Jump to content
SAU Community

Recommended Posts

Hi, my R34 GTR NUR engine is for sale

This engine was in my R32 GT-R and has done approximately 43,000kms. The engine was sourced as a brand new crate motor from Nissan Japan, and was given an extensive workover at Prime Garage including a host of brand new uprated parts and head porting before being installed into the car.

post-46-0-86089200-1318118030_thumb.jpg post-46-0-29019900-1318118037_thumb.jpg post-46-0-63263600-1318118043_thumb.jpg post-46-0-49159400-1318118055_thumb.jpg post-46-0-33590900-1318118062_thumb.jpg

Enhancements to the engine prior to installation include:

- Mild Head Porting to Prime Garage specification

- Brand New R34 GTR N1 Turbos with N1 Actuators

- Tomei Metal Gasket Kit Inc. 1.2mm Head Gasket

- Head Removed - Tolerances & Clearances Reset to Prime Garage specifications

- New R34 GTR Injectors

- New Injector Seal Kit

- New Oil Pressure Sensor

- New Genuine Nissan R34 GTR Coil Packs

- New Ignition Module (Over $500.00 on its own)

- New R33 GTR N1 Crank Balancer Pulley

- Various New Hoses & Clamps

- All New Studs & Pins

- R34 GTR Sump Removed & Replaced with BNR32 Sump (To Retain R32 Diff Ratios)

Additional Bolt-on Modifications Added:

- Tomei 76mm Stainless Dump Pipes (Yep, the BIG ones)

- Tomei Expreme Stainless Exhaust Manifolds

I will sell the engine as either a long motor, or as complete package with the Turbos, Tomei Dump pipes, Tomei Manifolds, Plenum etc. The Plenum, Turbo's and exhaust manifolds/dumps etc have been removed for inspection and a compression test has just been completed showing 165 Psi across all 6 cylinders, so it is in excellent condition - More pics will be available Saturday.

The engine and parts will be avaliable for inspection or purchase this Saturday (8/10) at Castle Hill for anyone that is interested.

Please note that one of the R34 N1 Turbo's may require a rebuild. (not sure but think one might need rebuild will know more on

I am asking $7500 firm for the complete package which is an absolute steal given a brand new R34 NUR Engine will set you back ~$20,000 in long bare form, and thats if you can actually find one!

Will list out some prices for individual items as well over the weekend.

Cheers!

post-22701-0-38854700-1317874618_thumb.jpg

is this beerbaron's motor?

No its mine , but yes i did buy the car from him and he had engine fitted in japan as package :thumbsup: also will not come with trust piping kit in pic but can come with the original piping and airbox or i can sell it seperately . original computer that was running this engine $100

For those that have asked or will , no the trust piping kit is not forsale . And wrrr has first choice on the dumps if no one wants the whole package ! THANKS

package price changed if dumps sold?

or still same?

thnx

yes it is 500 less now , so 7k the rest n1 engine with n1 oil and water pumps, plenum ,injectors ,manifolds,two n1 turbos(one only needs rebuild to be confirmed 2morrow) ect , ect , plenty of interest but first one in gets a bargain ! use what you want and sell what you dont , i just want it moved on and get into next project , as ive said if you want to come look tommorrow at it no problem . cheers , Aaron. ps: the engine is at my mechanics shop as i live on central coast , and i will be there at castle hill tomorrow :cheers:

Every thing you see here can go with the engine , ss tomei manifolds have some heat cracks in them but can be repaired and one of n1 turbos needs rebuild, i will also sell things seperately if any one wants anything ! Im open to offers as looking to sell quick as i have new project i want to get on with ! :)

p1030499if.jpg

Here is a short clip of the engine turning over with power to the starter motor.

The engine turns over freely without interference as verified by my mechanic:

Dumps sold and sent ! N1 turbos $300 pair , Injectors in rail $300 , Tomei manifolds $200 pair , R32 GT-R airbox $150 , R34 GT-R coilpacks $350 , Plenum $100 , Long engine as seen in video turning over $5500 , All plus post , :thanks:

All pms replied , first in best dressed , more pics of complete airbox set up , still has bit that is inside gaurd and all bolts , ect post-22701-0-23971900-1318328451_thumb.jpgpost-22701-0-05156200-1318328439_thumb.jpg :cheers:

All pms replied , first in best dressed , more pics of complete airbox set up , still has bit that is inside gaurd and all bolts , ect post-22701-0-23971900-1318328451_thumb.jpgpost-22701-0-05156200-1318328439_thumb.jpg :cheers:

Airbox sold (pending pickup & payment )

Airbox sold (pending pickup & payment )

second in line if this falls through. I can pick it up on the way to sydney this sunday as well. let me know if it does fall through.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...