Jump to content
SAU Community

Recommended Posts

Hey All,

I have an r33 gtst s1 - recently I've put on a new 3076 turbo with a 4inch intake pipe. I have yet to get injectors + fuel pump so I've just been putting around. Anyhow was driving home when I had an issue with the crank angle sensor which has now been fixed..

The issue is ever since that happened I get a screeching type of sound that comes in and out (not sure but could be metal shavings) and everytime i come to a near stop the engine sounds like it is going to cut out although it doesn't

does anyone know what the issue may be here? or what that sound is?

Link to comment
https://www.sau.com.au/forums/topic/377133-engine-sounds-like-its-going-to-die/
Share on other sites

list your mods...

how did you expect a new larger turbo to go without getting other supporting mods?

and without getting it tuned?

please tell us you have a tuneable ECU or af control of some sort...???

i wasn't expecting it to "go" or planning on trying to do that without supporting mods.... injectors + fuel pump should be here within the week.

3' xforce exhaust

vipec v44

greddy fmic

gt3076

basically crank angle sensor went and had that fixed but ever since that there has been this winding sort of noise which hasn't gone away yet..

Did one of the washers for the CAS fall into the timing covers? Or anything else when you did the CAS?

Hard to say without seeing. This is just a guess as it's the last thing you touched before it went wrong

Nah I don't think so aye, also checked the belts and all that is sweet - while I was checking everything I noticed my exhaust was leaking though? it was leaking from the front so i lifted the car to make sure everything was tightened up and it was...

after turning the car over I had a closer listen and noticed the winding sound is actually coming from the exhaust, I just can't seem to find what the issue is and why it is leaking when everything is tightened.. I couldn't see any cracks either

i wasn't expecting it to "go" or planning on trying to do that without supporting mods.... injectors + fuel pump should be here within the week.

3' xforce exhaust

vipec v44

greddy fmic

gt3076

basically crank angle sensor went and had that fixed but ever since that there has been this winding sort of noise which hasn't gone away yet..

map sensor + turbo change + no tune = silly.

map sensor has no way of knowing airflow like an AFM system and a turbo change will throw the tune out.

are you asking, when you install a new turbo do you need to have it re-tuned?

- new ECU and you got it tuned everything fine

- new turbo and 4" intake & tune not adjusted

- CAS issue and now you have problems

is that the order in which things have happened??

Just trying to verify the steps along the way

I got a tune as soon as I got the ecu, I was able to take the airflow meter off and stick on 4 inch intake pipe because he had been mapped.. does it still throw that tune out because I've got a new turbo on there???

a map sensor relies on the overall setup staying within a small margin of difference, a different turbo is not a small change to the system. get your tune checked it could be massively out.

on my car the difference made by having it tuned with VCT off and turning VCT on in some points made what was 14:1 now 15-16:1 AFR.

yeah that is pretty much the order that it all happened..

I see so it leans it out alot...

thanks for the advice guys, i think i know what the issue is now and definitely the solution - ta. i'll let you guys know how it goes once it's all finished and whether or not I am still having the same issues

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Well, I can recommend the partial AV system translation CD I ordered from Car Audio Workshop in NZ. Whilst it didn't address the date issue, it has conveniently translated on-screen menu items into English, and now allows the GPS-received time to be offset in hours rather than minutes, so I can display Eastern Australian time accurately ( and bump it by another hour when daylight savings starts ).
    • Yuh, if it's 45°C outside, my car is driving in it.
    • I'd be curious to hear more. Otherwise, have you driven a modern x-trail? I wonder how it compares. Here in Australia they are/were popular for rentals and fleet vehicles. I have been in some and my impression was they are bad. But, this may have been very different in the 2000s at a good trim level. Twenty years is plenty of time to make the model worse. I do very much agree with the 2 silver cars in the garage approach. But, not driving because it's too hot would not leave a lot of time in the year for many Australians. I don't think you need to worry too much unless the car has actual issues with overheating. 
    • Back again. I returned to Japan in Jul/Aug to spend time with the car on my birthday and remind myself what all the sacrifice and compromise is for. It happened to line up with the monthly morning meet in Okutama, which I have been wanting to go to for a long time. It's a unique event at a unique spot with really rare, interesting, and quirky cars. It's where all the oldheads and OGs gather. The nighttime scene at DKF certainly has its place and should be experienced if you're into cars, but there's too much bad attention and negativity around it now. IMO the better time is Sunday morning at DKF or Okutama; it's more chill and relaxed. I'm glad I was finally able to go, but not sure it's worth the drive from all the way from Nagoya immediately the day before, unless I was already staying in Tokyo for the days right before the meet, because you have to wake up quite early to make it in time. Funnily enough though I didn't drive the car all that much this trip because it was just too damn hot. While there were zero issues and running temps were nominal and the A/C was strong, RBs already run crazy hot as it is. Sure, it took it all like a champ but something about driving these cars in the ridiculous heat/humidity bothers me and makes me feel like I'm asking too much of it. I'm just me being weird and treating the car like a living thing with feelings; I'm mechanically sympathetic to a fault. Instead I was mainly driving something else around - a KX4(silver) 2001 X-Trail GT, that I acquired in May. There's a few different flavors to choose from with Xs, but visually it's the Nissan version of the Honda CR-V. Mechanically it's a whole different story as this, being the top-trim GT, has an SR20VET mated to a four-speed auto and full-time AWD! It was a very affordable buy in exceptional condition inside and out, with very low mileage...only 48k kms. Most likely it was owned by an older person who kept it garaged and well-maintained, so I'm really happy with how it all worked out. It literally needs zero attention at the moment, albeit except for some minor visual touch-ups. I wanted something quirky, interesting, and practical and for sure it handily delivers on all three of those aspects. I was immediately able to utilize the cargo and passenger capacity to its full extent. It's a lot of fun to drive and is quite punchy through 1st and 2nd. It's very unassuming -in the twisty bits it's a lot more composed than one would think at a glance- and it'll be even better once I get better tires on it(yes, it's an SUV but still a little boat-y for my liking). So...now I have two golden-era Nissans in silver. One sports car and one that does everything else; the perfect two-car solution I think👍 The rest of the trip...I was able to turn my stressed brain off and enjoy it, although I didn't quite get to do as much as I thought. I did some interesting things, met some interesting people, and happened into some interesting situations however, that's all for another post though only if people really want to know. Project-wise, I went back to Mine's again to discuss more plans and am hoping to wrap that up real soon; keep watching this space if that interests you. Additionally, while working in the tormenting sweatbox that is the warehouse, I was able to organize most of the myriad of parts that my friend is storing for me along with the cars, and the 34 has a nice little spot carved out for it: And since it can get so stupid hot in there, that made it all the more easy -after I was standing there looking at the car and said 'f**k it'- to finally remove all the damn gauges that have mostly been an eyesore all this time. Huzzah. The heat basically makes the adhesive backing on the gauge mounts more pliable to work with, so it was far less stressful getting this done. I didn't fully clean it up or chase the wiring though; that will happen once I have the car in closer possession. Another major reason to remove all that stuff is to give people less reasons to get in my car and steal s**t while it's being exported/imported when/if the time comes, which leads us to my next point... ...and that is even though it's time in Japan is technically almost up since it's a November car and the X would be coming in March, I'm still not entirely sure where my life and career is headed; I don't really know what the future looks like and where I'm going to end up. I feel there's a great deal of uncertainty with me and as a result of that, it feels like I'm at a crossroads moreso now than any point in my life thus far and there are some choices I need to make. Yes, I've had some years to consider things and prepare myself, however too much has happened in that time to maintain confidence and everything feels so up in the air; tenuous one might say. Simply put, there's just too much nonsense going on right now from multiple vectors. Admittedly, I'm struggling to stay in the game and keep my eyes on the prize. So much so in fact, that very recently I came the closest I ever have before to calling it quits outright; selling everything and moving on and not looking back. The astute among you will pick up on key subtext within this paragraph. In the meantime I've still managed to slowly acquire some final bits for the car, but it feels nice knowing there's not much left to get and I'm almost across that finish line; I have almost everything I'll ever want for my interpretation and expression on what it is I think an R34 should be. 'til later.
    • Thanks for that, hadn’t used my brain enough to think about that. 
×
×
  • Create New...