes for air-con.

I'm guessing "SLIP" means loss of traction? "4WD" means 4 Wheel Drive. You must have a GTS4.

Edited by H4x

slip light means the rear wheels are loosing/lost traction, and when it stays on it means the front wheels are pulling the car. 4wd light means there is something wrong with the 4wd system, from my understanding

I believe your right about the 4wd light cause I removed the 4wd relay from the boot and the light turned on and stayed on . So does that mean the gts4 are only 4wd when the rear wheels lose traction ? Do you also know anything about it being 4 wheel steering ?

Cheers

if no hicas then no 4 wheel steering

Yes I do see hicas in the relay box , so from what you read is it safe to say I have a GTS4 ?

Just for future reference what is it that makes a gts4 ? Is it the 4wd ? Or the 4ws ? Or both ? =/

And my final question is does anyone Have any information about the LSD, it's an import too if that helps ? Cause there is a relay saying 4wd LSD is it safe to take this out and drive ? Will it even make it rwd ?

The revving up whilst turning is normal, as explained above. But the thing is, to hear it or for the engine to do that whilst turning, you must be stationary. You should never turn the wheel of a car while it isn't moving, if you're an OK driver, there's no need to. It puts undue stress on the steering components, specifically the PS pump.

Yes I do see hicas in the relay box , so from what you read is it safe to say I have a GTS4 ?

Just for future reference what is it that makes a gts4 ? Is it the 4wd ? Or the 4ws ? Or both ? =/

And my final question is does anyone Have any information about the LSD, it's an import too if that helps ? Cause there is a relay saying 4wd LSD is it safe to take this out and drive ? Will it even make it rwd ?

from what i can remember most came fitted with hicas (there should be a light on your dash, a big metallic unit sitting in front of the rear diff)

as far i as i can remember the gts4 was awd (based on the whole gtr attessa system) 4 wheel steering (hicas / super hicas in some cars) is just a factory option although most came fitted anyway.

& the lsd transfers power to the wheel(s) that aren't gripping when there is a loss of traction... in retrospect - drifters lock their diff so its the same amount of power to both wheels irrespective of traction - thus makes it easier to keep the rears spinning when drifting / linking corners..

GTS4 comes with ATTESSA AWD out of the GT-R; all GTS4 have the AWD, otherwise it'd just be a GTS.

Most Skylines have HICAS (4 Wheel Steer), pretty sure was standard on all but the most povo-spec ones.

the revs seem to jump abit not by much maybe 200-300 rpms

If it's sort of jumping from idle by 2-300rpm when you lock the wheel either side, as others have said it's nothing to worry about, but have a look under your car & check the condition of the usual suspension stuff like end links, ball joints & rubber cv boots etc

All cars with belt driven power steering have a power steering pressure switch with sends a message to a AAC valve which idles the engine up to stop it from stalling with the load created on the crankshaft.

Your car is a GTS-4 simply look in your engine bay at the fire wall and if the engraving is ENR33 (6 numbers) then thats a GTS-4. Slip light is simply loss of traction, the system is RWD and depending on how much slip the computer reads from a lot of sensors about 100 times a second it will send power to the wheels anywhere from 0-50% to the front.

All GTS-4's that are R33 and R34 NEVER came with HICAS (4 wheel steer) from Nissan because they are non-turbos and with the 4WD parts in the car making excess weight they did not follow in fitting it. The GTS comes with it because its RWD and 60kg lighter. I wouldnt worry about HICAS though, everyone sees the light sooner or later and just locks the 4 wheel steer.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • What bedding in procedure did you use?   When you say stutter, what exactly do you mean? Like it feels like someone letting go of the brakes momentarily and regrabbing them again to get you to stop? Re-reading your post, and that is what it kind of makes me think you're explaining, like theres a little bit of a jolt, likely just as you're reaching a stop. I've only had this issue once. And if its caused by what caused mine, you will want to get the car up on stands again and check it over. Mine was a case of a caliper mounting bolt coming out and letting the caliper rotate on the other remaining bolt and gave play in a wheel as it came to a stop. But not every stop either!
    • Yeop... binned it   This will be a summary will not many pics atm and cbf  Fixed the samsonas - it was totally munched Put a new precision 7675 T4 on with proper split pulse mani Got to Sydney to get to car - drove to canberra to get racecar - drive back to sydney that night Next day all day at Plasmaman putting on new clamps cleaning some things up and adding another large engine oil cooler sitting at the rear above diffuser to keep things cooler Next day - Tuesday - on Dyno - killer wikid awesome pumped out really good numbers - more mid range and on lower boost levels Wednesday - first prac - all day again getting the suspension right - had to borrow front suspension again - out do a lap come in - out do a lap - in - what i had just couldnt handle the load at the more consistent higher speeds - got a lap in at the end of the day that was pretty reasonable  Put it this way that lap wouldve had me in 4th in Pro am for the whole event - with only 700 hp and used tyres Thurs first official prac day - lap out warm up - then entered a hotlap with above setting and 80% effort took corners 1,2,3 and into 4 car felt awesome -  rear came around out of nowhere bang into the wall near front on at whatever 140 kmph Done, over, gone Just one of those how did that happen apparently as all indications show nothing out of the ordinary Got to spend the rest of the time at the event like I hadnt done before - was actually Ok mainly as I had my family and my boy is 9 and got treated like a rockstar Long trip home, lost a trailer wheel in nowhere land, X5 airbag suspension gave up half way across nullabour and rode on bumps stops (its now completely fine) had to do a 19 hr drive day on day 3 as accommodation got screwed up so just had to keep driving till found a town with some Now to reassess - hopefully the motor and other things are OK but yet to be seen too. There is no easy fix there is no i'll just order that part and get it sent - we'll have a talk to people see what can happen and what the go is but at minimum its rebuild from scratch struts forward and alot of time effort and $ should and if I return and if but maybe/ when  I have the cage tied into the front strut towers - if I didnt have that things couldnt been worse you can say its just a front end but if you know what goes into these cars... you'll know what that actually means in reality   Car was very fast. Disappointing we just didnt get to show it Effort doesnt win you races though     Apparently this is motorsport !  
    • Thanks, will do that.  Thankfully they still feel great.
    • Yeah man, absolutely. You can try pushing me all the way in swapping the R34 for an E9x M3 
    • It's almost certainly going to be some amount of pads compound transfer onto the rotors. It will probably go away after you've run them for a bit. If not, pull it all out, lightly sand the rotors, scuff the pads, and rebed.
×
×
  • Create New...