Jump to content
SAU Community

Recommended Posts

After being mucked around lots I am seperating

The time has come to move on to a single turbo E85 setup, so im selling the following as a 449awkw package:

Power FC with hand controler $800

Z32 AFM's + plugs $200 each have done a few thousand Ks

2x 2860-5 turbos(less that 3000ks COST $2750))+Stock custom match ported manifolds(5 hours @ $140 an hour of porting by local performance shop).$1800

HKS split dumps(COST $900) $500

Trust -Greddy Suction Kit Skyline inc filters rb26 32 33 34 gtr( hard piped intake including filters cost about $1500) $900

Veilside 3.5" Y pipe Stainless (exhaust cost $3500) please note is only the Y pipe I am selling So 1/3 of the exhaust. $350

R34 GTR Wheels perfect condition no bends or buckels just professionally resprayed $1800

This setup was running on a built 2.6 and was one of Australia's most powerfull low mount garrett setups.

Cheers

Edited by grygtr
Link to comment
https://www.sau.com.au/forums/topic/375720-gtr-performance-parts/
Share on other sites

  • 2 weeks later...
  • 4 weeks later...

Most stuff is gone below is a list of what is left:

Z32 AFM's + plugs $200 each have done a few thousand Ks

Trust -Greddy Suction Kit Skyline inc filters rb26 32 33 34 gtr( hard piped intake including filters cost about $1500) $900 or $1250 with 2 z32 AFM's and plugs

Veilside 3.5" Y pipe Stainless (exhaust cost $3500) please note is only the Y pipe I am selling So 1/3 of the exhaust. $350

R34 GTR Wheels perfect condition no bends or buckels just professionally resprayed $1700

Prices reduced:

Power fc with hand contoller $750

Near mew Z32's $350 for the pair

Hard pipe Suction kit $850

3.5 " y pipe $300

Resprayed r34 gtr wheels with centre caps $1600

  • 5 months later...
  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • This looks great! Awesome to have the 5 speed with an LSD in this. The Recaro's look like SR2's or SR3's. It's a shame they've been retrimmed as they would have looked sweet in their original colours. I think I'd want my agent to be a little more up front and informative too. I've never imported but I reckon it would make me a little nervous, so the more info the better.
    • Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
    • My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
×
×
  • Create New...