Jump to content
SAU Community

Recommended Posts

Given the people involved, the diagnostics they have been resorting to and generally giving them credit I'd think (or hope) that its almost insulting to make these suggestions on the assumption they weren't the first points of call. It'd be very interesting to see a datalog file as the car warms up, however - if that were a possibility?

You would be suprised

Amount of fuel to flow out of the injector is dependant on the opening time(For this purpose we will ignore injector lag times) and fuel pressure.

The more fuel pressure the more fuel will flow at the same opening time(This is also discounting changes in manifold pressure)

If you have a faulty FPR it could make the fuelling go all over the place.

That said if injectors are not getting a constant good voltage source, injector opening times will change, this will change the amount of fuel being injected but wont nessesarly change the pulsewidth's especially if the ECU is not seeing the same voltage drop

not sure if this is relevant

..but when i got my car tuned originally I had never changed the fuel filter. Must of been dirty, then i changed it oneday giving it a serivce and all of a sudden was running very rich .first got told it was a boost leak ,I thought it was FPR busted cause I had hooked fuel lines up wrong at first, but it was just a filter that changed pressures and threw my whole tune out.. :/

Trent fixed it I dunno how ...had him stumped for a while too...

Since most things have already been pointed out, what about the grounding of the engine to chassis, etc. I know the BA Falcon's have an issue where they would run rich and even stall, all caused by the chassis/motor grounding being installed wrong.

Given the people involved, the diagnostics they have been resorting to and generally giving them credit I'd think (or hope) that its almost insulting to make these suggestions on the assumption they weren't the first points of call. It'd be very interesting to see a datalog file as the car warms up, however - if that were a possibility?

Well it basically has to be one of these things, how else does fuel magically get into the cylinder?

Tried another ECU that isn't a Haltech? I had a *very* similar issue along with some other "electrical gremlins" (intermittent misfiring and some other problems), the Haltech setup had been checked by many people whom could see nothing wrong with it - swapped it out for an Autronic ECU and the car has never run better.

Never did resolve the problems with the Haltech, as said many people had looked at it and said there was nothing wrong with the setup, it just would not work reliably in my car for whatever reason. Power FC had no problem, Autronic has no problem, Haltech had nothing but problems... *shrug* go figure.

Yeah this isn't the first time I've heard of nondiagnosable problems with a haltech, most people end up fixing it by using another ECU.

Might not be the ECU, might be some weird combination throwing it out, but sometimes its just cheaper and less time to try another ECU.

Yeah I was wondering about that too, ECU sounds like it CLAIMS its doing everything right - fuel pressure sounds right, something "lying" is the next most likely option.

yes sadly if you are paying a workshop $100-$150 an hour to diagnose a problem it can often be cheaper to switch to another ecu if the problem is specific to that brand ECU... considering you're likely to recoup 50-70% of what you paid for it the changeover cost to a new ECU may not be too bad.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • I dunno about that as a blanket statement. Pitwork is Nissan's "Nissan genuine" thing, and for stuff like timing belts, I have found them to be excellent. Of course, for things like oil filters, you always use proper trusted brands anyway, not whatever the OEM has taken to using.
    • Ahhhh... If you were putting 12V to the led in there, that's likely made it very unhappy. Chances are how you put power, was 12V across an LED that's meant to only have about 20mA through it at peak, and a forward voltage of about 1.8 to 2.4 volts. That circuit is likely only a 3V3 circuit, and will have a resistor in series with the led too. That's my guesstimate on that light, without having touched one.
    • Another vote for installing them and see how you go.  I mean, you already own them, why would you not fit them? 
    • I have had too many of those over the years, my cars have a toolkit or at minimum a cheapy multi tool thing because its too easy to be snookered by some stupid plastic clip that stops you checking the battery terminal isn't loose.
    • Basically, if there is a part# on the nissan catalogue, it is a genuine part. There is a thing called "new old stock" which is stuff made years ago but never sold (or landfilled), but it is super hit and miss what you can buy. Other than some expensive Nismo stuff there is nothing new being made that suits these cars. The only time to be a little careful is (mostly in the US I think, but maybe Japan too), Nissan started rebranding some cheap crap maintenance parts like oil filters as "Pitworks"; stay away from them, if you are buying cheap just buy whatever the local car parts shop carries The three part numbers have an explanation on Amayama: 0V005 is auto, base style 0V015 is manual 0V505 is auto, hectic momo branded ones, maximum F&F points there!
×
×
  • Create New...