Jump to content
SAU Community

Someone With Knowledge Pls Help

Craigy B
 Share

Recommended Posts

Craigy B Apprentice

Craigy B

Posted
Posted

hey all... just bought myself an r33 gtst... its completely standard bar the 3" exhaust....

2 questions......

1: how much boost can a stock intercooler take.... is 10 ok?

2: and if i put a pod filter on will the spool be louder ? and flutter?

noob questions i know but u dont know if u dont ask ;)

cheers guys

Link to comment
https://www.sau.com.au/forums/topic/375231-someone-with-knowledge-pls-help/
Share on other sites
mad082 Grand Master

mad082

Posted
Posted

unless you have an aftermarket ecu it can't be tuned.

10psi is ok for the stock cooler, but you are better off with a front mount because the stock cooler is tiny and suffers from heat soak exceptionally fast.

as for flutter, you won't get it just by adding a pod, however you will be able to hear the induction noise and bov noise better.

ARTZ Grand Master

ARTZ

Posted
Posted

what do you mean it cant be tuned..you can still adjust timing and idle without an ECU and you can gap your spark plugs..that is tuning... Not that you should need to but it doesnt hurt to have it checked..

Maybe Ideally I should of said go get a dynorun but who cares..

On the street the stock cooler is adequate as long as your not driving around on redline..it is also more responsive

and what noise does a BOV make..flutter and with a pod you will hear it more so yes it will flutter a bit just by adding a pod..mine did..

Your gay tonight Mad go ride your bike...

bluey33 Experienced

bluey33

Posted
Posted

what do you mean it cant be tuned..you can still adjust timing and idle without an ECU and you can gap your spark plugs..that is tuning... Not that you should need to but it doesnt hurt to have it checked..

Maybe Ideally I should of said go get a dynorun but who cares..

On the street the stock cooler is adequate as long as your not driving around on redline..it is also more responsive

and what noise does a BOV make..flutter and with a pod you will hear it more so yes it will flutter a bit just by adding a pod..mine did..

Your gay tonight Mad go ride your bike...

You are no where!!

He asked for someone with knowledge, get out of this thread.

ARTZ Grand Master

ARTZ

Posted
Posted

screw you hippy....my car ran 11psi thru a stock cooler and a pod and quite happily made 185kws all day everyday for years and it used to flutter when I lifted off so how am I no where ??

Maybe it is you that has no knowledge as you have offered nothing in the form of opinion other than to disagree with me..

So get outta my face

TTT Grand Master

TTT

Posted
Posted

ARTZ - are the letters RET missing from the front of your username?

with a stock bov, you will not hear flutter. if the bov is blocked you will hear flutter.

the guy is talking about his skyline not a carb POS.

the stock R33 ecu can't be tuned.

you have the option of modifying it or replacing it with an aftermarket one.

or go real cheap and get a signal bender like SAFC so you can make changes to a:f ratios.

Adjusting Timing and idle and spark plug gap is tuning for a valiant.

OP - 10psi is fine (especially in tasmania) but you may come across the missfire type CUTOUT on cold nights on 10psi with no tuning and stock 20 year old coil packs.

If you want Flutter like you hear on silvias or your favourite japanese high power cars on youtube, you will need to block off the factory bov (not recommended).

ARTZ Grand Master

ARTZ

Posted
Posted

I can tune my suspension but it doesnt have an ECU

I can tune my radio, again no ECU

I can tune a guitar it also has no ECU

and yes I can tune my skyline to some extent without touching the ECU..

And as tilksie said you CAN remap a stock ECU which is tuning it

are you trying to tell me I should not adjust my timing idle or spark plug gap on my skyline, because all have been adjusted at some point or another..shit should I change them all back to stock :O

Now OP obviously has limited knowledge here and all I was implying is that he has his car checked out by a professional after changing things like boost and filters. At no point did I suggest he change his timing I was just making a point that other things can be tuned not just the ECU....

when you put a pod on the the BOV air mixes with the turbo reverb and causes somewhat of a flutter noise when you back off, no it isnt Hektik BOV flutter but it is a flutter noise none the less..

But you know it all numskulls come in here with your tiny ewang in your hand and your limited knowledge of bullshit and try to belittle me.. . bring it on fags Ive had a shit week and Im just in the mood for your BS..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • dbm7
      R34 Skyline climate control unit transistor

      By dbm7 · Posted

      Bit of a pity we don't have good images of the back/front of the PCB ~ that said, I found a YT vid of a teardown to replace dicky clock switches, and got enough of a glimpse to realize this PCB is the front-end to a connected to what I'll call PCBA, and as such this is all digital on this PCB..ergo, battery voltage probably doesn't make an appearance here ; that is, I'd expect them to do something on PCBA wrt power conditioning for the adjustment/display/switch PCB.... ....given what's transpired..ie; some permutation of 12vdc on a 5vdc with or without correct polarity...would explain why the zener said "no" and exploded. The transistor Q5 (M33) is likely to be a digital switching transistor...that is, package has builtin bias resistors to ensure it saturates as soon as base threshold voltage is reached (minimal rise/fall time)....and wrt the question 'what else could've fried?' ....well, I know there's an MCU on this board (display, I/O at a guess), and you hope they isolated it from this scenario...I got my crayons out, it looks a bit like this...   ...not a lot to see, or rather, everything you'd like to see disappears down a via to the other side...base drive for the transistor comes from somewhere else, what this transistor is switching is somewhere else...but the zener circuit is exclusive to all this ~ it's providing a set voltage (current limited by the 1K3 resistor R19)...and disappears somewhere else down the via I marked V out ; if the errant voltage 'jumped' the diode in the millisecond before it exploded, whatever that V out via feeds may have seen a spike... ....I'll just imagine that Q5 was switched off at the time, thus no damage should've been done....but whatever that zener feeds has to be checked... HTH
    • 25RBGT
      Got this r31 silhouette flood car to rebuild.

      By 25RBGT · Posted

      First time we have seen lights 
    • Wazmond
      WGNC34 - floor mats

      By Wazmond · Posted

      I think Fitmit had some, have a look on there (theyre Australian as well)
    • soviet_merlin
      Howdy Y'all

      By soviet_merlin · Posted

      Hah, fair enough! But if you learn with this one you can drive any other OEM manual. No modern luxury features like auto rev-matching or hillstart assist to give you a false sense of confidence. And a heavy car with not that much torque so it stalls easily. 
    • soviet_merlin
      WGNC34 - floor mats

      By soviet_merlin · Posted

      Actually, I'd say all three are the automatic option. Just the different trim levels. The manual would be RSFS, no? 
×
×
  • Create New...