Jump to content
SAU Community

Recommended Posts

1 piece split dump pipe (i believe its a jjr one) $150

post-27276-0-77103500-1313383632_thumb.jpg post-27276-0-78181600-1313383653_thumb.jpg

Blitz BOV, has an attachment (flange needs to be welded to the tube) to plumb it back if mounted in the factory position, DOSE NOT come with the adaptor to mount in the factory position $60

post-27276-0-92676600-1313383389_thumb.jpg post-27276-0-96208500-1313383417_thumb.jpg

6x factory gtr coils (Will also fit S1 R33 and R32), all worked well, i replaced them with yellow jackets when i put the 3540 on $120

post-27276-0-75948700-1313383503_thumb.jpg post-27276-0-69864300-1313383518_thumb.jpg

Crank angle sensor, bought it to try to fix a problem but the cas was not the problem $70

post-27276-0-39312500-1313383342_thumb.jpg

S1 igniter, once again bought to fix a problem, it wasnt the igniter either, i have 2 of these $90 each.

post-27276-0-75980300-1313383667_thumb.jpg

Standard front and rear struts with lowered rsr springs, no leaks worked well, replaced them with height adjustable coil overs when i got defected for too low (the only part of the car that was too low was a flange on the exhaust) $275

post-27276-0-94791400-1313383691_thumb.jpg post-27276-0-90965700-1313383707_thumb.jpg

S1 R33 grill with red S badge, replaced with GTR style grill but i didnt like the red badge so i swapped it for the factory chrome one, two clips missing of the back, just missing not broken, if this is to replace a damaged grill you could probably get a couple out of the one, how ever the center one is broken off, only ever had 3 or 4 of them on when it was on the car and was 100% secure without the middle one $30

post-27276-0-22794100-1313383447_thumb.jpg post-27276-0-82797200-1313383479_thumb.jpg

Factory gearbox speed sensor, came off a S1 R33 gtst no idea what other models it would fit, one again bought to fix a problem and that was not the problem $60

post-27276-0-13108800-1313383366_thumb.jpg

Battery box, no strap or brackets $30

post-27276-0-42989400-1313383722_thumb.jpg

S1 R33 indicators with built in driving/fog lights $40

post-27276-0-44095900-1313383302_thumb.jpg post-27276-0-13833300-1313383322_thumb.jpg

All prices are negotiable so throw me an offer, will also swap for an unmolested Mspec front bar and reo (happy to deal if you have either or both) for a S1 R33 gtst.

Link to comment
https://www.sau.com.au/forums/topic/374105-r33-parts/
Share on other sites

how much you want for the front and rear shocks? Could you please sms me reply on 0404085915 thanks

Do you meen without the springs? if so im not willing to separate atm, price is up there for the lot or throw me an offer.

All pm's have been replied to.

Edited by W0rp3D
Link to comment
https://www.sau.com.au/forums/topic/374105-r33-parts/#findComment-5968262
Share on other sites

Struts and Mspec lights sold, also have a HKS mushroom pod.

Comes as pictured, it did have a securing bracket but that seems to have gone missing, if i find it before it is sold i will include it other wise it does not come with it $60

post-27276-0-19229200-1313490990_thumb.jpg post-27276-0-15147200-1313491010_thumb.jpg

Everything else below is still available.

1 piece split dump pipe (i believe its a jjr one) $150

post-27276-0-77103500-1313383632_thumb.jpg post-27276-0-78181600-1313383653_thumb.jpg

Blitz BOV, has an attachment (flange needs to be welded to the tube) to plumb it back if mounted in the factory position, DOSE NOT come with the adaptor to mount in the factory position $60

post-27276-0-92676600-1313383389_thumb.jpg post-27276-0-96208500-1313383417_thumb.jpg

6x factory gtr coils (Will also fit S1 R33 and R32), all worked well, i replaced them with yellow jackets when i put the 3540 on $120

post-27276-0-75948700-1313383503_thumb.jpg post-27276-0-69864300-1313383518_thumb.jpg

Crank angle sensor, bought it to try to fix a problem but the cas was not the problem $70

post-27276-0-39312500-1313383342_thumb.jpg

S1 igniter, once again bought to fix a problem, it wasnt the igniter either, i have 2 of these $90 each.

post-27276-0-75980300-1313383667_thumb.jpg

S1 R33 grill with red S badge, replaced with GTR style grill but i didnt like the red badge so i swapped it for the factory chrome one, two clips missing of the back, just missing not broken, if this is to replace a damaged grill you could probably get a couple out of the one, how ever the center one is broken off, only ever had 3 or 4 of them on when it was on the car and was 100% secure without the middle one $30

post-27276-0-22794100-1313383447_thumb.jpg post-27276-0-82797200-1313383479_thumb.jpg

Factory gearbox speed sensor, came off a S1 R33 gtst no idea what other models it would fit, one again bought to fix a problem and that was not the problem $60

post-27276-0-13108800-1313383366_thumb.jpg

Battery box, no strap or brackets $30

post-27276-0-42989400-1313383722_thumb.jpg

All prices are negotiable so throw me an offer, will also swap for an unmolested Mspec front bar and reo (happy to deal if you have either or both) for a S1 R33 gtst.

Link to comment
https://www.sau.com.au/forums/topic/374105-r33-parts/#findComment-5969955
Share on other sites

Adding a S1 vented fibreglass bonnet:

Good condition, does not come with washer jets $200

post-27276-0-38573200-1313905951_thumb.jpg post-27276-0-73428000-1313906196_thumb.jpg

Comes as pictured, it did have a securing bracket but that seems to have gone missing, if i find it before it is sold i will include it other wise it does not come with it $60

post-27276-0-19229200-1313490990_thumb.jpg post-27276-0-15147200-1313491010_thumb.jpg

1 piece split dump pipe (i believe its a jjr one) $150

post-27276-0-77103500-1313383632_thumb.jpg post-27276-0-78181600-1313383653_thumb.jpg

Blitz BOV, has an attachment (flange needs to be welded to the tube) to plumb it back if mounted in the factory position, DOSE NOT come with the adaptor to mount in the factory position $60

post-27276-0-92676600-1313383389_thumb.jpg post-27276-0-96208500-1313383417_thumb.jpg

6x factory gtr coils (Will also fit S1 R33 and R32), all worked well, i replaced them with yellow jackets when i put the 3540 on $120

post-27276-0-75948700-1313383503_thumb.jpg post-27276-0-69864300-1313383518_thumb.jpg

Crank angle sensor, bought it to try to fix a problem but the cas was not the problem $70

post-27276-0-39312500-1313383342_thumb.jpg

S1 igniter, once again bought to fix a problem, it wasnt the igniter either, i have 2 of these $90 each.

post-27276-0-75980300-1313383667_thumb.jpg

S1 R33 grill with red S badge, replaced with GTR style grill but i didnt like the red badge so i swapped it for the factory chrome one, two clips missing of the back, just missing not broken, if this is to replace a damaged grill you could probably get a couple out of the one, how ever the center one is broken off, only ever had 3 or 4 of them on when it was on the car and was 100% secure without the middle one $30

post-27276-0-22794100-1313383447_thumb.jpg post-27276-0-82797200-1313383479_thumb.jpg

Factory gearbox speed sensor, came off a S1 R33 gtst no idea what other models it would fit, one again bought to fix a problem and that was not the problem $60

post-27276-0-13108800-1313383366_thumb.jpg

Battery box, no strap or brackets $30

post-27276-0-42989400-1313383722_thumb.jpg

All prices are negotiable so throw me an offer, will also swap for an unmolested Mspec front bar and reo (happy to deal if you have either or both) for a S1 R33 gtst.

Link to comment
https://www.sau.com.au/forums/topic/374105-r33-parts/#findComment-5977235
Share on other sites

Bonnet sold.

grill, hks pod and dump pipe sold pending payment.

Below is what is left.

Blitz BOV, has an attachment (flange needs to be welded to the tube) to plumb it back if mounted in the factory position, DOSE NOT come with the adaptor to mount in the factory position $60

post-27276-0-92676600-1313383389_thumb.jpg post-27276-0-96208500-1313383417_thumb.jpg

6x factory gtr coils (Will also fit S1 R33 and R32), all worked well, i replaced them with yellow jackets when i put the 3540 on $120

post-27276-0-75948700-1313383503_thumb.jpg post-27276-0-69864300-1313383518_thumb.jpg

Crank angle sensor, bought it to try to fix a problem but the cas was not the problem $70

post-27276-0-39312500-1313383342_thumb.jpg

S1 igniter, once again bought to fix a problem, it wasnt the igniter either, i have 2 of these $90 each.

post-27276-0-75980300-1313383667_thumb.jpg

Factory gearbox speed sensor, came off a S1 R33 gtst no idea what other models it would fit, one again bought to fix a problem and that was not the problem $60

post-27276-0-13108800-1313383366_thumb.jpg

Battery box, no strap or brackets $30

post-27276-0-42989400-1313383722_thumb.jpg

All prices are negotiable so throw me an offer, will also swap for an unmolested Mspec front bar and reo (happy to deal if you have either or both) for a S1 R33 gtst.

Edited by W0rp3D
Link to comment
https://www.sau.com.au/forums/topic/374105-r33-parts/#findComment-5983285
Share on other sites

Dump pipe, pod and grill back up for sale.

Comes as pictured, it did have a securing bracket but that seems to have gone missing, if i find it before it is sold i will include it other wise it does not come with it $60

post-27276-0-19229200-1313490990_thumb.jpg post-27276-0-15147200-1313491010_thumb.jpg

1 piece split dump pipe (i believe its a jjr one) $150

post-27276-0-77103500-1313383632_thumb.jpg post-27276-0-78181600-1313383653_thumb.jpg

Blitz BOV, has an attachment (flange needs to be welded to the tube) to plumb it back if mounted in the factory position, DOSE NOT come with the adaptor to mount in the factory position $60

post-27276-0-92676600-1313383389_thumb.jpg post-27276-0-96208500-1313383417_thumb.jpg

6x factory gtr coils (Will also fit S1 R33 and R32), all worked well, i replaced them with yellow jackets when i put the 3540 on $120

post-27276-0-75948700-1313383503_thumb.jpg post-27276-0-69864300-1313383518_thumb.jpg

Crank angle sensor, bought it to try to fix a problem but the cas was not the problem $70

post-27276-0-39312500-1313383342_thumb.jpg

S1 igniter, once again bought to fix a problem, it wasnt the igniter either, i have 2 of these $90 each.

post-27276-0-75980300-1313383667_thumb.jpg

S1 R33 grill with red S badge, replaced with GTR style grill but i didnt like the red badge so i swapped it for the factory chrome one, two clips missing of the back, just missing not broken, if this is to replace a damaged grill you could probably get a couple out of the one, how ever the center one is broken off, only ever had 3 or 4 of them on when it was on the car and was 100% secure without the middle one $30

post-27276-0-22794100-1313383447_thumb.jpg post-27276-0-82797200-1313383479_thumb.jpg

Factory gearbox speed sensor, came off a S1 R33 gtst no idea what other models it would fit, one again bought to fix a problem and that was not the problem $60

post-27276-0-13108800-1313383366_thumb.jpg

Battery box, no strap or brackets $30

post-27276-0-42989400-1313383722_thumb.jpg

All prices are negotiable so throw me an offer, will also swap for an unmolested Mspec front bar and reo (happy to deal if you have either or both) for a S1 R33 gtst.

Link to comment
https://www.sau.com.au/forums/topic/374105-r33-parts/#findComment-5985994
Share on other sites

CAS sold.

HKS mushroom pod, Comes as pictured, it did have a securing bracket but that seems to have gone missing, if i find it before it is sold i will include it other wise it does not come with it $60

post-27276-0-19229200-1313490990_thumb.jpg post-27276-0-15147200-1313491010_thumb.jpg

1 piece split dump pipe (i believe its a jjr one) $150

post-27276-0-77103500-1313383632_thumb.jpg post-27276-0-78181600-1313383653_thumb.jpg

Blitz BOV, has an attachment (flange needs to be welded to the tube) to plumb it back if mounted in the factory position, DOSE NOT come with the adaptor to mount in the factory position $60

post-27276-0-92676600-1313383389_thumb.jpg post-27276-0-96208500-1313383417_thumb.jpg

6x factory gtr coils (Will also fit S1 R33 and R32), all worked well, i replaced them with yellow jackets when i put the 3540 on $120

post-27276-0-75948700-1313383503_thumb.jpg post-27276-0-69864300-1313383518_thumb.jpg

S1 igniter, once again bought to fix a problem, it wasnt the igniter either, i have 2 of these $90 each.

post-27276-0-75980300-1313383667_thumb.jpg

S1 R33 grill with red S badge, replaced with GTR style grill but i didnt like the red badge so i swapped it for the factory chrome one, two clips missing of the back, just missing not broken, if this is to replace a damaged grill you could probably get a couple out of the one, how ever the center one is broken off, only ever had 3 or 4 of them on when it was on the car and was 100% secure without the middle one $30

post-27276-0-22794100-1313383447_thumb.jpg post-27276-0-82797200-1313383479_thumb.jpg

Factory gearbox speed sensor, came off a S1 R33 gtst no idea what other models it would fit, one again bought to fix a problem and that was not the problem $60

post-27276-0-13108800-1313383366_thumb.jpg

Battery box, no strap or brackets $30

post-27276-0-42989400-1313383722_thumb.jpg

All prices are negotiable so throw me an offer, will also swap for an unmolested Mspec front bar and reo (happy to deal if you have either or both) for a S1 R33 gtst.

Link to comment
https://www.sau.com.au/forums/topic/374105-r33-parts/#findComment-5986654
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The ATTESSA is functionally identical to R34; there were a bunch of JDM models that continued ATTESSA including Fuga/Q70, Skyline/Q50, Cima etc as an option. All with Auto only and I think mostly for snow regions. AFAIK there were no AWD VR30DDTT sold in Australia - it is on my to do list to check regs for racing a LHD car in Targa/ATR/AASA/CAMS events because if I can get the auto to work it would be interesting to run a 4wd car The Ecuteck TCM tuning is the same model as their ECU tuning, they already have it for R35 and Dose's favourite, BMW. You buy "points" to allow your computer to be tuned, buy either a bluetooth (phone app) or bluetooth+USB+Key (phone and PC) dongle, and pay for a tune that will be locked to your tuner ( ). You can also access the tuning software yourself but 1. it is mega expensive and 2. these computers have a billion parameters that intersect, so how could you ever spend enough time on it to get a decent result.
    • Or, is it a case of what it is like owning an R series Skyline? NFI what the previous owner has done or fiddled with... Ha ha ha After reading through this thread, I went on a bit of a research about the Q50/Q60. Now I'm quite intrigued by them! Is the AWD in them more like a WRX where it's always AWD, or is it more like the ATTESSA in the GTRs? By the sound of this TCU tuning, this sounds like a case of someone has made some real software for it, and you just need the right piece of hardware, and then you license that specific vehicle/TCU. Or is this a case of the software will be really expensive so only a few tuners have it, and you still have to pay a license per vehicle?
    • By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
    • No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
×
×
  • Create New...