Jump to content
SAU Community

Recommended Posts

Hey all my girlfriends R32 has had 2 motors die in her r32 and now she is deciding to drop a 25 in there so we have a heap of cheap parts that are up for sale, i'll start with a few things i can think of and add to the list as i find more stuff:

First RB20 (130,00K's)

Blown head gasket and exhaust valve, currently dismantled;

Bottom end is not that bad but the exhaust valve landed in the first piston bore and made some gouges in there :(

Head is seemingly fine except the exhaust valve will need replacing... offers on these two!!

Cams in perfect condition $ Offers

Second RB20 (76,000Ks)

Low Compression on 6th ran fine though just lean in the top end :(

Head is perfect (Just Tested) $250

Intake manifold $ Offers

Exhaust manifold (Just replaced with perfectly straight one) $100

Perfect Condition Cams $ Offers

Bottom end needs rebuild $ Offers

Also these Items;

1X RB20 turbo in decent condition $100

1X RB25 turbo in good condition minimal shaft play $250

1X RB25 turbo suit rebuild, held boost fine just a bit smoky every few days $ Offers

2X RB20 ignitor packs $ Offers

5X Rb20 Coils seem fine just installed one in my motor and it runs fine :) $25 Each

9X RB20 Injectors 6 are known to run fine 3 i've never driven with so may need to be tested $ Offers will sell lot or individually

1x RB20 Rocker Covers Painted metallic black $100

1x RB20 Rocker Covers silver oil hose connector is broken on one needs welding $30

1x RB20 Good condition Exedy Heavy Duty Clutch $ Offers

1x RB20 flywheel $80

1x R32 standard rear bar pretty beaten up Silver colour $50

1x pair of Monza front R32 shocks Good condition sit at a nice low height, top adjusting nut of one is damaged $150

If you are chasing any RB20 parts or wiring PM me here and i'll let you know if we have any ;)

Cheers, Tobbie 0418510695

Edited by tobs_r32
Link to comment
https://www.sau.com.au/forums/topic/374464-tons-of-rbr32-stuff-for-sale/
Share on other sites

I'm in Hobart area Sven. And yeah tof I only had it running in the car for around 6 or 7 hours and didn't really notice it until my mechanic went to tune it and compression tested it. It's pulled apart at tad engine reco atm

I'm in Hobart area Sven. And yeah tof I only had it running in the car for around 6 or 7 hours and didn't really notice it until my mechanic went to tune it and compression tested it. It's pulled apart at tas engine reco atm

yep cool, do you mind if i ring them about it? , how much are you chasing for it?

not a lot dude, after being buggered around so much myself with dodgy second hand parts i wouldn't do it haha! The head was fine and passed all the tests but mark was saying the bottom end is just worn and needs a pretty decent rebuild. I brought it off a guy on here as a fully working RB20 and only had it in a car for a few weeks. What are your plans for it??

NEW UPDATED LIST;

First RB20 (130,00K's)

Blown head gasket and exhaust valve, currently dismantled;

Bottom end is not that bad but the exhaust valve landed in the first piston bore and made some gouges in there :(

Head is seemingly fine except the exhaust valve will need replacing... offers on these two!!

Cams in perfect condition $ Offers

Second RB20 (76,000Ks)

Low Compression on 6th ran fine though just lean in the top end :(

Head is perfect (Just Tested) $250

Intake manifold $SOLD only the top half sold, still have sensors, 2x bottom manifolds etc.

Exhaust manifold (Just replaced with perfectly straight one) $100

Perfect Condition Cams $ Offers

Bottom end needs rebuild $ Offers

Also these Items;

1X RB20 turbo in decent condition $100

1X RB25 turbo in good condition minimal shaft play $SOLD

1X RB25 turbo suit rebuild, held boost fine just a bit smoky every few days $ Offers

2X RB20 ignitor packs $ SOLD

5X Rb20 Coils seem fine just installed one in my motor and it runs fine :) $25 Each

9X RB20 Injectors 6 are known to run fine 3 i've never driven with so may need to be tested $ Offers will sell lot or individually

1x RB20 Rocker Covers Painted metallic black $100

1x RB20 Rocker Covers silver oil hose connector is broken on one needs welding $30

1x RB20 Good condition Exedy Heavy Duty Clutch $ Offers

1x RB20 flywheel $SOLD

1X RB20 ECU - $SOLD

1x R32 standard rear bar pretty beaten up Silver colour $50

1x pair of Monza front R32 shocks Good condition sit at a nice low height, top adjusting nut of one is damaged $150

1X Perfect RB20/S1 RB25 AFM - $120

Coil Pack Looms - Sold

1x RB20 Intake pipe $40

4x Rb20 Cam Gears $20 each

1x Standard RB20 Coil Pack cover

1x R32 Reo plate for behind the backseat with bolts $50

Still have more wiring and sensors in good condition if your after any ;)

Cheers, Tobbie

Edited by tobs_r32
  • 4 weeks later...

Sill have most of this stuff and more!! Make me some offers!!!

Also have;

2x CAS - $offers

1X Pioneer CD Player good working condition $30

1X R32 straight pipe from the front pipe back (Decat as well) has all the hangers on it mounts up nice.. sounds ANIMAL!! $50

1x Front pair of ISC N1 coilovers 9 months old (7,000ks) Currently being rebuilt $500

1x Rear pair of bilstein Adjustables good condition $300

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...