Jump to content
SAU Community

Recommended Posts

Hey guys. decided i am going to downgrade a bit due to buying a house. Has been my dream car for years but cannot afford to keep it at the moment unfortunately. Not in a hurry to sell so am not interested ridiculous offers and please keep any negative comments to yourselves, thanks.

It is a black 5 speed manual '94 model, with just on 80,000 on the clock.

Car is almost completely standard, except for turbo back exhaust system with varex muffler and twin apexi pods.

Comes with 19" starcorps with heaps of dish on the rears. fit really well and show off the slotted rotors and calipers which have been painted red.

also has a heavy duty clutch installed by previous owner just before i bought the car.

It has had the standard series 6 rear spoiler removed and the holes are just plugged at the moment as i have a series 8 rear spoiler that i was going to put on but havent got into painted yet.

Interior is in good condition and the exterior is in pretty good condition for its age. Has a few minor marks, stonechips etc.

Like most cars of its age it has a few small problems which i dont have time to fix. These are:

- tacho works intermittently. apparently caused by a lose connection

- has a squeak coming from the rear of the car when you are on a bumpy road or going up a driveway. needs a rear swaybar bush to be changed to fix it.

- when you start the car after it has been sitting for several hours it has an alarm come on to say you need to add coolant. it only stays on for 30 seconds or so but i just find it a bit annoying. this is a common problem in this series rx-7 and is just an issue with a sensor.

- has a spot on the front bar where the paint is cracked so it needs to be resprayed

i have only owned the car for a bit over 6 months and have not used it very much at all. just short trips to and from work mainly. It is a great head turning car. sounds really tough and looks very tidy. it is also pretty quick for an almost stock car. would love to spend the time and money fixing up the problems but i would rather spend it on the house at the moment. As ive said price is negotiable due to the couple of small problems.

will ad pics tomorrow after ive given it a wash.

contact by pm on here or 0402630053 (prefer sms due to poor reception in our area)

car is located near Windsor, NSW

$17, 500 negotiable

Link to comment
https://www.sau.com.au/forums/topic/377681-fd-rx-7-series-6/
Share on other sites

few pictures i took today. can see on the front left corner of the car where the mark in the paint is.

forgot to mention. car is registered till june 2012.

brand new front tyres and good tread on rears..just had full service a couple of hundred k's ago

i will get the aircon re gassed as well before summer time.

cheers guys. message me if you have any questions.

post-71653-0-76927500-1316505987_thumb.jpg

post-71653-0-77012500-1316506026_thumb.jpg

post-71653-0-41487500-1316506055_thumb.jpg

post-71653-0-14749400-1316506081_thumb.jpg

post-71653-0-44775100-1316506288_thumb.jpg

post-71653-0-95951400-1316506317_thumb.jpg

post-71653-0-51006000-1316506339_thumb.jpg

  • 2 weeks later...

update

put the car into the mechanic the other day and got the spark plugs changed, running really well now

the coolant alarm going off was found to be due to a very slow leak out of the water pump. not an urgent fix just requires it to be checked once a week or so.

will take this into account if negotiating price if it is not yet fitted with a new one at time of sale.

i go away next week so best contact will probably be by email if you have any question

[email protected]

cheers guys, had several offers but not quite what im after

this badge only came out on the earlier fd models and only on the jap imported cars, the australian ones had the different badge like a number 8, same as on mx-6. and i think the series 7's and 8's started using the normal mazda badge

this badge only came out on the earlier fd models and only on the jap imported cars, the australian ones had the different badge like a number 8, same as on mx-6. and i think the series 7's and 8's started using the normal mazda badge

oh i see...hehe would u swap this car for a skyline??

nah not really open to trades at the moment. want to get something a bit more practical and cheaper to insure for the moment and im pretty picky with what i get so would prefer a straight cash sale.. i can definately see myself getting another r34 in the next 18 months or so though :D

make some offers guys, prefer local sale can willing to help organise interstate transport. i've found a car im after to tow the boat for summer so would like to sell this soon. cheers

  • 2 weeks later...

Hi Mate. Just wondering if you would be selling with RWCertificate and if that would be valid in Victoria. If no RWCertificate, then can you tell me exactly what is required for Road Worthy. Maybe scan a certificate from an Authorised mechanic? I am just guessing because we can do that in Victoria. Not sure about NSW. Thanks! :)

hey mate, i havent organised a road worthy cert for it. im not exactly sure what you would need for it in victoria. it would need the horn fixed, one of the headlight motors is a bit sticky sometimes, so they might not like that, and depends what their take on pod filters and loudish exhaust are. the pods and exhaust are the only mods, but im not sure of victorian rules on those thing. cheers mate.

price drop 15, 500 as is pretty firm

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...