Jump to content
SAU Community

Recommended Posts

1 piece split dump pipe (i believe its a jjr one) $150

post-27276-0-77103500-1313383632_thumb.jpg post-27276-0-78181600-1313383653_thumb.jpg

Blitz BOV, has an attachment (flange needs to be welded to the tube) to plumb it back if mounted in the factory position, DOSE NOT come with the adaptor to mount in the factory position $60

post-27276-0-92676600-1313383389_thumb.jpg post-27276-0-96208500-1313383417_thumb.jpg

6x factory gtr coils (Will also fit S1 R33 and R32), all worked well, i replaced them with yellow jackets when i put the 3540 on $120

post-27276-0-75948700-1313383503_thumb.jpg post-27276-0-69864300-1313383518_thumb.jpg

Crank angle sensor, bought it to try to fix a problem but the cas was not the problem $70

post-27276-0-39312500-1313383342_thumb.jpg

S1 igniter, once again bought to fix a problem, it wasnt the igniter either, i have 2 of these $90 each.

post-27276-0-75980300-1313383667_thumb.jpg

Standard front and rear struts with lowered rsr springs, no leaks worked well, replaced them with height adjustable coil overs when i got defected for too low (the only part of the car that was too low was a flange on the exhaust) $275

post-27276-0-94791400-1313383691_thumb.jpg post-27276-0-90965700-1313383707_thumb.jpg

S1 R33 grill with red S badge, replaced with GTR style grill but i didnt like the red badge so i swapped it for the factory chrome one, two clips missing of the back, just missing not broken, if this is to replace a damaged grill you could probably get a couple out of the one, how ever the center one is broken off, only ever had 3 or 4 of them on when it was on the car and was 100% secure without the middle one $30

post-27276-0-22794100-1313383447_thumb.jpg post-27276-0-82797200-1313383479_thumb.jpg

Factory gearbox speed sensor, came off a S1 R33 gtst no idea what other models it would fit, one again bought to fix a problem and that was not the problem $60

post-27276-0-13108800-1313383366_thumb.jpg

Battery box, no strap or brackets $30

post-27276-0-42989400-1313383722_thumb.jpg

S1 R33 indicators with built in driving/fog lights $40

post-27276-0-44095900-1313383302_thumb.jpg post-27276-0-13833300-1313383322_thumb.jpg

All prices are negotiable so throw me an offer, will also swap for an unmolested Mspec front bar and reo (happy to deal if you have either or both) for a S1 R33 gtst.

Link to comment
https://www.sau.com.au/forums/topic/374105-r33-parts/
Share on other sites

how much you want for the front and rear shocks? Could you please sms me reply on 0404085915 thanks

Do you meen without the springs? if so im not willing to separate atm, price is up there for the lot or throw me an offer.

All pm's have been replied to.

Edited by W0rp3D
Link to comment
https://www.sau.com.au/forums/topic/374105-r33-parts/#findComment-5968262
Share on other sites

Struts and Mspec lights sold, also have a HKS mushroom pod.

Comes as pictured, it did have a securing bracket but that seems to have gone missing, if i find it before it is sold i will include it other wise it does not come with it $60

post-27276-0-19229200-1313490990_thumb.jpg post-27276-0-15147200-1313491010_thumb.jpg

Everything else below is still available.

1 piece split dump pipe (i believe its a jjr one) $150

post-27276-0-77103500-1313383632_thumb.jpg post-27276-0-78181600-1313383653_thumb.jpg

Blitz BOV, has an attachment (flange needs to be welded to the tube) to plumb it back if mounted in the factory position, DOSE NOT come with the adaptor to mount in the factory position $60

post-27276-0-92676600-1313383389_thumb.jpg post-27276-0-96208500-1313383417_thumb.jpg

6x factory gtr coils (Will also fit S1 R33 and R32), all worked well, i replaced them with yellow jackets when i put the 3540 on $120

post-27276-0-75948700-1313383503_thumb.jpg post-27276-0-69864300-1313383518_thumb.jpg

Crank angle sensor, bought it to try to fix a problem but the cas was not the problem $70

post-27276-0-39312500-1313383342_thumb.jpg

S1 igniter, once again bought to fix a problem, it wasnt the igniter either, i have 2 of these $90 each.

post-27276-0-75980300-1313383667_thumb.jpg

S1 R33 grill with red S badge, replaced with GTR style grill but i didnt like the red badge so i swapped it for the factory chrome one, two clips missing of the back, just missing not broken, if this is to replace a damaged grill you could probably get a couple out of the one, how ever the center one is broken off, only ever had 3 or 4 of them on when it was on the car and was 100% secure without the middle one $30

post-27276-0-22794100-1313383447_thumb.jpg post-27276-0-82797200-1313383479_thumb.jpg

Factory gearbox speed sensor, came off a S1 R33 gtst no idea what other models it would fit, one again bought to fix a problem and that was not the problem $60

post-27276-0-13108800-1313383366_thumb.jpg

Battery box, no strap or brackets $30

post-27276-0-42989400-1313383722_thumb.jpg

All prices are negotiable so throw me an offer, will also swap for an unmolested Mspec front bar and reo (happy to deal if you have either or both) for a S1 R33 gtst.

Link to comment
https://www.sau.com.au/forums/topic/374105-r33-parts/#findComment-5969955
Share on other sites

Adding a S1 vented fibreglass bonnet:

Good condition, does not come with washer jets $200

post-27276-0-38573200-1313905951_thumb.jpg post-27276-0-73428000-1313906196_thumb.jpg

Comes as pictured, it did have a securing bracket but that seems to have gone missing, if i find it before it is sold i will include it other wise it does not come with it $60

post-27276-0-19229200-1313490990_thumb.jpg post-27276-0-15147200-1313491010_thumb.jpg

1 piece split dump pipe (i believe its a jjr one) $150

post-27276-0-77103500-1313383632_thumb.jpg post-27276-0-78181600-1313383653_thumb.jpg

Blitz BOV, has an attachment (flange needs to be welded to the tube) to plumb it back if mounted in the factory position, DOSE NOT come with the adaptor to mount in the factory position $60

post-27276-0-92676600-1313383389_thumb.jpg post-27276-0-96208500-1313383417_thumb.jpg

6x factory gtr coils (Will also fit S1 R33 and R32), all worked well, i replaced them with yellow jackets when i put the 3540 on $120

post-27276-0-75948700-1313383503_thumb.jpg post-27276-0-69864300-1313383518_thumb.jpg

Crank angle sensor, bought it to try to fix a problem but the cas was not the problem $70

post-27276-0-39312500-1313383342_thumb.jpg

S1 igniter, once again bought to fix a problem, it wasnt the igniter either, i have 2 of these $90 each.

post-27276-0-75980300-1313383667_thumb.jpg

S1 R33 grill with red S badge, replaced with GTR style grill but i didnt like the red badge so i swapped it for the factory chrome one, two clips missing of the back, just missing not broken, if this is to replace a damaged grill you could probably get a couple out of the one, how ever the center one is broken off, only ever had 3 or 4 of them on when it was on the car and was 100% secure without the middle one $30

post-27276-0-22794100-1313383447_thumb.jpg post-27276-0-82797200-1313383479_thumb.jpg

Factory gearbox speed sensor, came off a S1 R33 gtst no idea what other models it would fit, one again bought to fix a problem and that was not the problem $60

post-27276-0-13108800-1313383366_thumb.jpg

Battery box, no strap or brackets $30

post-27276-0-42989400-1313383722_thumb.jpg

All prices are negotiable so throw me an offer, will also swap for an unmolested Mspec front bar and reo (happy to deal if you have either or both) for a S1 R33 gtst.

Link to comment
https://www.sau.com.au/forums/topic/374105-r33-parts/#findComment-5977235
Share on other sites

Bonnet sold.

grill, hks pod and dump pipe sold pending payment.

Below is what is left.

Blitz BOV, has an attachment (flange needs to be welded to the tube) to plumb it back if mounted in the factory position, DOSE NOT come with the adaptor to mount in the factory position $60

post-27276-0-92676600-1313383389_thumb.jpg post-27276-0-96208500-1313383417_thumb.jpg

6x factory gtr coils (Will also fit S1 R33 and R32), all worked well, i replaced them with yellow jackets when i put the 3540 on $120

post-27276-0-75948700-1313383503_thumb.jpg post-27276-0-69864300-1313383518_thumb.jpg

Crank angle sensor, bought it to try to fix a problem but the cas was not the problem $70

post-27276-0-39312500-1313383342_thumb.jpg

S1 igniter, once again bought to fix a problem, it wasnt the igniter either, i have 2 of these $90 each.

post-27276-0-75980300-1313383667_thumb.jpg

Factory gearbox speed sensor, came off a S1 R33 gtst no idea what other models it would fit, one again bought to fix a problem and that was not the problem $60

post-27276-0-13108800-1313383366_thumb.jpg

Battery box, no strap or brackets $30

post-27276-0-42989400-1313383722_thumb.jpg

All prices are negotiable so throw me an offer, will also swap for an unmolested Mspec front bar and reo (happy to deal if you have either or both) for a S1 R33 gtst.

Edited by W0rp3D
Link to comment
https://www.sau.com.au/forums/topic/374105-r33-parts/#findComment-5983285
Share on other sites

Dump pipe, pod and grill back up for sale.

Comes as pictured, it did have a securing bracket but that seems to have gone missing, if i find it before it is sold i will include it other wise it does not come with it $60

post-27276-0-19229200-1313490990_thumb.jpg post-27276-0-15147200-1313491010_thumb.jpg

1 piece split dump pipe (i believe its a jjr one) $150

post-27276-0-77103500-1313383632_thumb.jpg post-27276-0-78181600-1313383653_thumb.jpg

Blitz BOV, has an attachment (flange needs to be welded to the tube) to plumb it back if mounted in the factory position, DOSE NOT come with the adaptor to mount in the factory position $60

post-27276-0-92676600-1313383389_thumb.jpg post-27276-0-96208500-1313383417_thumb.jpg

6x factory gtr coils (Will also fit S1 R33 and R32), all worked well, i replaced them with yellow jackets when i put the 3540 on $120

post-27276-0-75948700-1313383503_thumb.jpg post-27276-0-69864300-1313383518_thumb.jpg

Crank angle sensor, bought it to try to fix a problem but the cas was not the problem $70

post-27276-0-39312500-1313383342_thumb.jpg

S1 igniter, once again bought to fix a problem, it wasnt the igniter either, i have 2 of these $90 each.

post-27276-0-75980300-1313383667_thumb.jpg

S1 R33 grill with red S badge, replaced with GTR style grill but i didnt like the red badge so i swapped it for the factory chrome one, two clips missing of the back, just missing not broken, if this is to replace a damaged grill you could probably get a couple out of the one, how ever the center one is broken off, only ever had 3 or 4 of them on when it was on the car and was 100% secure without the middle one $30

post-27276-0-22794100-1313383447_thumb.jpg post-27276-0-82797200-1313383479_thumb.jpg

Factory gearbox speed sensor, came off a S1 R33 gtst no idea what other models it would fit, one again bought to fix a problem and that was not the problem $60

post-27276-0-13108800-1313383366_thumb.jpg

Battery box, no strap or brackets $30

post-27276-0-42989400-1313383722_thumb.jpg

All prices are negotiable so throw me an offer, will also swap for an unmolested Mspec front bar and reo (happy to deal if you have either or both) for a S1 R33 gtst.

Link to comment
https://www.sau.com.au/forums/topic/374105-r33-parts/#findComment-5985994
Share on other sites

CAS sold.

HKS mushroom pod, Comes as pictured, it did have a securing bracket but that seems to have gone missing, if i find it before it is sold i will include it other wise it does not come with it $60

post-27276-0-19229200-1313490990_thumb.jpg post-27276-0-15147200-1313491010_thumb.jpg

1 piece split dump pipe (i believe its a jjr one) $150

post-27276-0-77103500-1313383632_thumb.jpg post-27276-0-78181600-1313383653_thumb.jpg

Blitz BOV, has an attachment (flange needs to be welded to the tube) to plumb it back if mounted in the factory position, DOSE NOT come with the adaptor to mount in the factory position $60

post-27276-0-92676600-1313383389_thumb.jpg post-27276-0-96208500-1313383417_thumb.jpg

6x factory gtr coils (Will also fit S1 R33 and R32), all worked well, i replaced them with yellow jackets when i put the 3540 on $120

post-27276-0-75948700-1313383503_thumb.jpg post-27276-0-69864300-1313383518_thumb.jpg

S1 igniter, once again bought to fix a problem, it wasnt the igniter either, i have 2 of these $90 each.

post-27276-0-75980300-1313383667_thumb.jpg

S1 R33 grill with red S badge, replaced with GTR style grill but i didnt like the red badge so i swapped it for the factory chrome one, two clips missing of the back, just missing not broken, if this is to replace a damaged grill you could probably get a couple out of the one, how ever the center one is broken off, only ever had 3 or 4 of them on when it was on the car and was 100% secure without the middle one $30

post-27276-0-22794100-1313383447_thumb.jpg post-27276-0-82797200-1313383479_thumb.jpg

Factory gearbox speed sensor, came off a S1 R33 gtst no idea what other models it would fit, one again bought to fix a problem and that was not the problem $60

post-27276-0-13108800-1313383366_thumb.jpg

Battery box, no strap or brackets $30

post-27276-0-42989400-1313383722_thumb.jpg

All prices are negotiable so throw me an offer, will also swap for an unmolested Mspec front bar and reo (happy to deal if you have either or both) for a S1 R33 gtst.

Link to comment
https://www.sau.com.au/forums/topic/374105-r33-parts/#findComment-5986654
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • LOL, all of the CAI like Craig I just need to put a hole saw through my bumper Done and dusted, the car runs, which is nice, I'll take it for a spin when the weather clears up Just need to put the bumper back on for good
    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
×
×
  • Create New...