Jump to content
SAU Community

"GOLGO" The GT-R .. is something wrong with her ?

LaL

By LaL,
in General Automotive Discussion

 Share

Recommended Posts

Guest INASNT

Guest INASNT

Posted
Posted
Hello,

I have noticed the Car "GOLGO" R33 GT-R Midnight Purple in colour is really weak.

It ran 13.3 Down calder a long time ago.. and now on the Dyno only powering 180KW!!! .. i just wanna know is this normal or totaly stuffed up ?

thanks mate

Golgo is tuned to blow flames out the exhaust. :D

LaL Rising Star

LaL

Posted
  • Author
Posted

dave : i wasnt being a dhead.. i just wanted to know what modifications he had.. as in Exhaust and stuff.. most GT-R's pull just under 200 KW with a full exhaust.. GOLGO was just not all so good for the crown.. even James went red after he saw the results..

Thanks dAve :D

T0nyGTSt Grand Master

T0nyGTSt

Posted
Posted
if its stock theres nothing wrong with 13.3, thats all mine did stock, but that was a 8000rpm launch too and not everyone likes to launch it at redline, 180kw at the wheels prob sounds about right too?

13.3 is about avg. for a soft launch and avg. reaction/60ft times.

Something well into the 12's is possible.

180awkW is also avg. for a stockish RB26.

T.

predator Grand Master

predator

Posted
Posted

golgo isn't designed to be a rocket, just a nice machine all round, as I'm sure James would agree :D

With 200rwkw a low 13 or high 12sec bracket is about average for a 33GTR. Its the ATTESSA that makes it grip nicely and get the better times than the 33GTS-T

Leewah Veteran

Leewah

Posted
Posted

There is nothing wrong with GOLGO. Golgo is a stock R33 GTR with exhaust and that's it. The car's O2 sensors are pretty far gone and hence it is running rich and therefore makes a better flame thrower than a race car. The 13.3 was done with a slipping clutch so it is capable of doing a high 12 which is right for a stock GTR.

The 180awkw is an accurate figure of what the car should be making with the limited mods and tuning.

It is going to be worked on by ICE in the near future so things should pick up soon :rofl:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • bilbo117
      R34 GTR Seats / No longer reclining

      By bilbo117 · Posted

      Hi all, Long time since I've posted here. Looking for some advice on what I can remove to further identify the cause of my issues.  I can move the passenger seat forward and back but the knob used to adjust the seat angle is pretty much free spinning, there's very little resistance.  Removing the side cover I can see that the chain is intact but the shaft for the adjustment spins without the gear attached to it moving.  What's my next step for disassembly here? Is this a common fault? Just being a little cautious as I didn't want to start removing bolts for a spring to fly out or something equally as stupid.  Cheers
    • Dose Pipe Sutututu
      Ethanol Content Sensor - Always at 11%?

      By Dose Pipe Sutututu · Posted

      Those above shitboxes, mediocre and above usually have a turbo strapped to them, hence the slightly higher octane is required.  
    • sinn3r
      R34 Skyline climate control unit transistor

      By sinn3r · Posted

      Hi all,   long time listener, first time caller   i was wondering if anyone can help me identify a transistor on the climate control unit board that decided to fry itself   I've circled it in the attached photo   any help would be appreciated
    • Kinkstaah
      Blue slip

      By Kinkstaah · Posted

      I mean, I got two VASS engineers to refuse to cert my own coilovers stating those very laws. Appendix B makes it pretty clear what it considers 'Variable Suspension' to be. In my lived experience they can't certify something that isn't actually in the list as something that requires certification. In the VASS engineering checklist they have to complete (LS3/NCOP11) and sign on there is nothing there. All the references inside NCOP11 state that if it's variable by the driver that height needs to maintain 100mm while the car is in motion. It states the car is lowered lowering blocks and other types of things are acceptable. Dialling out a shock is about as 'user adjustable' as changing any other suspension component lol. I wanted to have it signed off to dissuade HWP and RWC testers to state the suspension is legal to avoid having this discussion with them. The real problem is that Police and RWC/Pink/Blue slip people will say it needs engineering, and the engineers will state it doesn't need engineering. It is hugely irritating when aforementioned people get all "i know the rules mate feck off" when they don't, and the actual engineers are pleasant as all hell and do know the rules. Cars failing RWC for things that aren't listed in the RWC requirements is another thing here entirely!
    • GTSBoy
      Best place to order Authetic R32 Parts in Japan

      By GTSBoy · Posted

      I don't. I mean, mine's not a GTR, but it is a 32 with a lot of GTR stuff on it. But regardless, I typically buy from local suppliers. Getting stuff from Japan is seldom worth the pain. Buying from RHDJapan usually ends up in the final total of your basket being about double what you thought it would be, after all the bullshit fees and such are added on.
×
×
  • Create New...