Jump to content
SAU Community

Recommended Posts

BNR32 GT-R in Midnight Purple 1992

I'm finally selling my very tidy GTR.

I've owned it for almost 3 years and it's never missed a beat!

I've always taken the best care of it. Washed it every weekend and polished it regularly.

I've always maintained it even though it hardly gets driven.

It's been serviced every 5000kms with motul 300v. The brakes get bled every 6 months with rbf600. I used redline shockproof gear oil for the gearbox and genuine Nissan matic D for the transfer case. The spark plugs, coolant and air filters were all done less than 2 months ago.

As for its modifcations, they were all done by me. I took ownership of it 1 month after it arrived in Aus.

Mods include:

Engine:

Oil Filter Relocation kit, using speedflow fittings.

3 inch kakimoto exhaust with HKS front pipes and high flow cat

HKS Mushroom air filters

Makes a VERY safe 190awkw @ 14psi

Suspension:

Replaced front lower balljoints

Replaced rear tie rods.

ohlins suspension

adjustable front camber arms

tein castor rods

alloy rear subframe locators

front gtr strut brace

brake master cylinder stopper

Electronics/Interior:

Perfect condition R34 GTR seats

Greedy Profec B boost controller

Apexi EL2 system meter gauges in carbon gauge pod.

Remote central locking

ECU talk

Nismo Gear knob

JVC DVD/MP3/USB headunit

Body:

Genunie Nismo N1 front bumper

Type M rear pods

LED tail lights.

Wheels/rubber

RPF1s

Brand new Toyo proxes 4 front

falken azenis rt615 rear

Im after 18,000 ono

Contact me on 0413257569.

Located in the Hills District.

Cheers

Luke

Pics.

IMG_4163.jpg

IMG_4165.jpg

IMG_4166.jpg

IMG_4150.jpg

IMG_4148.jpg

IMG_4155.jpg

Link to comment
https://www.sau.com.au/forums/topic/377802-midnight-purple-r32-gtr-syd/
Share on other sites

Know this car well, driven in it many times, driven it many times and I can vouch for how meticulous it is.

If I had any desire to own an R32 GTR it would never have gone up for sale in the first place. Buyer will NOT be dissapointed!

Sad to see it go Luke...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...