Jump to content
SAU Community

Recommended Posts

Hey guys,

As the title states im chasing opinions from people who have/had HKS Hypermax coilovers in there GTR/GTS4, I have a 4door GTS4 and have found a set of barely used HKS Hypermax coilovers for a good price but just don't no to much about them. Any help would be awesome,

Thanks

Link to comment
https://www.sau.com.au/forums/topic/377646-opinions-on-hks-coilovers-for-gts4/
Share on other sites

If they are off a GTR there not going to fit, Your going to need a mixed set of GTR fronts and GTST rears.

you sure about that? I'm pretty sure fronts are identical between gtr & gtst & its the rears that are different...

Anyway for the op, I've got a z32 which use's identical suspension to the r32 gtr (& gts4 I believe) & I've had 2 sets of HKS's. The first were the Hiper-D's (as on label on coilover) these are the original hypermax's with progressive rate springs, 10/8, & I found them too harsh to daily round melbourne. Then moved to hypermax 2's (damper on label, mine are a gtr set) which run 7/6 springs, found these to be an excellent compromise. Compliant enough when your just cruising round the streets but offer great handling once your in the twisties.

They will "fit" but they won't "work". The front shocks are much shorter on the 4wd's due to the higher placement of the lower mount which is required to clear the front drive shafts. The front spring rate, and the damper rates, are too high for a 2wd due to the extra weight (~12%) that a 4wd carries over the front wheels.

BTW, you can't use a GTR kit either as their rear shocks have forks for the bottom mounts, not eyes like GTST's and GTS4's.

This is my understanding, but i happy to hear others opinions.

They will "fit" but they won't "work". The front shocks are much shorter on the 4wd's due to the higher placement of the lower mount which is required to clear the front drive shafts. The front spring rate, and the damper rates, are too high for a 2wd due to the extra weight (~12%) that a 4wd carries over the front wheels.

BTW, you can't use a GTR kit either as their rear shocks have forks for the bottom mounts, not eyes like GTST's and GTS4's.

This is my understanding, but i happy to hear others opinions.

Your getting confused mate, r32 gtr/gts4 & z32 all use the same shocks. Eye's at the front, forks at the rear & the same lengths between all models. Gtst uses eyes all round & may well be different lengths to the other types (I thought all fronts were the same though), doesn't matter though as op wants/needs a set for gtr/gts4/z32. He's trying to put gtr coilovers on a gts4, both are 4wd.

See this thread for comformation.

Edited by lidz

sydking. seriously dude what the hell? of course he can use GTR coil-overs on his R32 GTS4. there is no difference in length or mount or anything else you can come up with. I know you're trying to help but if you don't know don't post it.

R32 GTR and GTS4 have eyelet front lower mounts and fork type rear. front shocks are quite short on both models. they are completely interchangeable and even weight distribution and total weight of both cars is pretty similar.

any R32 GTR gear will fit fine on your R32 GTS4.

as far as HKS coil-overs go. they are ok. if you come across some in good condition with suitable springs and they are cheap then by all means use them, but I wouldn't go looking specifically for a pair for any of my cars.

sydking. seriously dude what the hell? of course he can use GTR coil-overs on his R32 GTS4. there is no difference in length or mount or anything else you can come up with. I know you're trying to help but if you don't know don't post it.

R32 GTR and GTS4 have eyelet front lower mounts and fork type rear. front shocks are quite short on both models. they are completely interchangeable and even weight distribution and total weight of both cars is pretty similar.

any R32 GTR gear will fit fine on your R32 GTS4.

as far as HKS coil-overs go. they are ok. if you come across some in good condition with suitable springs and they are cheap then by all means use them, but I wouldn't go looking specifically for a pair for any of my cars.

Thanks mate, The question i asked is were HKS are any good, not weather they were gunna fit. Sorry to offend but i already new they were gunna fit SYDKING confused the shit otta me lol

yeah I know, and to answer your question (as above) they are ok. not great but certainly not the worst options out there. but what you need to do is find out what spring rates come with the ones you are looking at and then decide if they are suitable for what you want to do with the car. like I said if these are cheap and in good condition then by all means use them, but if you actually want to find something good for your car start looking out for some bilsteins, Tein RA/RS, ohlins flag R, nismo R-tune etc. just depends on your budget and again what you want from the car.

if you just want some good basic road suspension with some height adjustment then look at a set of the circlip adjustable bilsteins. they are pretty decent for the money. can be converted to fully height adjustable with 'coil-over kits' later if you want.

32's must be only ones interchangeable, 33 are not, my source of info is from Sydney kid, so I think its reliable enough. I did a search in the topic and It's been covered before, and I dont see a problem with saying something wrong as the next person to read this will learn something new as infomation has been corrected, cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • jeebus. glad you weren't under it while performing the stunt. Also thanks for the link to the wheel measurer, exactly what I needed
    • In the older stuff there were very significant differences 2wd to 4wd, for example Stagea had strut front end for 2wd and double wishbone for 4wd so it was not minor to swap. From poking around the 2wd v37, it *looks* like it might be more possible; some of the parts specifically have "2wd" stamped on them which suggests the platforms are more similar. You'd still want to start with a 4wd half cut to swap stuff from though. I'd suggest if you don't have a tune on the ECU you don't really need one on the trans either. Throttle mapping is in the ECU side (and you can always use a Roar Pedal if you want the throttle to actually respond to your foot), and really if you are happy with the stock power you probably accept the stock trans behaviour too....its all made to be "sporty" not racey.
    • So, updates. I have not washed the car since it came back from Tassie. I've driven it around a bit but not got around to actually sorting it out. I DID raise it because I cracked the rear bar leaving a hotel which was very distressing. Interestingly, the car drives more compliant now that it's raised a fair bit (5mm front, 15mm rear). Also noticed that my FR height was 10mm lower than FL. So that's now sorted out, too. I also bought this and had it printed: https://www.etsy.com/au/listing/1576422240/wheel-and-tire-fitment-tool-universal?ref=shop_home_feat_1&dd=1&logging_key=08f604d9fa4cc383550ba985e6ac85cd5cac7fbb%3A1576422240 Now, if I was smart I would have taken my brake calipers off to actually use this correctly but it was evident enough to me that in the region where the caliper was... there was nothing to hit suspension/guard/arm wise. So I'm going with "it'll be fine" after using the tool to hopefully very precisely measure the wheel clearance. Also while doing this, I had the very VERY bad idea of jacking one of the wheels/suspension arms up while the rest of the car was on jack stands. I did this to see how the arm would travel. This all was well and good until the car slid off the stands and went through a fence. So don't do that. Incredibly nobody was hurt and there was only minor damage to the rear bumper as the car didn't have far to slide, and had 3-4 wheels on it. The only damage turned out to be the fence itself which was easy to fix, and a little bit of damage to the fibreglass rear bumper trim. I had already planned to try a touch up paint kit to fix the time I drove into my garage door to see if it'd help in the interim before I get it fixed properly. I used the Dr Colorchip kit after looking online and seeing everyone talking about it. Yes it's made for chips and not huge broken missing pieces and I'll be 500% recommending it for stone chips after using it for stupid things like me. This took about ... 10 minutes and looking at the half assed photo the 30 second job I did on the bumper corner was almost perfect just by using the tiny little brush and painting it in. The sealact stuff to remove over-painting is really useful, so if/when I do it again I'll likely slather the touch up paint well over it and then clean it up with the cleaning solution. The wheels should arrive in a couple of weeks. I am still kinda confident after doing a stupid amount of measuring (and borrowing a set of 18x10.5+15) that they will not fit because I overlooked something, somehow and flew too close to the sun. ALSO R34 GTR guard liners do not fit on a GTT. I bought the undertray brake duct guides and had the wonderful problem of them not fitting my intake, my oil cooler and the liners themselves were even worse. Attempting to fit them won't work in general - You would have to cut them up as another poster mentioned as the bodywork is different on the GTT. At least I can try to resell them. So instead of cutting those up, I cut up my old already-cut-up GTT liners and extended them by using some PP plastic and drilling some 8mm holes for some nissan clips for the 'extra' bit. Because I was happy to cut them I was able to mount them pretty damn forward so I now have some semblance of guard liners, and the brake vents seal the bumper from the bottom. It sort-of-looks like this, to give some idea - If you look at the GTR and then the GTT this is when I realised that I needed to seriously measure as the inside of the rim area is entirely, entirely, entirely different and could not take any internet measurements for granted.   
    • If you are Ecutek tuned then these TCU tunes are anywhere from $550 to $700 usd. If you are not ECUTEK tuned, then it gets costly!    
    • Sorry to hear your HFM BM57 was faulty,  did you contact HFM I would hope they would be at least grateful for the information if there was some sort of manufacturing fault, you would hope they would be sympathetic even if your item was 2 years old if it had never been fitted. May I ask where it leaked from ?
×
×
  • Create New...