Jump to content
SAU Community

Serious Turbo Knowledge Needed

Samuel Leonard
 Share

Recommended Posts

Samuel Leonard Rising Star

Samuel Leonard

Posted
Posted

i have pulled my r32 gtr turbos out.

i am trying to learn much more indepth about turbos.

i have measured my compressor inducer and my turbine exducer and worked out they are a t25 turbo with a 42mm compressor inducer and 41.7mm exducer on the turbine.

this means that my compressor should be a 54.4mm exducer and turbine should be a 53mm inducer. does that mean they are t2560r turbos? because that's what www.ztechz.net/id1.html suggests all the sizes are but i thought it should mean they'd be a t25 54.4R because the compressor exducer is 54.4? where have i gone wrong or do they just classify it a 2560? because there's no reference on the net to a t2554 or t2555? i'm trying so hard to get my head around it all.

any help from someone in the know would be great!

cheers, sam.

Link to comment
https://www.sau.com.au/forums/topic/379132-serious-turbo-knowledge-needed/
Share on other sites
Samuel Leonard Rising Star

Samuel Leonard

Posted
  • Author
Posted

Tag numbers on the center cartridge will tell you exactly what they are.

already looked. no tag??? they've been rebuilt with 360 degree thrust bearings and a steel exhaust wheel in 04.

R31Nismoid Grand Master

R31Nismoid

Posted
Posted

Nope.

The Garrett link is a ball bearing unit, going by what you said - you have journal bearing items.

Sounds like your turbo's just have had steel wheels and a rebuild kit put through the original cartridge or similar rather than the ball bearing Garrett replacement.

Samuel Leonard Rising Star

Samuel Leonard

Posted
  • Author
Posted

Nope.

The Garrett link is a ball bearing unit, going by what you said - you have journal bearing items.

Sounds like your turbo's just have had steel wheels and a rebuild kit put through the original cartridge or similar rather than the ball bearing Garrett replacement.

is this bad? it cost the last owner $2600 i have receipts. i think that you might be right. so it's a copy of the t2554r's but it's not genuine items?

R31Nismoid Grand Master

R31Nismoid

Posted
Posted

could have had the factory compressor housings machined and fitted to GT2554 cores. without an ID plate we're just guessing though.

Agreed!

Although if the invoice on it clearly states "journal bearing", then even without a ID plate we know they aint a ball bearing Garrett core.

is this bad? it cost the last owner $2600 i have receipts. i think that you might be right. so it's a copy of the t2554r's but it's not genuine items?

Do the housings look machined?

Back in 2004 that might have been a 'ok' price, I can't remember exactly when Garrett items of various series came out. I know you couldn't get a "-9" (same as HKS GT-SS) until around 05/06 if memory serves me correct for instance.

Either way now you can pick up such turbos for around $1200ea new. Journal bearing items, 2nd hand, maybe worth $800 for the pair.

Not saying they aren't genuine, just that they are not a ball bearing core.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • 677_GTR
      R33 GTR running -9 with no tune

      By 677_GTR · Posted

      Thanks for all the replies fellas. Gonna finish putting it back together and see how it handles the set up. If it starts pinging it’ll be parked.
    • suko
      J50 clock date suddenly reset to January 1

      By suko · Posted

      Well, I can recommend the partial AV system translation CD I ordered from Car Audio Workshop in NZ. Whilst it didn't address the date issue, it has conveniently translated on-screen menu items into English, and now allows the GPS-received time to be offset in hours rather than minutes, so I can display Eastern Australian time accurately ( and bump it by another hour when daylight savings starts ).
    • GTSBoy
      Baron's R34 GT-R build thread - car in Japan for 5 years -_-

      By GTSBoy · Posted

      Yuh, if it's 45°C outside, my car is driving in it.
    • soviet_merlin
      Baron's R34 GT-R build thread - car in Japan for 5 years -_-

      By soviet_merlin · Posted

      I'd be curious to hear more. Otherwise, have you driven a modern x-trail? I wonder how it compares. Here in Australia they are/were popular for rentals and fleet vehicles. I have been in some and my impression was they are bad. But, this may have been very different in the 2000s at a good trim level. Twenty years is plenty of time to make the model worse. I do very much agree with the 2 silver cars in the garage approach. But, not driving because it's too hot would not leave a lot of time in the year for many Australians. I don't think you need to worry too much unless the car has actual issues with overheating. 
    • BaronOBeefdip
      Baron's R34 GT-R build thread - car in Japan for 5 years -_-

      By BaronOBeefdip · Posted

      Back again. I returned to Japan in Jul/Aug to spend time with the car on my birthday and remind myself what all the sacrifice and compromise is for. It happened to line up with the monthly morning meet in Okutama, which I have been wanting to go to for a long time. It's a unique event at a unique spot with really rare, interesting, and quirky cars. It's where all the oldheads and OGs gather. The nighttime scene at DKF certainly has its place and should be experienced if you're into cars, but there's too much bad attention and negativity around it now. IMO the better time is Sunday morning at DKF or Okutama; it's more chill and relaxed. I'm glad I was finally able to go, but not sure it's worth the drive from all the way from Nagoya immediately the day before, unless I was already staying in Tokyo for the days right before the meet, because you have to wake up quite early to make it in time. Funnily enough though I didn't drive the car all that much this trip because it was just too damn hot. While there were zero issues and running temps were nominal and the A/C was strong, RBs already run crazy hot as it is. Sure, it took it all like a champ but something about driving these cars in the ridiculous heat/humidity bothers me and makes me feel like I'm asking too much of it. I'm just me being weird and treating the car like a living thing with feelings; I'm mechanically sympathetic to a fault. Instead I was mainly driving something else around - a KX4(silver) 2001 X-Trail GT, that I acquired in May. There's a few different flavors to choose from with Xs, but visually it's the Nissan version of the Honda CR-V. Mechanically it's a whole different story as this, being the top-trim GT, has an SR20VET mated to a four-speed auto and full-time AWD! It was a very affordable buy in exceptional condition inside and out, with very low mileage...only 48k kms. Most likely it was owned by an older person who kept it garaged and well-maintained, so I'm really happy with how it all worked out. It literally needs zero attention at the moment, albeit except for some minor visual touch-ups. I wanted something quirky, interesting, and practical and for sure it handily delivers on all three of those aspects. I was immediately able to utilize the cargo and passenger capacity to its full extent. It's a lot of fun to drive and is quite punchy through 1st and 2nd. It's very unassuming -in the twisty bits it's a lot more composed than one would think at a glance- and it'll be even better once I get better tires on it(yes, it's an SUV but still a little boat-y for my liking). So...now I have two golden-era Nissans in silver. One sports car and one that does everything else; the perfect two-car solution I think👍 The rest of the trip...I was able to turn my stressed brain off and enjoy it, although I didn't quite get to do as much as I thought. I did some interesting things, met some interesting people, and happened into some interesting situations however, that's all for another post though only if people really want to know. Project-wise, I went back to Mine's again to discuss more plans and am hoping to wrap that up real soon; keep watching this space if that interests you. Additionally, while working in the tormenting sweatbox that is the warehouse, I was able to organize most of the myriad of parts that my friend is storing for me along with the cars, and the 34 has a nice little spot carved out for it: And since it can get so stupid hot in there, that made it all the more easy -after I was standing there looking at the car and said 'f**k it'- to finally remove all the damn gauges that have mostly been an eyesore all this time. Huzzah. The heat basically makes the adhesive backing on the gauge mounts more pliable to work with, so it was far less stressful getting this done. I didn't fully clean it up or chase the wiring though; that will happen once I have the car in closer possession. Another major reason to remove all that stuff is to give people less reasons to get in my car and steal s**t while it's being exported/imported when/if the time comes, which leads us to my next point... ...and that is even though it's time in Japan is technically almost up since it's a November car and the X would be coming in March, I'm still not entirely sure where my life and career is headed; I don't really know what the future looks like and where I'm going to end up. I feel there's a great deal of uncertainty with me and as a result of that, it feels like I'm at a crossroads moreso now than any point in my life thus far and there are some choices I need to make. Yes, I've had some years to consider things and prepare myself, however too much has happened in that time to maintain confidence and everything feels so up in the air; tenuous one might say. Simply put, there's just too much nonsense going on right now from multiple vectors. Admittedly, I'm struggling to stay in the game and keep my eyes on the prize. So much so in fact, that very recently I came the closest I ever have before to calling it quits outright; selling everything and moving on and not looking back. The astute among you will pick up on key subtext within this paragraph. In the meantime I've still managed to slowly acquire some final bits for the car, but it feels nice knowing there's not much left to get and I'm almost across that finish line; I have almost everything I'll ever want for my interpretation and expression on what it is I think an R34 should be. 'til later.
×
×
  • Create New...