Jump to content
SAU Community

Recommended Posts

Plenty of work ahead but perhaps not as much as it looks from the photos :)

Cheap car!! and actually passed RWC pretty well straight away so that's a good start.

I'll let the pictures do the talking for now, plenty of info and work coming up in the following months.

IMG_0670.jpg

Is anyone missing their mailbox? I think its under the car!!!!

IMG_0669.jpg

IMG_0682.jpg

Do you think that the pink number plates bring out my eyes?

IMG_0688.jpg

IMG_0666.jpg

IMG_0667.jpg

IMG_0675.jpg

IMG_0672.jpg

IMG_0692.jpg

Replaced both tie rod ends straight off the bat, as one of them looked like this...

IMG_0696.jpg

And replaced the hub on the same side for good measure, just in case anything was bent/damaged, and because the bearing didn't feel 100%... unfortunately it was an ABS hub onto a car without ABS, so it was time for another trademark Sam-spec backyard fix :P Who ever would have thought of using a coke bottle lid to fix a problem......just imagine what you could do with an entire Mount Franklin bottle.....

IMG_0697.jpg

Link to comment
https://www.sau.com.au/forums/topic/375033-kats-r33-gtst-project/
Share on other sites

Car is officially roadworthy and registered :)

couple of things to sort out

drivers' door doesn't shut as nicely as it should, and the key doesn't work in the lock of the same door properly.

couple of interior plastic trims need replacing with non-broken ones :)

wheels need a bit of a balance

still doesn't make power properly all the time, needs some tuning love I think. Read somewhere R33s don't like Nistune so that's a shame; PowerFC maybe, given that a bigger turbo will be on the cards for later on?? don't know enough about this side of things.

wow.... what made you think this is the right section of the forums for this thread....

Ive seen them turn up in the wrong thread before but this is obtuse

interested to see how/where your build goes though

*sigh.

I reported the post immediately when I realised it was in the COMPLETELY wrong section of the forum. I don't usually make mistakes like this :( and apparently the moderators took their time moving it, as it still hasn't been moved.

Hmm..

The possibilities are endless.

Anyway thanks for the altogether useful and productive advice you have all given so far :D

so we swapped the HKS pod for a generic pod PLUS a FMIC with all piping!

WTF!!

Pretty keen to get stuck into building this thing properly, but first i think it really needs a tune or SOMETHING since it uses about 540000L / 100km.

Sometime around Christmas we will strip the entire car and prep it for painting, inside and out. Panel shop can take care of the actual colour laying for us :)

Anyway thanks for the altogether useful and productive advice you have all given so far :D

don't mind the nerds, you DID post in the gaming section after all :nyaanyaa:

My first car was an r33 that had exactly the same colour scheme factory two tone silver & grey, ahh the memories

  • 2 weeks later...

so I'm having trouble chasing down the source of a misfire / spark breakdown..

Idles fine

Coasting down in gear misfires

Under part or full throttle misfires at random so hard the R&R must kick in or something because it's like the power just drops away for a moment now and then

I've changed the O2 sensor just behind the turbo, there looks to be another one in the rear of the catalytic convertor but I don't know what the deal is with that..? Is this a common issue?

There's also an earth strap just hanging free from the floorpan right next to the catalytic convertor... where is this supposed to go?

The earth strap in the engine bay from the motor to the strut tower is a piece of shit, I need to replace this because it's rubbish and I'm not happy with it at all.

Other than this issue the car's going alright :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • 2 spots that my exhaust guy joined the 2 pipes together  Made a big difference. I'm now able to live with it. I can make it louder if I want by removing the HKS caps.
    • Hi all, considering clutch upgrade to support 1130 engine hp from 1650cc injectors on e50 at 85% duty cycle (1650 x (11.85/14.7) x 85%). Narrows down to these three as they can be converted to use gm 26 spline input shaft if I ever want to use transmission with that input shaft (orc1000f and r3c easy/cheap just change center hub; tr2cd pricier must change clutch discs). Pricing orc1000f similar to tr2cd, r3c about usd 200 pricier. Orc1000f triple plate 200mm. Tr2cd twin plate 215mm. R3c triple plate 215mm. Claimed max torque : orc 1000f 723 lbs ft; tr2cd 800 lbs ft; r3c 1100 lbs ft. Why orc1000f triple plate but claims lower max torque vs tr2cd twins? Is orc1000f underrated? Any info maxing out these clutches? Info on street/traffic driveability/pedal feel? Thank you for any info on them.
    • Some troubleshooting, connect up a timing light/gun with a proper ignition lead on coil 1. Hold the revs at 4~4500rpm and see if your timing is all over the shop, scattering off its tits. If so, there's a high chance your CAS is fked. But I read you have a Link ECU ready to go in, why not just skip all this and put that in - will make troubleshooting so much easier.  
    • Misfires when the car is fully warm are generally attributed to the coils (and/or the igniter, on cars with a separate igniter). They can stop working properly when they get hot for a number of reasons. Either electric/electronic, or from thermal expansion opening up gaps and allowing HV leakage. Seeing as you have replaced the coils, that could/should rule them out. But I wouldn't always assume so. Were the coils genuine? Or is there a chance you have bought some counterfeit Chinesium shit? Then we're back onto loom connections. They can fail when warm/hot for the same reasons. Inspections, cleaning of contact surfaces, ensuring that terminals are fully inserted, etc etc, are all justified. The same (heat effects) holds true for the other electrics and their connectors. AFM & CAS, primarily. If you try that Chinesium AFM, drive it around on low load until it is properly hot, but do'nt give it more load than you have to, except when you need to see if it will still miss. I'm dead serious about the untrustworthiness of the calibration of those copy AFMs. Injectors are unlikely to get hot unless the fuel is coming back around hot. You could try squirting them with compressed air or freeze spray to cool them back down to see if they are maybe the cause.
    • Alright, all the plugs looks good. Noticed that it starts to get bad when the car is up to temp, that's when things starts to misfire hard. next to do is Injector cleaning and such. Got in touch with a shop to do work on the injectors next Monday also help on diagnosis.
×
×
  • Create New...