Jump to content
SAU Community

[Qld] Smash Repairs, South Brisbane

VNS 24
 Share

Recommended Posts

VNS 24 Mentor

VNS 24

Posted
Posted

Hi everyone,

As topic suggests, I am looking for smash repair places in south Brisbane near Crestmead/Waterford areas. I searched up for similar topic and contacted DMD The Image but their number is disconnected.

Is there places that you guys could recommend that specialise in body kit repair? My front lip got two 10 inches cracks on both side under indicator lights from transporting and I am going through insurance.

Any information would be much appreciated.

Thank you.

Link to comment
https://www.sau.com.au/forums/topic/375771-qld-smash-repairs-south-brisbane/
Share on other sites
VNS 24 Mentor

VNS 24

Posted
  • Author
Posted

Cameron's Bodyworks in Coopers Plains. Really nice guy and very good reputation for quality work. His pricing isn't too bad either.

Oh and yes he specialises in body kits and what not.

Thanks, Hieu. I will give them a call in lunch time.

Are there any other places that are ok with fixing body kits around the area? I will have to get 2 quotes for insurance purpose.

Thanks.

VNS 24 Mentor

VNS 24

Posted
  • Author
Posted

oh theres also aero image garage. http://www.aeroimagegarage.com/ Anthony is really nice and I've only ever seen good stuff from him. Might be a bit closer to where you live as well.

Thanks for that again, Hieu.

Now I got 2 places, so will be making phone calls tomorrow. :)

Thanks, guys.

VNS 24 Mentor

VNS 24

Posted
  • Author
Posted

bit late - bradys body works -= coopers plains. he's built quite a few bonnets for me. never had an issue with cracking or bad paint.

Thanks, Chris. I will drop by and get a quote from them if one of the other two don't go well.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      I'm actually not sure - I think it was "Stealth Performance" (It really is near impossible to find a FEMALE 1/8BSPT to 1/8NPT male at ALL) but having the thing leveraged on a 90 degree angle on a small aluminium fitting is not too smart. Also in not too smart, I've drilled out the center of the broken fitting so there's maybe 0.00001mm of thread to bite into, so yeah. I may have to get it drilled/tapped/plugged entirely. Given I could conceivably tap a thread/adapter/pressure line in any point in the oil system I suppose it's feasible to run a line to the Nissan Sensor to keep the dash working. Do these exist in AN fittings and the like? Like an AN fitting that has a NPT (or other?) thread as well for putting a sensor in?
    • sonicii
      Anyone running the VQ37VHR with forced induction?

      By sonicii · Posted

      I would agree.  There will be an amount of boost you could run safely with an otherwise factory system, but it would be low enough to not be worth the cost.  And if you are reliving your 20s, you know a 'little bit' was never enough. Personally, if I didn't want to spend the money, then stick with NA bolt-ons, and maybe a tune.
    • Dose Pipe Sutututu
      Mistakes were made, my R34 Story

      By Dose Pipe Sutututu · Posted

      Fuark, at least the motor survived. What brand was the fitting that snapped?
    • GTSBoy
      Anyone running the VQ37VHR with forced induction?

      By GTSBoy · Posted

      Wrong question. There's no point in spending the rather large sum of cash and effort to add turbo, without taking it to the "sensible" limit of the motor itself. If you have to upgrade injectors, etc, then so be it. That is a tiny fraction of what it will cost you to turbo it.
    • GTSBoy
      Starter motor replacment teeth count.

      By GTSBoy · Posted

      Measure voltage at the starter solenoid terminal when the key is at start and it has clicked. If it is really low, then the suspicion falls on the ignition switch (contacts or wiring thereof) as causing a voltage drop instead of sending enough volts to throw the solenoid all the way to engage the starter itself. If it is a decent voltage, then the suspicion is on the solenoid. Might have s horted coil, or might hva dirty contacts. Rip the starter off, dismantle, clean up contacts and inspect winding. It might not be possible to see if there is a short in the winding though. I have a spare starter here that I could measure the resistance of the coil, as a guide to about what it should be, if you need a comparison. <parts hoarder>No you cannot have it.</parts hoarder>
×
×
  • Create New...