Jump to content
SAU Community

Recommended Posts

hi guys ive recently been off this site for about six months when i started the same topic,

long story short lost internet and could'nt return any emails of interest in the topic,

OK selling all parts

please call 0478077969 if interested

postage may be a problem as i dont get much time of work

located strathpine 4500

interior good conddition

rb20 det

r33 s2 turbo

gearbox very good

120xxx approx genuine k's

fmic

ask for a part and ill see if i have it

thanks, nathyn

Link to comment
https://www.sau.com.au/forums/topic/378047-stripping-r32-gts4/
Share on other sites

I take it that it's a coupe?

Can you give me a price (if you have them) for

Passenger side vent,

Centre dash surround and fascia (The bit the gauges and A/C bolt to and the bit that goes over the top),

Standard front speaker pods,

Dash (provided it doesn't have any bubbles or screw holes),

Cluster surround (the bit that goes around the cluster and has the lights and wipers on it),

Coolant overflow bottle lid,

Drivers A pillar (no holes please),

B/C pillar trims (The plastics that go around the top of the 3/4 window).

I'm Brisbane north-side, so if you get back to me quickly, I can come around with cash and inspect.

Edited by Sciclone

if this is a coupe I want the rear inner cover for the fuel filler neck.

would like to talk to you at some point. I'm nthside as well.



  • Similar Content

  • Latest Posts

    • Just don't use ChatGPT or any other artificial stupidity for the equivalent of googling. Their demonstrated inability to discriminate reality from hallucination should be enough to make them totally untrusted. LLMs don't know anything and cannot think to even the smallest extent. They are just predictors of the next word, and that should never be confused with capability.
    • I think, given the usage model described in the OP, I'd never ever experience the wonders of the 400kW upgrade. What I really need is boost from 2000rpm and probably no more than 260-270rwkW. But I suspect that the highflow is not actually the turbo for that purpose, so I may in fact need to get a G25 or 30 or something right sized and very spooly. We shall see after it is tuned. I've had to back the boost and boost ramp off to stop the thing from pinging since the highflow went on, so I've been almost living the NA life for 9 months now! Injectors are recently in hand. AFM is in hand. Dyno is fixed. Just need to clear a queue of f**king Supras out of the way (and probably fit my new gearbox). So....some time this year? Lol.
    • For what I gather is a Sunday/summer car....braided is fine. You're not going to be left without a vehicle and you have plenty of time for inspection/maintenance. Oof. I wouldn't use them that way. They can probably handle the temperature** but the internal corrugations means that their flow characteristics are a bit shit. Lots of extra friction and pressure loss. Makes them flow like the next pipe size down. ** They are stainless, and the stainless can usually be at least something like 304L, which is pretty good at higher temperatures (unlike 316L, which I would use for a wrt/corrosive environment, but not a particularly hot environment). But the welding needs to be top notch. And even then, because you usually need at least one cone-seat end on them (because you can twist the hose and do up both ends at the same time unless one of them is a union) they can be prone to coming loose with heat cycles.
    • I don't have the OEM oil feed lines though and the turbo-wraparound line is torn, only has water. My plan is to get replacements for these and just connect a braided line to there. And make sure it's leak free. Hoses like these are also sometimes used to connect external wastegates, so for an EGR I think you're good using them.
    • Alright I understand. The most likely case is probably gonna be that I just keep the OEM unit in the car as long as it works.
×
×
  • Create New...