Jump to content
SAU Community

Recommended Posts

this may help you guys, I have found the bracket for using non-GTR headlights for a GTR grille:

Clips part numbers as below

;)

N1_brackets.jpg

bracket_assembly_for_GTR_grille.jpg

oh noes! someone's revealed the secret to converting poverty pack headlights to "OMG N1 headlights!!1!".

Hint hint nudge nudge. Don't be a sheep.

  • 2 weeks later...
  • Replies 99
  • Created
  • Last Reply

Top Posters In This Topic

OK, after doing a shitload of research it turns out there are 2 different types of "Square" headlights. As funkymonkey mentioned... one which has the larger square going behind the smaller square and one which clearly doesn't.

Now, the thing is, the one which Shan thought was the N1 is not the N1, actually it's found on the GTS-S! There are plenty of the both up on Yahoo Auctions right now. Some are calling N1, some aren't. And so, it brings us all the way round to square 1 again.

It's looking a lot like this:

THERE IS NO DIFFERENCE!!!

Just the clips above which allows you to bolt up GTS square non projector lights to a GT-R and keep your grill.

  • 1 year later...

Sorry to bring up an old tread, but I forgot what the nissan part number is for the R32 headlight brackets to fit the GTR grill, I bought some ages ago but can't remember them and the picture that showed the part number before has been removed.

Hope someone can rememeber.

cheers

michael

Sorry to bring up an old tread, but I forgot what the nissan part number is for the R32 headlight brackets to fit the GTR grill, I bought some ages ago but can't remember them and the picture that showed the part number before has been removed.

Try asking in the "VINs you want FASTed" thread, use a random R32 GTR VIN like "BNR32 003945" and get em to look up the part number for the headlight bracket. I'd look it up for you, but I just reinstalled XP on my machine and have to install FAST again.

Does anyone know where to get a set of DOT approved headlights? Or a set that say DOT on them?

Skylines never came with DOT approved headlights. If you want to be cheeky, try getting a DOT approval etched on your headlight (illegal, but meh) back in the day in Australia before the compliance laws got relaxed, the rear quarter windows on some R32's weren't ADR (our version of DOT) approved, so some compliance workshops used to get a fake approval etched onto it, and then put it thru the system just fine.

You'll still get caught out on the road because your headlight will glare into oncoming traffic, but at least your inspection will be OK.

Failing that I've seen people use S14 and Accord headlights on their R32's in Canada hehehe... looks like arse, but if you want one badly and want to stay legal, thems the breaks. Or be a pioneer and put a 240SX front (pop up, not the JDM tyte silvia one) on your skyline :)

Failing that I've seen people use S14 and Accord headlights on their R32's in Canada hehehe... looks like arse, but if you want one badly and want to stay legal, thems the breaks. Or be a pioneer and put a 240SX front (pop up, not the JDM tyte silvia one) on your skyline :nyaanyaa:

These would look a little less then arse on a black car with dark tint.

http://cgi.ebay.com/ebaymotors/94-95-96-97...1QQcmdZViewItem

But it sucks you need to replace the stock headlights because they look so damn good. The only good thing with all our stupid rules is that everyones car will look different and your hard pressed to find a skyline here thats legal but doesn't look tacky (looks like they shopped for their side markers at a trailer store).

As for the 240 front end, i'd rather have the front of my car moulded to a tree then have that.

what about european delivered R33 headlights? they're DOT approved. go on, do an R33 frontend swap on an R32. Then R33 owners AND R32 owners will hate on you :nyaanyaa:

So can anyone tell me what is so special about the n1 headlight? And why it costs a bomb when it looks like a gts-t headlight?

Especially considering the standard gtr headlights are projector?

I've got the supposedly n1 headlights on my car and ive always wondered whats so special about it :thumbsup:

Also, any confirmation on whether the full backing square headlight is the n1 or the square that half-fills the headlight is the n1?

Edited by Yawn
So can anyone tell me what is so special about the n1 headlight? And why it costs a bomb when it looks like a gts-t headlight?

Especially considering the standard gtr headlights are projector?

I've got the supposedly n1 headlights on my car and ive always wondered whats so special about it :thumbsup:

Also, any confirmation on whether the full backing square headlight is the n1 or the square that half-fills the headlight is the n1?

here's how I see it... N1's are a myth. Every single real N1 chassis I ahve seen features poverty pack headlights or projector headlights.

The reason for this? GTR's came with projector headlights. non GTR's came with non projector headlights and projectors as an option. An N1 GTR is a stripped down race version of the GTR (ie "race spec" brakes, tranny etc, but no creature comforts like stereo)... part of this de-optioning was putting non projector headlights on them. Now in order to fit a GTR grille, you needed a bracket that clipped onto the headlight.

So basically you get a bunch of guys who put brackets on poverty pack headlights, and run around saying they've got N1 headlights. When in fact they have the cheap headlights with a $30 bracket.

DOT R32 lighing kit

http://www.getjdmcars.com/catalog/index.ph...2f42d50ba932f6d

start lining up to spend $1000 on $200 of equipment. But get a cheap car from Japan add that to yuor costs and have a car that'll got hrough with no bull shit. I think i just need lighting because i looked at all the lines in my car and their all DOT allong with all the glass i soppose the last owner had to pass slacker laws because thatd be allot of bullshit to do everythign at once. I might as well order me a Caterham and a gt35R if i wanted to build an entire car from the ground up.

we don't need to meet DOT requirements in australia (partially cos we're not attached by the umbilical cord to America's arcane laws) but mostly because we drive on the same side of the road as the Japs and Brits.

Are you serious? they're gonna charge you a grand for a pair of shitty ebay Accord headlights and mods that you can do with a bit of silicon remover, pliers, electrical tape and a saw?

The only people who are gonna pay $1000 are the people who souldn't touch a tool. I think the only good thing about the laws in place is that it forces everyone into modifying their cars in some way and it'll be neat in the next few years to see how people make these restrictions, well not the lazy way but the really good looking clean setups.

  • 10 months later...

For N1 lights? The grill clips are

26025-05U15 Right H/S

26075-05U15 Left H/S

26042-05U15 is Bracket Assy (right)

26092-05U15 is Bracket Assy (left)

Get along to a dealer and have a look at the FAST exploded diagram to confirm its what your after.

For N1 lights? The grill clips are

26025-05U15 Right H/S

26075-05U15 Left H/S

26042-05U15 is Bracket Assy (right)

26092-05U15 is Bracket Assy (left)

Get along to a dealer and have a look at the FAST exploded diagram to confirm its what your after.

I'll do that or if someone has a FAST pic of the parts that would be good too. Need these brackets to allow my pov spec non projector lights accept the gtr grill.

I take it the over part numbers you mentioned are for the clips themselves?

see if you can make it out from this pic in my build thread:

msg-662-1209048273.jpg

Genuine JDM tyte nissan yo! they were $30 each plus shipping from japan. Pm Laurence who can organise it for ya.

  • 2 weeks later...

Ok these things are driving me up the wall, 4 mm wide screws dont fit, nissan doesn't stock the screws, and I don't really want to buy every single smaller type of screw to try and fit into these things, anyone else put these things in? And if so what screw sizes did you use?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...