Jump to content
SAU Community

Recommended Posts

Hey Guys,

Anyone had this problem and fixed it?

If so, could you please let me know?

Leaking from near top of unit, so it seems and only occasionally - then the the brake master fluid drops and the red hand brake indicator lights while cornering.

- reason for leak? O-rings failing, etc?

- any seal kits available?

- anything else one needs to know?

Regards ... Les Melbourne . . .

Link to comment
https://www.sau.com.au/forums/topic/378111-r32-gtr-leaking-abs-unit/
Share on other sites

if you are brave you can pull it apart and then source replacement seals and 0-rings for it. just keep everything super clean, take lots of pics/drawings and don't lose anything! a good seal place will be able to match most if not all the o-rings in it.

if you are brave you can pull it apart and then source replacement seals and 0-rings for it. just keep everything super clean, take lots of pics/drawings and don't lose anything! a good seal place will be able to match most if not all the o-rings in it.

BB have you confirmed this can really be done? It was rumored for a while, but all the seals are non-circular cross-section so generic seals wont do. I tried and failed with the EDPM o ring list that was posted on this forum....haven't heard anyone confirm they succeeded. If the proper seals could be found it should be possible but no-one seems to have found them.

BB have you confirmed this can really be done? It was rumored for a while, but all the seals are non-circular cross-section so generic seals wont do. I tried and failed with the EDPM o ring list that was posted on this forum....haven't heard anyone confirm they succeeded. If the proper seals could be found it should be possible but no-one seems to have found them.

have not done it to any of mine (never needed to) but yes I know of a bloke who did it. I think there are even pics floating around on this forum somewhere.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • If it (the code) wasn't still current, it should have gone away by itself by now. No, nothing it 10/10. But it is quite likely. Everything else to do with the ignition could still be responsible (which is wires and connectors). The car is an old piece of shit now, so all the wires and connectors are also old pieces of shit.
    • Lock me in mate, although I'm not sure if I'll be heading up from Goulburn or down from Sydney, either way, return will be back to Goulburn 
    • Sounds good, we will aim to be there! @The Bogan I'll give you a shout if you are heading up to campbelltown for the meet too.
    • Before I get to the test day, just to finish off the android head unit. This is a demo from car start up....the standard/host system takes a few seconds to boot (same as all v37) but Android comes up quickly. In this vid I'm using the delivered launcher but have set the default to Agami since which is easier to navigate when if use primarily 5 apps. You can see the host system still takes over when required eg putting it in reverse, and you can switch between Android and not by holding the back button 3 sec. It is pretty responsive (fast) but you can see I had to press harder than expected a couple of times.  I still have the phone connected to the stock system, and that also seamlessly takes over Android music playing. v37-android-demo.mp4 The bigger reason that I put this in though is so that I can use Ecutek directly on the head unit. That gives me a dash with logging (up to 20MB only), high and low value warnings on any parameter etc etc. I've run a USB cable from the Ecutek OBD dongle to a USB input on the unit, easy. v37-ecutek-demo.mp4   The unit did freeze on the launcher the other day, I think Agami was trying to verify the license when it didn't have a data connection...will monitor and report back if there are any other problems but so far I'm very happy with the upgrade.
    • Nah that is just crappy GPS mapping, I did have a small excursion (cold tyres, damp track, surprise!), will post up that when I get a chance.
×
×
  • Create New...