Jump to content
SAU Community

Recommended Posts

Hey guys

My boyfriend and I just bought a 1989 r32 gtr Nismo edition with a fully rebuilt engine. Some engine specs are:

- N1 block

- r33 gtr crankshaft

-wiseco forged pistons

-h-beam conrods

- N1 oil pump

- nismo big end and main bearings

- tomei sump baffle

We took it out for a bit of a run today and had to get it towed home by the end of it. We booted it a bit down the straight and wouldn't have even reached 200kms, revved it, and then downshifted to 3rd gear when we heard a knocking noise coming from the engine. We pulled over into a carpark for a look. There was no smoke, no leaks, no smells under the bonnet and the engine wasn't overly warm. There was just a clunking noise that seemed to follow the revs. Turned it off for about 45mins and then turned it back on to find that we had lost oil pressure to the point that the warning light was coming on. Decided that we should try and drive it to see if the oil pressure light would go off and the engine seemed fine. It turned over as normal, wasn't overheating, still had all of it's power but there was still the knocking noise. We checked the oil and it was normal, we also checked the coolant, checked to see if any carbon crap was being blown out of the exhaust and all was normal.

We have read a lot about rb26's and the oil problems that arise with older models however seeing as this is a fully rebuilt rb with a N1 block that has only done roughly 25000 kms we never expected to run into the dreaded rb26 oil problem in such a short space of time without even pushing the engine.

The fact that we lost oil pressure isn't a good sign and we are hoping that we haven't spun a bearing. What else could it be? Rod knock? Destroyed oil pump crank collar? A bad tune?

We are going to drain the oil tomorrow morning and hope like hell that there are no metal shavings/bits floating around that would mean a complete engine rebuild so soon.

Any ideas? Has anyone else come across anything similar?

Thanks guys for any advice!

There won't be a crank colar, R33 GTR crankshaft has a long oil drive.

Was the sump overfilled? (in most likely hood: oil starvation. N1 pumps will fill the head faster than a stock pump, without a sump extension or oil restrictors or overfilling to 6l. By the time you reach the end of a straight the sump will be bone dry)

How old was the oil pump? (recently made as in 2 years ago, the N1's have a bad reputation, older pumps were fine)

What oil did you use at the track?

Do you have an oil/air seperator or aftermarket cam baffle plates to return blowby oil to the sump instead of back into the intake and out the exhaust?

There won't be a crank colar, R33 GTR crankshaft has a long oil drive.

Was the sump overfilled? (in most likely hood: oil starvation. N1 pumps will fill the head faster than a stock pump, without a sump extension or oil restrictors or overfilling to 6l. By the time you reach the end of a straight the sump will be bone dry)

How old was the oil pump? (recently made as in 2 years ago, the N1's have a bad reputation, older pumps were fine)

What oil did you use at the track?

Do you have an oil/air seperator or aftermarket cam baffle plates to return blowby oil to the sump instead of back into the intake and out the exhaust?

The sump was overfilled when we checked. The N1 pump was a 2009 model and I have read that N1 pumps aren't the greatest but better than stock. The car doesn't have cam baffles or an extended sump. Don't think the previous owner really drove it much as it has pretty much been a weekender for him mostly living in the garage.

The more we read into it, it sounds like the oil pump is destroyed. Better than a spun bearing though I guess. Only time will tell, we'll find out tomorrow!

What pump do you recommend? And other than putting cam baffles in and an extended sump, are there any other improvements that we can make to lessen the chance of something like this happening again?

Really appreciate the response :)

DVS JEZ: That thought has definitely crossed my mind.

smithy85: Yeah its got the 2 lines coming out the top/back of the engine leading into a catch can where the battery used to be

Cheers for the replies guys

Not the drains from the breathers.

Rather drains drilled into the back of the head that drain directly into the sump - stops the oil pump from getting carried away with itself and pumping more oil up to the head than the head can drain back, leading to oil starvation.

Do a search on here for the oil control thread, heaps of info on it.

Not the drains from the breathers.

Rather drains drilled into the back of the head that drain directly into the sump - stops the oil pump from getting carried away with itself and pumping more oil up to the head than the head can drain back, leading to oil starvation.

Do a search on here for the oil control thread, heaps of info on it.

It has drains in the back of the head with lines that go straight back into the drivers side of the sump.

Drained the oil out of the sump last night and couldn't see any signs of metal in the oil so am now just confused even more.

I was under the impression that generally when rb26's lose oil pressure and develop a knock they dump almost all the oil out into the engine bay. Ours has no signs of oil being anywhere that it shouldnt be. The sump was full after it lost oil pressure, the catch can isnt full, theres no oil leaks anywhere.

As you can imagine we have a million and one questions going through our heads at the moment and are just really confused lol.

We know that the only real way to find out for sure is to get it into a workshop to get checked out but any other ideas you guys might have would be greatly sppreciated!

Cheers,

Drew

Hi Drew,

Sorry to hear about your engine dramas. I've blown up more than my fair share of them (Usually late model Toyota ones, and in exactly the same fashion), so I know how you're feeling right now.

Going from what you've described, it sounds like an oil pump failure. There's plenty of oil in the sump, but no oil pressure. So the pump is not sending oil through the engine. When you're at the high rev range of the engine, it gets really hot, and without any oil, the bearings will fail.

That knocking sound is a spun big end bearing, which is basically a bit of metal between the crank and the piston. That knocking sound is the sound of the piston hitting on something, and as revs increase, your crank turns faster, and the bearing hits on whatever faster.

It's very unfortunate to have happened, but hopefully there's no damage on the block, and you can just replace the bearings and go at it again. If there's no metal in the oil, then it's a good sign. You'll need to have the engine professionally checked out to be sure anyway.

Good luck mate, and PM if you want to talk more about it. Happy to chat over the phone.

Tiang

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...