Jump to content
SAU Community

Recommended Posts

Hey all my girlfriends R32 has had 2 motors die in her r32 and now she is deciding to drop a 25 in there so we have a heap of cheap parts that are up for sale, i'll start with a few things i can think of and add to the list as i find more stuff:

First RB20 (130,00K's)

Blown head gasket and exhaust valve, currently dismantled;

Bottom end is not that bad but the exhaust valve landed in the first piston bore and made some gouges in there :(

Head is seemingly fine except the exhaust valve will need replacing... offers on these two!!

Cams in perfect condition $ Offers

Second RB20 (76,000Ks)

Low Compression on 6th ran fine though just lean in the top end :(

Head is perfect (Just Tested) $250

Intake manifold $ Offers

Exhaust manifold (Just replaced with perfectly straight one) $100

Perfect Condition Cams $ Offers

Bottom end needs rebuild $ Offers

Also these Items;

1X RB20 turbo in decent condition $100

1X RB25 turbo in good condition minimal shaft play $250

1X RB25 turbo suit rebuild, held boost fine just a bit smoky every few days $ Offers

2X RB20 ignitor packs $ Offers

5X Rb20 Coils seem fine just installed one in my motor and it runs fine :) $25 Each

9X RB20 Injectors 6 are known to run fine 3 i've never driven with so may need to be tested $ Offers will sell lot or individually

1x RB20 Rocker Covers Painted metallic black $100

1x RB20 Rocker Covers silver oil hose connector is broken on one needs welding $30

1x RB20 Good condition Exedy Heavy Duty Clutch $ Offers

1x RB20 flywheel $80

1x R32 standard rear bar pretty beaten up Silver colour $50

1x pair of Monza front R32 shocks Good condition sit at a nice low height, top adjusting nut of one is damaged $150

If you are chasing any RB20 parts or wiring PM me here and i'll let you know if we have any ;)

Cheers, Tobbie 0418510695

Edited by tobs_r32
Link to comment
https://www.sau.com.au/forums/topic/374464-tons-of-rbr32-stuff-for-sale/
Share on other sites

I'm in Hobart area Sven. And yeah tof I only had it running in the car for around 6 or 7 hours and didn't really notice it until my mechanic went to tune it and compression tested it. It's pulled apart at tad engine reco atm

I'm in Hobart area Sven. And yeah tof I only had it running in the car for around 6 or 7 hours and didn't really notice it until my mechanic went to tune it and compression tested it. It's pulled apart at tas engine reco atm

yep cool, do you mind if i ring them about it? , how much are you chasing for it?

not a lot dude, after being buggered around so much myself with dodgy second hand parts i wouldn't do it haha! The head was fine and passed all the tests but mark was saying the bottom end is just worn and needs a pretty decent rebuild. I brought it off a guy on here as a fully working RB20 and only had it in a car for a few weeks. What are your plans for it??

NEW UPDATED LIST;

First RB20 (130,00K's)

Blown head gasket and exhaust valve, currently dismantled;

Bottom end is not that bad but the exhaust valve landed in the first piston bore and made some gouges in there :(

Head is seemingly fine except the exhaust valve will need replacing... offers on these two!!

Cams in perfect condition $ Offers

Second RB20 (76,000Ks)

Low Compression on 6th ran fine though just lean in the top end :(

Head is perfect (Just Tested) $250

Intake manifold $SOLD only the top half sold, still have sensors, 2x bottom manifolds etc.

Exhaust manifold (Just replaced with perfectly straight one) $100

Perfect Condition Cams $ Offers

Bottom end needs rebuild $ Offers

Also these Items;

1X RB20 turbo in decent condition $100

1X RB25 turbo in good condition minimal shaft play $SOLD

1X RB25 turbo suit rebuild, held boost fine just a bit smoky every few days $ Offers

2X RB20 ignitor packs $ SOLD

5X Rb20 Coils seem fine just installed one in my motor and it runs fine :) $25 Each

9X RB20 Injectors 6 are known to run fine 3 i've never driven with so may need to be tested $ Offers will sell lot or individually

1x RB20 Rocker Covers Painted metallic black $100

1x RB20 Rocker Covers silver oil hose connector is broken on one needs welding $30

1x RB20 Good condition Exedy Heavy Duty Clutch $ Offers

1x RB20 flywheel $SOLD

1X RB20 ECU - $SOLD

1x R32 standard rear bar pretty beaten up Silver colour $50

1x pair of Monza front R32 shocks Good condition sit at a nice low height, top adjusting nut of one is damaged $150

1X Perfect RB20/S1 RB25 AFM - $120

Coil Pack Looms - Sold

1x RB20 Intake pipe $40

4x Rb20 Cam Gears $20 each

1x Standard RB20 Coil Pack cover

1x R32 Reo plate for behind the backseat with bolts $50

Still have more wiring and sensors in good condition if your after any ;)

Cheers, Tobbie

Edited by tobs_r32
  • 4 weeks later...

Sill have most of this stuff and more!! Make me some offers!!!

Also have;

2x CAS - $offers

1X Pioneer CD Player good working condition $30

1X R32 straight pipe from the front pipe back (Decat as well) has all the hangers on it mounts up nice.. sounds ANIMAL!! $50

1x Front pair of ISC N1 coilovers 9 months old (7,000ks) Currently being rebuilt $500

1x Rear pair of bilstein Adjustables good condition $300

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
×
×
  • Create New...